Sarge erkennt nur 33 GB von 160 GB Harddisk
Hab gestern meine Workstation von Knoppix 3.3, Kernel 2.4.22 auf Sarge
(i386-netinst von 2004-07-23), Kernel 2.4.26-1-386 umgestellt.
Nun erkennt cfdisk 2.12 von /dev/hdb nurmehr
Size: 33820286976 bytes, 33.8 GB
statt der gesamten 160 GB.
/dev/hda wird von cfdisk korrekt mit
Size: 82348277760 bytes, 82.3 GB angezeigt.
Knoppix mit gleicher Version von cfdisk zeigt die volle Grösse von hdb an.
Das sagt
hdparm -I /dev/hdb
/dev/hdb:
ATA device, with non-removable media
Model Number: SAMSUNG SP1614N
Serial Number: S016J10X544146
Firmware Revision: TM100-24
Standards:
Supported: 7 6 5 4
Likely used: 7
Configuration:
Logical max current
cylinders 16383 65535
heads 16 1
sectors/track 63 63
--
CHS current addressable sectors: 4128705
LBA user addressable sectors: 66055248
LBA48 user addressable sectors: 66055248
device size with M = 1024*1024: 32253 MBytes
device size with M = 1000*1000: 33820 MBytes (33 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 1
Standby timer values: spec'd by Standard, no device specific
minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 254, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
SMART feature set
* FLUSH CACHE EXT command
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
* 48-bit Address feature set
Automatic Acoustic Management feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
Security:
[...]
Checksum: correct
Wie und wo kann ich das beheben?
Helmut Wollmersdorfer
Reply to: