[xawtv] vollbild?
Hallo,
wenn ich in xawtv auf vollbildmodus schalte, habe ich das häufig
erwähnte Problem mit den schwarzen Rändern. Leider kann ich dennoch
meinen Fehler nicht finden.
Hier einige Angaben die vielleicht helfen:
[Hauppauge WinTV BT878, Voodoo Banshee]
#dmesg
Linux video capture interface: v1.00
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.83 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x]
bttv: Host bridge is VIA Technologies, Inc. VT82C596 Power Management
bttv: Bt8xx card found (0).
PCI: Found IRQ 9 for device 00:0b.0
PCI: Sharing IRQ 9 with 00:0b.1
bttv0: Bt878 (rev 17) at 00:0b.0, irq: 9, latency: 64, memory: 0xeb002000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Hauppauge eeprom: model=38104, tuner=Philips FI1216 MK2 (5), radio=no
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc2
bttv0: i2c attach [client=Philips PAL,ok]
i2c-core.o: client [Philips PAL] registered to adapter [bt848 #0](pos. 0).
bttv0: PLL: 28636363 => 35468950 ... ok
Vielen Dank im voraus
Steffen
--
Warum überquerte das Huhn die Straße?
Karl Marx:
Es war historisch unvermeidlich.
Reply to: