Re: kein Ton bei TV-Aufnahme [Bt878 + ALSA]
Jens Millitzer wrote:
Servus,
probiers mal mit :adevice=/dev/dsp1:
Hallo,
das hat leider nichts gebracht - dsp1 existiert anscheinend nicht:
Reading /home/alex/.mplayer/codecs.conf: 61 audio & 169 video codecs
File not found: 'frameno.avi'
Failed to open frameno.avi
Reading config file /home/alex/.mplayer/mencoder: No such file or directory
Font /home/alex/.mplayer/font/font.desc loaded successfully! (206 chars)
success: format: 9 data: 0x0 - 0x0
TV detected! ;-)
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
comment: first try, more to come ;-)
Selected device: BT878 video (Hauppauge (bt878))
Tuner cap:
Tuner rxs: MONO STEREO
Capabilites: video capture video overlay VBI capture device tuner
read/write streaming
supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M;
5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video; 3 = Composite3;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : STEREO
unable to open '/dev/dsp1': No such device
============ Sorry, this file format is not recognized/supported
=============
=== If this file is an AVI, ASF or MPEG stream, please contact the
author! ===
Cannot open demuxer.
Exiting...
Weiterhin ist mir aufgefallen, dass bei alsamixer als Karte "Dummy" und
als Chip "Dummy Mixer" ausgewählt ist und nicht meine snd1370! Auch
hier ist was nicht in Ordnung!
Woran liegt das?
Danke im voraus,
Alex
Reply to: