System hängt mit 3 com Cardbus NIC
Hallo!
Ich habe seit einiger Zeit ein ziemliche Problem mit meiner
Netzwerkkarte (3com Cardbus) Wenn ich längere Zeit eine Verbindung ins
Internet habe (DSL oder Ethernet), bleibt mein System stehen, und zwar
vollständig. (keine Alt -F1-F6, aber auch der Fn-Key funktioniert
nicht mehr, genausowenig wie SysReq)
Zunächst dachte ich es liegt am Kernel und habe neuere ausprobiert,
ich habe auch schon das PCMCIA Paket ausgetauscht/selbst kompiliert,
außerdem habe ich mittlerweile 3 Dists ausprobiert (Mandrake 8.2,
Suse, und jetzt Debian Woody).
Es macht auch keinen unterschied, ob ich Suspend benutze oder nicht
(ich dachte zunächst es läge ev. an apm). Manchmal bricht das System
wenige min. nach Aufbau einer Verbindung zusammen, manchmal kann ich
wochenlang den Rechner in suspend Mode fahren und wieder einschalten,
bis irgendwann das System stehen bleibt.
Den Speicher habe ich mal überpüft, der scheint keine Probleme zu
haben.
Im Syslog sind auch weiter keine Informationen zu finden, das wird
bricht einfach an der entsprechenden Stelle ab. (s.u.)
Wer hat Ideen, wie ich die Ursache weiter einkreisen kann?
Vielen Dank für jede Hilfe!
Florian
Es folgen einige System Informationen:
-------------------------------------------------------------------
System: Toshiba Satellite 230 CX (P 133 MMX, 64 MB Ram, 4GB HD(hda:
IBM-DADA-24860, ATA DISK drive))
NIC: 10/100 LAN Cardbus 3CXFE575CT
--------------------------------------------------------------------
[Auszug aus dmesg]
------------------
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16)
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Enabling device 00:02.0 (0004 -> 0006)
PCI: Enabling device 00:02.1 (0004 -> 0006)
Toshiba ToPIC95-B rev 07 PCI-to-CardBus at slot 00:02, mem 0x10000000
host opts [0]: [slot 0xd0] [ccr 0x1d] [cdr 0x86] [rcr 0x02] [pci irq 11] [la
t 168/176] [bus 20/20]
host opts [1]: [slot 0xd0] [ccr 0x2d] [cdr 0x86] [rcr 0x02] [pci irq 11] [la
t 168/176] [bus 21/21]
ISA irqs (default) = 3,4,5,7,9,10,12 PCI status changes
parport0: PC-style at 0x278 (0x678) [PCSPP,TRISTATE]
parport0: irq 5 detected
lp0: using parport0 (polling).
cs: cb_alloc(bus 21): vendor 0x10b7, device 0x5257
3c59x.c:v0.99Q 5/16/2000 Donald Becker, becker@scyld.com
http://www.scyld.com/network/vortex.html
cs: cb_config(bus 21)
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x388-0x38f 0
x3c0-0x3df 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0230-0x032f: clean.
cs: IO port probe 0x0338-0x0387: clean.
cs: IO port probe 0x0390-0x03bf: clean.
cs: IO port probe 0x03e0-0x047f: clean.
cs: IO port probe 0x0490-0x04cf: clean.
cs: IO port probe 0x04d8-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
fn 0 bar 1: io 0x800-0x8ff
fn 0 bar 2: mem 0x60021000-0x6002107f
fn 0 bar 3: mem 0x60020000-0x6002007f
fn 0 rom: mem 0x60000000-0x6001ffff
irq 11
cs: cb_enable(bus 21)
bridge io map 0 (flags 0x21): 0x800-0x8ff
bridge mem map 0 (flags 0x1): 0x60000000-0x60021fff
vortex_attach(device 15:00.0)
eth0: 3Com 3CCFE575CT Tornado CardBus at 0x800, 00:00:80:60:10:90, IRQ 11
product code 'ZE' rev 10.0 date 12-22-00
eth0: CardBus functions mapped 60020000->c4895000.
8K byte-wide RAM 5:3 Rx:Tx split, MII interface.
MII transceiver found at address 0, status 7809.
Enabling bus-master transmits and whole-frame receives.
--------------------------------------------------------------------------
[Ausschnitt aus /var/log/messages]
----------------------------------
Oct 28 09:42:45 reichertnet kernel: product code 'ZE' rev 10.0 date 12-22-00
Oct 28 09:42:45 reichertnet kernel: eth0: CardBus functions mapped 60020000->c48
92000.
Oct 28 09:42:45 reichertnet kernel: 8K byte-wide RAM 5:3 Rx:Tx split, MII inte
rface.
Oct 28 09:42:45 reichertnet kernel: MII transceiver found at address 0, status
7809.
Oct 28 09:42:45 reichertnet kernel: Enabling bus-master transmits and whole-fr
ame receives.
Oct 28 09:43:04 reichertnet pppd[1701]: pppd 2.4.1 started by root, uid 0
Oct 28 09:43:04 reichertnet pppd[1701]: Serial connection established.
Oct 28 09:43:04 reichertnet pppd[1701]: Using interface ppp0
Oct 28 09:43:04 reichertnet pppd[1701]: Connect: ppp0 <--> /dev/pts/1
Oct 28 09:43:09 reichertnet pppd[1701]: local IP address 217.82.227.244
Oct 28 09:43:09 reichertnet pppd[1701]: remote IP address 217.5.98.50
Oct 28 09:43:09 reichertnet pppd[1701]: primary DNS address 212.185.249.50
Oct 28 09:43:09 reichertnet pppd[1701]: secondary DNS address 194.25.2.129
[Hier System freeze ....]
Oct 28 10:00:30 reichertnet syslogd 1.4.1#10: restart.
----------------------------------------
Reply to: