Re: sata libata-Treiber
On Wednesday 22 June 2005 13:32, Andreas Pakulat wrote:
>
>
> Sicher? Was sagt das Handbuch des MoBo? Was sagt lspci eines gestarteten
> Linux?
So jetzt sitz ich an der Quelle. desh |grep hda:
---schnipp---
ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdc:pio, hdd:pio
ide2: BM-DMA at 0xfc00-0xfc07, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdg:DMA, hdh:pio
hda: Maxtor 6Y080M0, ATA DISK drive
hdg: TOSHIBA DVD-ROM SD-M1912, ATAPI CDROM drive
hda: Maxtor 6Y080M0, 78167MB w/7936kB Cache, CHS=9964/255/63
hdg: ATAPI 48X DVD-ROM drive, 512kB Cache
hda: hda1 hda2 hda3
---schnapp---
Die Maxtor ist eine 80GB SATA
Motherboard ist Asrock K8 Upgrade VM800
jetzt lspci:
---schnipp---
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0204
00:00.1 Host bridge: VIA Technologies, Inc.: Unknown device 1204
00:00.2 Host bridge: VIA Technologies, Inc.: Unknown device 2204
00:00.3 Host bridge: VIA Technologies, Inc.: Unknown device 3204
00:00.4 Host bridge: VIA Technologies, Inc.: Unknown device 4204
00:00.7 Host bridge: VIA Technologies, Inc.: Unknown device 7204
00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b188
00:0f.0 IDE interface: VIA Technologies, Inc.: Unknown device 3149 (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. UHCI USB (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. UHCI USB (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc.: Unknown device 3104 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3227
00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio
Controlle r (rev
60)
00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev
78)
00:18.0 Host bridge: Advanced Micro Devices [AMD]: Unknown device 1100
00:18.1 Host bridge: Advanced Micro Devices [AMD]: Unknown device 1101
00:18.2 Host bridge: Advanced Micro Devices [AMD]: Unknown device 1102
00:18.3 Host bridge: Advanced Micro Devices [AMD]: Unknown device 1103
01:00.0 VGA compatible controller: VIA Technologies, Inc.: Unknown device 3108
(rev 01)
---schnapp---
> [....]
>
> Dann wird SATA nicht gestartet, ergo: Kein SATA im Kernel (bootest du
> deinen 2.6.11?) oder du hast keinen SATA-Controller. Was sagt lspci?
Ich boote das 2. Kompilat von 2.6.11 (/vmlinuz -> boot/vmlinuz-2.6.11.050621)
Ich werd hier grad gestört, guck aber noch auf die Asrock-Seite
> Andreas
Gruß Gebhard
Reply to: