Plantronics Headset (externe USB Soundkarte)
hallo,
ich versuche seit einiger Zeit erfolglos meine USB Soundkarte unter debian sarge zum laufen zu bringen. (kernel: 2.4.27)
Meine interne Notebook-Soundkarte (SIS) funktioniert, jedoch ist dort der MIC Eingang defekt.
Deshalb brauche ich die externe. (skype)
Angezeigt wird sie beim booten.
ich hab alsa-oss 1.0.8 vom source installiert.
OSS als Audio-Hardware gewählt.
unter XMMS kann ich nur /dev/dsp nutzen. /dev/dsp1 bis /dev/dsp3 funktionieren nicht.
(DSP-400 headset von Plantronics)
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=047f ProdID=0ca1 Rev= 0.04
S: Manufacturer=Plantronics
S: Product=Plantronics Headset
Hat die schon jemand am laufen oder eine Idee ?
Ich habe bereits Threads gefunden, in denen Sie angeblich unter SuSe & RedHat laufen soll.
Leider nichts im Bezug mit debian.
(ich bin SuSe schon am saugen, um zu testen. laufen soll sie aber unter debian.)
Grüsse,
Daniel Stobbe.
cat /proc/bus/usb/drivers
usbdevfs
hub
96-111: hiddev
hid
audio
cat /proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=d021e000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=047f ProdID=0ca1 Rev= 0.04
S: Manufacturer=Plantronics
S: Product=Plantronics Headset
S: SerialNumber=00050-0504044410003-V060000D
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=audio
I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=audio
I: If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=audio
E: Ad=01(O) Atr=09(Isoc) MxPS= 100 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=audio
E: Ad=01(O) Atr=09(Isoc) MxPS= 200 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=audio
I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=audio
E: Ad=84(I) Atr=09(Isoc) MxPS= 50 Ivl=1ms
I: If#= 2 Alt= 2 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=audio
E: Ad=84(I) Atr=09(Isoc) MxPS= 100 Ivl=1ms
I: If#= 2 Alt= 3 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=audio
E: Ad=84(I) Atr=09(Isoc) MxPS= 200 Ivl=1ms
I: If#= 3 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=3ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc=118/900 us (13%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=d021c000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c50a Rev=20.10
S: Manufacturer=Logitech
S: Product=USB Receiver
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
lsmod
Module Size Used by Not tainted
apm 9964 1 (autoclean)
mousedev 4148 1
audio 43384 2
hid 21220 0 (unused)
input 3648 0 [mousedev hid]
ohci1394 25488 0 (unused)
ieee1394 185988 0 [ohci1394]
usb-ohci 19528 0 (unused)
usbcore 62924 1 [audio hid usb-ohci]
trident 29168 2
ac97_codec 13300 0 [trident]
soundcore 3940 6 [audio trident]
pcigame 1544 0 [trident]
gameport 1676 0 [pcigame]
sis900 14060 1
crc32 2912 0 [sis900]
agpgart 46244 0 (unused)
nls_cp437 4348 2 (autoclean)
vfat 10540 1 (autoclean)
fat 31960 0 (autoclean) [vfat]
ide-cd 31296 0
cdrom 29828 0 [ide-cd]
rtc 6440 0 (autoclean)
ext3 81068 1 (autoclean)
jbd 42468 1 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
sis5513 11600 1 (autoclean)
ide-disk 16800 3 (autoclean)
ide-core 108568 3 (autoclean) [ide-cd ide-detect sis5513 ide-disk]
unix 14928 165 (autoclean)
vesafb 9416 63 (autoclean)
fbcon-cfb32 3816 0 (autoclean) [vesafb]
fbcon-cfb24 4488 0 (autoclean) [vesafb]
fbcon-cfb8 3560 0 (autoclean) [vesafb]
fbcon-cfb16 4136 0 (autoclean) [vesafb]
dmesg
Linux version 2.4.27-1-686 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-2)) #1 Wed Dec 1 19:57:47 JST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
BIOS-e820: 000000000f7f0000 - 000000000f7fffc0 (ACPI data)
BIOS-e820: 000000000f7fffc0 - 000000000f800000 (ACPI NVS)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
247MB LOWMEM available.
On node 0 totalpages: 63472
zone(0): 4096 pages.
zone(1): 59376 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 97 and too old
You can enable it with acpi=force
Kernel command line: root=/dev/hda6 ro vga=771
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1096.453 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2188.90 BogoMIPS
Memory: 244264k/253888k available (1196k kernel code, 9236k reserved, 451k data, 116k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1096.4970 MHz.
..... host bus clock speed is 99.6814 MHz.
cpu: 0, clocks: 996814, slice: 498407
CPU0<T0:996800,T1:498384,D:9,S:498407,C:996814>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xeb2e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router SIS5595 [1039/0008] at 00:01.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PCI: Found IRQ 10 for device 00:01.6
PCI: Sharing IRQ 10 with 00:01.1
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4180 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
Freeing initrd memory: 4180k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 116k freed
vesafb: framebuffer at 0x48000000, mapped to 0xd0024000, size 937k
vesafb: mode is 800x600x8, linelength=800, pages=15
vesafb: protected mode interface info at cb15:0004
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
SIS5513: IDE controller at PCI slot 00:00.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS630 ATA 100 (1st gen) controller
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:pio, hdd:pio
hda: HITACHI_DK23CA-20, ATA DISK drive
blk: queue d012ccc0, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [2432/255/63] p1 p2 < p5 p6 p7 p8 >
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: ide0(3,6): orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 389247
ext3_orphan_cleanup: deleting unreferenced inode 389246
ext3_orphan_cleanup: deleting unreferenced inode 389244
ext3_orphan_cleanup: deleting unreferenced inode 389240
EXT3-fs: ide0(3,6): 4 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 522040k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
Real Time Clock Driver v1.10f
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 196M
agpgart: Detected SiS 630 chipset
agpgart: AGP aperture is 64M @ 0x20000000
sis900.c: v1.08.07 11/02/2003
PCI: Found IRQ 10 for device 00:01.1
PCI: Sharing IRQ 10 with 00:01.6
eth0: ICS LAN PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x3200, IRQ 10, 00:90:f5:08:de:d2.
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10h, 20:01:33 Dec 1 2004
PCI: Found IRQ 5 for device 00:01.4
PCI: Sharing IRQ 5 with 00:0a.1
trident: SiS 7018 PCI Audio found at IO 0x3400, IRQ 5
ac97_codec: AC97 Audio codec, id: AKM2 (Asahi Kasei AK4543)
ac97_codec: AC97 Modem codec, id: SIL34 (Silicon Laboratory Si3036)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 11 for device 00:01.2
PCI: Sharing IRQ 11 with 00:01.3
usb-ohci.c: USB OHCI at membase 0xd021c000, IRQ 11
usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 11 for device 00:01.3
PCI: Sharing IRQ 11 with 00:01.2
usb-ohci.c: USB OHCI at membase 0xd021e000, IRQ 11
usb-ohci.c: usb-00:01.3, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: new USB device 00:01.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc50a) is not claimed by any active driver.
hub.c: new USB device 00:01.3-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x47f/0xca1) is not claimed by any active driver.
ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
PCI: Found IRQ 5 for device 00:0a.1
PCI: Sharing IRQ 5 with 00:01.4
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[24004000-240047ff] Max Packet=[2048]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000090f500000021]
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.00 Device [Plantronics Plantronics Headset] on usb2:2.3
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb1:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
usb.c: registered new driver audio
usbaudio: device 2 audiocontrol interface 0 has 1 input and 1 output AudioStreaming interfaces
usbaudio: device 2 interface 2 altsetting 1 channels 1 framesize 1 configured
usbaudio: valid input sample rate 6400
usbaudio: valid input sample rate 48000
usbaudio: device 2 interface 2 altsetting 1: format 0x00000040 sratelo 6400 sratehi 48000 attributes 0x01
usbaudio: device 2 interface 2 altsetting 2 channels 1 framesize 2 configured
usbaudio: valid input sample rate 6400
usbaudio: valid input sample rate 48000
usbaudio: device 2 interface 2 altsetting 2: format 0x00000010 sratelo 6400 sratehi 48000 attributes 0x01
usbaudio: device 2 interface 2 altsetting 3 channels 2 framesize 2 configured
usbaudio: valid input sample rate 6400
usbaudio: valid input sample rate 48000
usbaudio: device 2 interface 2 altsetting 3: format 0x01000010 sratelo 6400 sratehi 48000 attributes 0x01
usbaudio: device 2 interface 1 altsetting 0 does not have an endpoint
usbaudio: device 2 interface 1 altsetting 1 channels 1 framesize 2 configured
usbaudio: valid output sample rate 6400
usbaudio: valid output sample rate 48000
usbaudio: device 2 interface 1 altsetting 1: format 0x00000010 sratelo 6400 sratehi 48000 attributes 0x01
usbaudio: device 2 interface 1 altsetting 2 channels 2 framesize 2 configured
usbaudio: valid output sample rate 6400
usbaudio: valid output sample rate 48000
usbaudio: device 2 interface 1 altsetting 2: format 0x01000010 sratelo 6400 sratehi 48000 attributes 0x01
usbaudio: registered dsp 14,19
usbaudio: constructing mixer for Terminal 20 type 0x0301
usbaudio: registered mixer 14,32
usbaudio: constructing mixer for Terminal 13 type 0x0101
usbaudio: registered mixer 14,48
usb_audio_parsecontrol: usb_audio_state at ce349c20
audio.c: v1.0.0:USB Audio Class driver
mice: PS/2 mouse device common for all mice
eth0: Media Link On 100mbps full-duplex
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
sisfb: Video ROM found and mapped to 0xc00c0000
sisfb: Fatal error: Unable to reserve frame buffer memory
sisfb: Is there another framebuffer driver active?
Reply to: