ipppd: Can't open options file ipppd.ippp0
Hallo Liste!
Meine ISDN Karte bzw. der ipppd lässt sich auf meinem gerade installierten
unstable Debian nicht starten. Ich habe schon rumprobiert und gegoogled,
aber die Howtos gehen davon aus, dass das ISDN Subsystem funktioniert,
nachdem man mit modconf die Karte (bei mir AVM Fritz!PCI v2 - fcpcipnp.o)
aktiviert und mit isdnconfig die Konfiguration erzeugt (und danach editiert
hat). Leider ist das bei mir nicht der Fall.
In den logs kann ich eingehende Anrufe sehen, was ja bedeutet, dass die
Karte und isdnlog funktionieren. Ifconfig zeigt ein ippp0 interface an.
Ich denke ich habe einfach nur irgendetwas übersehen oder so..
Ich habe versucht alle Informationen zusammenzutragen. Den Inhalt der
Konfiguration habe ich nicht angehangen, da die Nachricht sonst sicherlich
zu lang würde..
Vielen dank fürs lesen!
Frohes Fest
Jürgen Scholz
# dmesg
[...]
ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded
PPP BSD Compression module registered
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 1.1.4.1
HiSax: Layer2 Revision 1.1.4.1
HiSax: TeiMgr Revision 1.1.4.1
HiSax: Layer3 Revision 1.1.4.1
HiSax: LinkLayer Revision 1.1.4.1
HiSax: Certification not verified
hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0
hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1
HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 (0)
HiSax: DSS1 Rev. 1.1.4.1
HiSax: 2 channels added
HiSax: MAX_WAITING_CALLS added
hisax_fcpcipnp: found adapter Fritz!Card PCI v2 at 01:06.0
[...]
# /etc/init.d/isdnutils start
Starting ISDN services: interfacesisdn: Verbose-Level is 2
ipppd/usr/sbin/ipppd: Can't open options file ipppd.ippp0: No such file or
directory
iprofd isdnlog.
Dabei erscheint in den messages:
Dec 25 11:52:00 schimmelrouter kernel: isdn: Verbose-Level is 2
Dec 25 11:52:00 schimmelrouter ipppd: Exit.
# ipppd < /etc/isdn/ipppd.ippp0
Sorry - this system lacks PPP kernel support.
Check whether you configured at least the ippp0 device!
#lsmod
[...]
ppp_async 6976 0 (unused)
isdnhdlc 3856 0 (unused)
hisax_fcpcipnp 4832 3
hisax_isac 4472 0 [hisax_fcpcipnp]
hisax 440900 0 [hisax_fcpcipnp hisax_isac]
isa-pnp 26564 0 [hisax_fcpcipnp hisax]
isdn_bsdcomp 5676 0 (unused)
isdn 110208 4 [hisax isdn_bsdcomp]
via-rhine 12528 1
mii 2016 0 [via-rhine]
crc32 2848 0 [via-rhine]
ppp_deflate 2968 0 (unused)
zlib_deflate 16120 0 [ppp_deflate]
ppp_synctty 5600 0 (unused)
ppp_generic 18300 0 [ppp_async ppp_deflate ppp_synctty]
slhc 4528 0 [isdn ppp_generic]
[...]
# ls /etc/isdn/
charge.dat iprofd.data rate.conf xisdnload-netup
charge.dat.old isdn.conf stop xmonisdn-netdown
device.ippp0 isdnlog.isdnctrl0 vboxd.conf xmonisdn-netup
init.d.functions isdnlog.users vboxgetty.conf
ipppd.ippp0 isdnrate.conf xisdnload-netdown
# isdnctrl dial ippp0
isdn_ppp_bind: Can't find a (free) connection to the ipppd daemon.
ippp0: Resource temporarily unavailable
# ifconfig
[...]
ippp0 Link encap:Point-to-Point Protocol
inet addr:192.25.206.10 P-t-P:10.0.0.2 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:30
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[...]
Reply to: