[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

cdrecord beendet mit fehlercode 254

Hab versucht mit 2.4.22er kernel und ide-scsi unter debian cds zu
brennen und jetzt mit 2.6.1 und ide-cd, ist bis jetzt noch nicht
Hat jemand eine ahnung was das folgende k3b-log zu bedeuten hat?

Dank, Dominik

scsidev: '/dev/hdg'
devname: '/dev/hdg'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
Cdrecord-Clone 2.01a24 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'ATAPI   '
Identifikation : 'CD-R/RW 32X10   '
Revision       : 'T.IA'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Supported modes: TAO PACKET SAO RAW/R16 RAW/R96R
Drive buf size : 1630208 = 1592 KB
FIFO size      : 2097152 = 2048 KB
Track 01: data    50 MB        
Total size:       57 MB (05:42.12) = 25659 sectors
Lout start:       57 MB (05:44/09) = 25659 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -12369 (97:17/06)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 69
Manufacturer: Moser Baer India Limited
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 334190
Starting to write CD/DVD at speed 16 in dummy SAO mode for single
Last chance to quit, starting dummy write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Sending CUE sheet...
cdrecord.mmap: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:    0 of   50 MB written.
Track 01:    1 of   50 MB written (fifo  53%) [buf  85%]  36.3x.
cdrecord.mmap: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 03 B1 00 00 1F 00
status: 0x4 (CONDITION MET/GOOD)
resid: 63488
cmd finished after 30.459s timeout 200s
cdrecord.mmap: A write error occured.
cdrecord.mmap: Please properly read the error message above.
write track data: error after 1935360 bytes
Writing  time:   54.610s
Average write speed   6.3x.
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    0.001s
cdrecord.mmap: fifo had 63 puts and 32 gets.
cdrecord.mmap: fifo was 0 times empty and 7 times full, min fill was

cdrecord comand:
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdg speed=16 -dao -dummy
-eject -overburn -data -tsize=25659s - 

Reply to: