Hallo Leute, seit Tagen such ich ein Lösung um mit minicom folgende einstellung zu realiesieren: --- auszug --- Open your terminal emulator, and then set the following connection properties: Com Port: <COM1, COM2, etc., depending on your computer> Baud rate: 9600 Data Bits: 8 Stop bits: 1 Flow Control: None Parity: None Enable the "ASCII Setup" settings by selecting "Send line ends with line feeds". Result: HyperTerminal sends a line return at the end of each line of code. --- end --- Mit diesen Einstellungen kann ich ein AP-3 von Avaya konfigurieren (unter WinXX). Das muß doch auch mit Linux Mitteln möglich sein? Es wäre schade, das ich wegen einer Comandline zurück zu Win müßte. -- Lothar mailto:L.Schweikle@logout.de >> Reue ist der Verstand, der zu spät kommt.
Attachment:
pgpJuo2xee2qz.pgp
Description: PGP signature