Jens Wolfgarten schrieb:
linux:/home/jens# fdisk /dev/sda The number of cylinders for this disk is set to 30515. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/sda: 250.9 GB, 250999209984 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 1217 9775521 b Win95 FAT32 /dev/sda2 1218 30515 235336185 83 Linux Command (m for help): Die Filesysteme habe ich danach manuell erzeugt.
Wie? Nur mit mkfs.vfat bzw mkfs.ext3?
Wenn ich diese Platte nun mounte dann ergibt ein linux:/home/jens# df -H folgendes Ergebnis:Hast du den Hinweis in der Manpage gelesen, daß die ersten 512-Bytes zu löschen sind?/dev/sda1 251G 33k 251G 1% /backupvfat /dev/sda2 238G 34M 226G 1% /backupe3Das ist aber natürlich quatsch. Denn /dev/sda1 ist ja nur 10GB. /dev/sda2 scheint aber zu stimmen. Wer kann mir sagen, was hier falsch läuft?
War eine der Partitionen vor/während der Partitionierung gemountet? Was meint der Verify-Befehl bei fdisk? Thomas -- SDG - System Design Group GmbH => Tel. +49 89 54 828 979 Dachauer Strasse 38 => Fax. +49 89 55 028 719 80335 Muenchen, Germany => E-Mail: info@sdg.de