Re: Server verliert Netzwerkverbindung unter Etch

[Jan Luehr <listen@stephan.homeunix.net>]

ja hallo erstmal,..

Am Freitag, 18. August 2006 14:40 schrieb Dirk Ullrich:
> Das gibt es massig mögliche Ursachen. Um sich erstmal einen Überblick
> zu verschaffen:
> (1) Was hast Du sonst an PCI-Ressourcen?
>      (Was gibt z.B. "lspci" aus?)

00:00.0 Host bridge: Intel Corporation 955X Express Memory Controller Hub (rev 
81)
00:01.0 PCI bridge: Intel Corporation 955X Express PCI Express Root Port (rev 
81)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 
(rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express 
Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 
(rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 
(rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 
(rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 
(rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) 
AC'97 Audio Controller (rev 01)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface 
Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller 
(rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial 
ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 
01)
01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon 
X300 (PCIE)]
01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
02:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A (rev 
09)
02:00.1 PIC: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A 
(rev 09)
03:07.0 Ethernet controller: D-Link System Inc DL2000-based Gigabit Ethernet 
(rev 07)
04:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet 
Controller

> (2) Wie ist / sind Deine Netzwerkkarte / -karten konfiguriert?
>      (Inhalt von "/etc/network/interfaces")

# The loopback network interface
auto lo eth0 eth1
iface lo inet loopback

# The primary network interface
#allow-hotplug eth0
#iface eth0 inet dhcp
iface eth1 inet static
        address 192.168.1.204
        netmask 255.255.224.0
        broadcast 192.168.32.255
        gateway 192.168.1.253

iface eth0 inet static
        address 192.168.100.204
        netmask 255.255.255.0
#       broadcast 192.168.32.255
#       gateway 192.168.1.253

(eth0 ist die Inboard Intel-GBit, eth1, die D-Link LWL. Je nach dem, was ich 
gerade teste, kommentiere)

Keep smiling
yanosz