RE:Probleme mit ISDN
Sorry habe den Benutzernamen geändert, aber leider immer noch keine Einwahl.
muss der name in hochkomma stehen?
Ich weiß nicht mehr weiter, device da, PAP-secret richtig
Aber
Jul 26 01:50:08 digi kernel: ippp1: dialing 1 01938792...
Jul 26 01:50:16 digi kernel: isdn_net: local hangup ippp1
Jul 26 01:50:16 digi kernel: ippp1: Chargesum is 0
Modconf und meine Module ISDN
+ Support BSD compression ?
isdn Allgemeine Routinen für ISDN-Karten
+ AVM Fritz!Card PCI/PCIv2/PnP support
+ AVM Fritz!Card PCI/PCIv2/PnP support
+hisax+ Gerätetreibers für alle Karten mit Siemens HiSax
+dss1_divert + ISDN diversion services support
________________________________________________________________________
Jul 26 01:32:41 digi kernel: HiSax: Linux Driver for passive ISDN cards
Jul 26 01:32:41 digi kernel: HiSax: Version 3.5 (module)
Jul 26 01:32:41 digi kernel: HiSax: Layer1 Revision 1.1.4.1
Jul 26 01:32:41 digi kernel: HiSax: Layer2 Revision 1.1.4.1
Jul 26 01:32:41 digi kernel: HiSax: TeiMgr Revision 1.1.4.1
Jul 26 01:32:41 digi kernel: HiSax: Layer3 Revision 1.1.4.1
Jul 26 01:32:41 digi kernel: HiSax: LinkLayer Revision 1.1.4.1
Jul 26 01:32:41 digi kernel: HiSax: Approval certification valid
Jul 26 01:32:41 digi kernel: HiSax: Approved with ELSA Microlink PCI cards
Jul 26 01:32:41 digi kernel: HiSax: Approved with Eicon Technology Diva
2.01 PCI cards
Jul 26 01:32:41 digi kernel: HiSax: Approved with Sedlbauer Speedfax + cards
Jul 26 01:32:41 digi kernel: HiSax: Approved with HFC-S PCI A based cards
Jul 26 01:32:41 digi kernel: hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0
Jul 26 01:32:41 digi kernel: hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP
ISDN driver v0.0.1
Jul 26 01:32:41 digi kernel: HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 (0)
Jul 26 01:32:41 digi kernel: HiSax: DSS1 Rev. 1.1.4.1
Jul 26 01:32:41 digi kernel: HiSax: 2 channels added
Jul 26 01:32:41 digi kernel: HiSax: MAX_WAITING_CALLS added
Jul 26 01:32:41 digi kernel: PCI: Found IRQ 11 for device 00:14.0
Jul 26 01:32:41 digi kernel: hisax_fcpcipnp: found adapter Fritz!Card
PCI at 00:14.0
________> Beim starten von isdnutils aus /var/log/syslog________________
Jul 26 01:34:31 digi isdnlog: Holiday Version 1.10-Germany [12-Apr-1999]
loaded [11 entries from /usr/share/isdn/holiday-de.dat]
Jul 26 01:34:31 digi isdnlog: Dest V1.01: File
'/usr/share/isdn/dest.cdb' opened fine - Dest 1.0 int (+h) AT DE NL CH
Jul 26 01:34:31 digi isdnlog: Zone V1.25: Provider 0 File
'/usr/share/isdn/zone-de-dtag.cdb' opened fine - V1.25 K2 C2 N256
T157147 O1 L5
Jul 26 01:34:31 digi isdnlog: Rates Version 2.02 [10-Mar-2002
19:03:33] loaded [51 Providers, 387 Zones, 1780 Areas, 42 Services, 310
Comments, 0 eXceptions, 6 Redirects, 1220 Rates from
/usr/share/isdn/rate-de.dat]
Jul 26 01:34:31 digi isdnlog: (ISDN subsystem with ISDN_MAX_CHANNELS >
16 detected, ioctl(IIOCNETGPN) is available)
Jul 26 01:34:31 digi isdnlog: isdn.conf:2 active channels, 0 MSN/SI entries
Jul 26 01:34:31 digi isdnlog: (Data versions: iprofd=0x06 net_cfg=0x06
/dev/isdninfo=0x01)
Jul 26 01:34:31 digi isdnlog: Everything is fine, isdnlog-4.57 is
running in full featured mode.
SO, sieht ja alles ganz gut aus, aber wenn ich jetzt
isdnctrl dial ippp1 eingebe bekomme ich folgende Ausgabe
Jul 26 01:50:08 digi kernel: ippp1: dialing 1 01938792...
Jul 26 01:50:16 digi kernel: isdn_net: local hangup ippp1
Jul 26 01:50:16 digi kernel: ippp1: Chargesum is 0
Keine Verbindung zum Provider, mein Isdn device wird mittels ifconfig
angezeigt. ippp0 ist da aber keine Einwahl.
Ich habe schon dual win98 installiert und an der selben leitung mit der
selben Karte isdnverbindung erhalten. Also Karte o.k. Leitung o.k.
HMMM hilfe wer kann helfen??
_________________________________________________________________________
DIE WICHTIGSTEN AUSZÜGE AUS MEINER /device.ippp1
LOCALIP=10.0.0.1 # XXX_
REMOTEIP=10.0.0.2 # XXX_
LOCALMSN=7618978866 # XXX_
REMOTEMSN=01938792 # XXX_
DIALMODE=manual # XXX_ other values can be 'on' and 'off'
_________________________________________________________________________
AUSZÜGE AUS MEINER /etc/isdn/ipppd.ippp1
# ppp handshake : tuning
lcp-restart 1 # Set timeout for LCP
# AUTHENTICATION
name 12018 # set local name for auth XXX_
# COMPRESSION
noccp # compression negotation on/off
nolzs # LZS compression off (not yet supported fully)
_______________________________________________________________________________
AUSZÜGE AUS MEINER /etc/isdn/isdn.conf
[GLOBAL]
COUNTRYPREFIX = +
COUNTRYCODE = 49
AREAPREFIX = 0
# EDIT THIS LINE:
AREACODE =761
________________________________________________________________________
AUSZÜGE AUS MEINER /etc/ppp/pap-secrets
# Here you should add your userid password to connect to your providers #via
# PAP. The * means that the password is to be used for ANY host you #connect
# to. Thus you do not have to worry about the foreign machine name. Just
# replace password with your password.
# If you have different providers with different passwords then you better
# remove the following line.
#xxxxxx@q-dsl.de * xxxxxx
12018 * 587569
# LOGIN UND PASS FAKE !!!
# Added by automatic ipppd configuration
--
Haeufig gestellte Fragen und Antworten (FAQ):
http://www.de.debian.org/debian-user-german-FAQ/
Zum AUSTRAGEN schicken Sie eine Mail an
debian-user-german-request@lists.debian.org
mit dem Subject "unsubscribe". Probleme? Mail an
listmaster@lists.debian.org (engl)
Reply to: