Hauppauge eeprom: invalid
Hallo,
seit einem Rechnerabsturz funktioniert meine TV-Karte nicht mehr
fritzam@a1:~$ xawtv
This is xawtv-3.72, running on Linux/i686 (2.4.20)
v4l: timeout (got SIGALRM), hardware/driver problems?
ioctl: VIDIOCSYNC(0): Interrupted system call
ioctl: VIDIOCMCAPTURE(0,fmt=4,size=48x32): Device or resource busy
ioctl: VIDIOCMCAPTURE(0,fmt=1,size=48x32): Device or resource busy
ioctl: VIDIOCMCAPTURE(0,fmt=7,size=48x32): Device or resource busy
ioctl: VIDIOCMCAPTURE(0,fmt=13,size=48x32): Device or resource busy
ioctl: VIDIOCMCAPTURE(0,fmt=15,size=48x32): Device or resource busy
no way to get: 384x288 32 bit TrueColor (LE: bgr-)
fritzam@a1:~$
a1:~# modprobe bttv
Using /lib/modules/2.4.20/kernel/drivers/media/video/tuner.o
insmod: a module named tuner already exists
/lib/modules/2.4.20/kernel/drivers/media/video/bttv.o: post-install bttv
failed
/lib/modules/2.4.20/kernel/drivers/media/video/bttv.o: insmod bttv failed
in /var/log/kern.log wir folgendes geloggt:
Jun 26 22:28:03 a1 kernel: bttv: driver version 0.7.96 loaded
Jun 26 22:28:03 a1 kernel: bttv: using 4 buffers with 2080k (8320k total)
for capture
Jun 26 22:28:03 a1 kernel: bttv: Host bridge is PCI device 1106:3099
Jun 26 22:28:03 a1 kernel: bttv: Bt8xx card found (0).
Jun 26 22:28:03 a1 kernel: bttv0: Bt878 (rev 2) at 00:07.0, irq: 11,
latency: 64, mmio: 0x9ddfc000
Jun 26 22:28:03 a1 kernel: bttv0: detected: Hauppauge WinTV [card=10], PCI
subsystem ID is 0070:13eb
Jun 26 22:28:03 a1 kernel: bttv0: using: BT878(Hauppauge (bt878))
[card=10,autodetected]
Jun 26 22:28:03 a1 kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line
init [5]
Jun 26 22:28:03 a1 kernel: tuner: probing bt848 #0 i2c adapter
[id=0x10005]
Jun 26 22:28:03 a1 kernel: i2c-core.o: adapter bt848 #0 registered as
adapter 1.
Jun 26 22:28:03 a1 kernel: bttv: readee error
Jun 26 22:28:03 a1 kernel: bttv0: Hauppauge eeprom: invalid
Jun 26 22:28:03 a1 kernel: bttv0: Hauppauge eeprom: model=0, tuner= (4),
radio=no
Jun 26 22:28:03 a1 kernel: bttv0: using tuner=4
Jun 26 22:28:03 a1 kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not
found
Jun 26 22:28:03 a1 kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not
found
Jun 26 22:28:03 a1 kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not
found
Jun 26 22:28:03 a1 kernel: bttv0: registered device video0
Jun 26 22:28:03 a1 kernel: bttv0: registered device vbi
Kann das sein, dass der eeprom irgendwas abbekommen hat? (ich hab mal
gehoert, dass man den vorher absichern sollte)
Oder hat sonst jemand ne Idee?
Gruss Achim
Reply to: