Re: chrony auf amd64
Sascha Hüdepohl schrieb:
Hallo!
Ich hab richtige Probleme mit Chrony auf einem AMD64 Server bei 1und1.
Chrony will sich einfach nicht synchronisieren. "time is too variable"
Deshalb wollte ich mal in die Runde fragen, ob jemand hier auch
einen Server bei 1und1 und Erfahrungen mit Chrony oder irgendeinem
anderen ntp-Daemon hat.
verwende folgende Server: (warum weiss ich nicht mehr ...)
/etc/chrony/chrony.conf
server 134.130.4.17 minpoll 9
server 195.145.119.188 minpoll 9
server 130.149.17.21 minpoll 9
Schuss ins Blaue:
Verwendest du vielleicht Server aus unterschiedlichen Timezones (oder
macht das nix aus?).
Oder der Server braucht zu lange um zu "synchronisieren" Systemlast?
aus config zu den Servern:
# See www.pool.ntp.org for an explanation of these servers. Please
# consider joining the project if possible. If you can't or don't want to
# use these servers I suggest that you try your ISP's nameservers. We mark
# the servers 'offline' so that chronyd won't try to connect when the link
# is down. Scripts in /etc/ppp/ip-up.d and /etc/ppp/ip-down.d use chronyc
# commands to switch it on when the link comes up and off when it goes
# down. If you have an always-on connection such as cable omit the
# 'offline' directive and chronyd will default to online.
TIA
sascha
Grüsse & hth
MH
Reply to: