[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Wie Netzwerkkarte als eth1 statt eth0 ?



Hi Joel HATSCH,

Joel HATSCH wrote:

> Hi *
> 
> habe folgendes Problem :
> auf meinem Laptop habe ich *entweder* eine Ethernet PCMCIA Karte dran,
> oder eine PCMCIA Wlan-Karte.
> nun wollte ich die eine als eth0 und die andere als eth1 im
> /etc/network/interfaces konfigurieren, leider scheint das hotplug (oder
> was auch immer) die vorhandene Karte als eth0 ifup'en zu wollen.
> 
> wie kann ich das ändern ?

Die Namen kommen direkt vom Kernel. Umbenennen kann man sie mit ifrename.
Ich empfehle dir aber "man interfaces" Sektion "KNOWN BUGS/LIMITATIONS".

|The ifup and ifdown programs work with so-called "physical" interface names.  These names are assigned  to  hard-
|ware  by  the  kernel.  Unfortunately it can happen that the kernel assigns different physical interface names to
|the same hardware at different times; for example, what was called "eth0" last time  you  booted  is  now  called
|"eth1"  and  vice versa.  This creates a problem if you want to configure the interfaces appropriately.  A way to
|deal with this problem is to use mapping scripts that choose logical interface names according to the  properties
|of  the interface hardware.  See the get-mac-address.sh script in the examples directory for an example of such a
|mapping script.  See also Debian bug #101728.

Da siehst du, wie man mit einem Skript ein Mapping realisiert. Du könntest
damit dann eth0 (Ethernet oder Wlan) nach eth0-ethernet und eth0-wlan
mappen.

Gruß
Martin

-- 
Martin Theiß <mtheiss@neo.wh-stutgart.de>
GPG-Fingerprint: EC80 53A2 F0A2 6E6C 74D2  CB6E 002A F6D3 E78B 7F45

The box said 'Requires Windows 95 or better', so I installed Linux - TKK 5

Attachment: signature.asc
Description: Digital signature


Reply to: