Re[2]: XServer mit ATI r128
...ich glaube Dir ist am besten geholfen, wenn ich Dir meine Methode
kurz erläutere:
- lösche /etc/X11/XF86Config-4 und /etc/X11/XF86Config
- starte xf86cfg -textmode
- arbeite Dich durch alle Menues
- rufe scanpci -v auf und suche im Output die Linie "pci bus 0x1 ..."
- merke Dir von dieser Linie die letzte Angabe "device 0x5246"
- editiere /etc/X11/XF86Config-4
- suche die Section "Device" und füge eine Linie ChipID 0x5246 unter
Angabe der gemerkten Zahl an. Die Angabe nach ChipID darf nicht in ""
stehen!
- gib als Driver "r128" an, falls das nicht geht "ati" (die
Fehlermeldung würde "No Screens found" heissen)
- falls es so nicht geht probiere es ohne ChipID...zu Deiner Karte
findest Du sicher auch infos bei http://debianforum.de oder im Beitrag
http://www.xfree86.org/pipermail/xpert/2001-July/009950.html
- es reichen 3 Zeilen in der section "Device":
Identifier, Driver und ChipID
- saven und try startx...
...ich hoffe so geht's. Die Auto-Kartenerkennung hat manchmal Probleme
und mit ChipID kann man den Driver zur Benutzung einer bestimmten Karte
zwingen(?). Manchmal z.B. bei der ATI Radeon 7500 (0x5157) muss die
ChipID der Radeon VE (0x5159) angegeben werden, da es sonst irgendwie
nicht klappt.
Viel Glück...
Adrian.
On Fri, 20 Sep 2002 12:18:12 +0200
"gangrene" <ka.news.lin@web.de> wrote:
> Hi!
>
> Sorry, war ne Woche abwesend, hatte auch nicht mehr mit
> einer Reaktion grechnet. Bin noch nicht weitergekommen,
> xserver bricht immer noch mit der gleichen Fehlermeldung
> ab (s.u.), bin fuer jede Idee dankbar
>
> Gruss, gangrene
>
>
> > -----Ursprüngliche Nachricht-----
> > Von: Adrian Zaugg
> > Gesendet: Freitag, 13. September 2002 07:02
> > An: # gangrene
> > Betreff: Re: XServer mit ATI r128
> >
> >
> >
> > Hast Du Dein Problem gelöst?
> >
> > Grüsse, Adrian.
> >
> > --
> > Adrian Zaugg <az@camco.ch>
> >
>
> > > -----Ursprüngliche Nachricht-----
> > > Von: gangrene
> > > Gesendet: Mittwoch, 4. September 2002 17:23
> > > An: debian-user-german@lists.debian.org
> > > Betreff: XServer mit ATI r128
> > >
> > >
> > > Hi G.
> > >
> > > Ich habe folgendes Problem mit XServer und ATI RageFury (AGP)
> > > auf Debian "Woody" (Kernel 2.4, Xfree86 4.1.0.1):
> > >
> > > _/etc/X11/XF86config-4_ wurde ueber _dpkg-reconfigure xserver-xfree86_
> > > erstellt. Nach einigen manuellen Eingriffen habe ich alle Fehler (EE)
> > > eleminieren koennen. Nun bekomme ich folgenden Fehler beim Versuch, den
> > > XServer zu
> > > starten:
> > >
> > > <cut>
> > > Symbol fbPictureInit from module
> > /usr/X11R6/lib/modules/drivers/r128_drv.o
> > > is unresolved!
> > >
> > > Fatal server error:
> > > Caught signal 11. Server aborting
> > > </cut>
> > >
> > > An dieser Stelle komme ich einfach nicht weiter.
> > > Kann mir jemand bei diesem Problem helfen?
> > >
> > > thnx, gangre
> > >
> > > #################################
> > > /var/log/XFree86.0.log:
> > > #################################
> > > This is a pre-release version of XFree86, and is not supported in any
> > > way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
> > > to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
> > > please check the latest version in the XFree86 CVS repository
> > > (http://www.XFree86.Org/cvs)
> > >
> > > XFree86 Version 4.1.0.1 / X Window System
> > > (protocol Version 11, revision 0, vendor release 6510)
> > > Release Date: 21 December 2001
> > > If the server is older than 6-12 months, or if your card is
> > > newer than the above date, look for a newer version before
> > > reporting problems. (See http://www.XFree86.Org/FAQ)
> > > Build Operating System: Linux 2.4.17 i686 [ELF]
> > > Module Loader present
> > > (==) Log file: "/var/log/XFree86.0.log", Time: Wed Sep 4 18:37:10 2002
> > > (==) Using config file: "/etc/X11/XF86Config-4"
> > > Markers: (--) probed, (**) from config file, (==) default setting,
> > > (++) from command line, (!!) notice, (II) informational,
> > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > > (==) ServerLayout "Default Layout"
> > > (**) |-->Screen "Default Screen" (0)
> > > (**) | |-->Monitor "ICL ErgoPRO VE15C"
> > > (**) | |-->Device "ATI Rage Fury"
> > > (**) |-->Input Device "Generic Keyboard"
> > > (**) Option "XkbRules" "xfree86"
> > > (**) XKB: rules: "xfree86"
> > > (**) Option "XkbModel" "pc104"
> > > (**) XKB: model: "pc104"
> > > (**) Option "XkbLayout" "de_DE"
> > > (**) XKB: layout: "de_DE"
> > > (**) Option "XkbVariant" "de_DE"
> > > (**) XKB: variant: "de_DE"
> > > (==) Keyboard: CustomKeycode disabled
> > > (**) |-->Input Device "Configured Mouse"
> > > (**) |-->Input Device "Generic Mouse"
> > > (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
> > > Entry deleted from font path.
> > > (**) FontPath set to
> > > "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:uns
> > > caled,/usr
> > > /lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X
> > > 11/fonts/S
> > > peedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
> > > (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> > > (==) ModulePath set to "/usr/X11R6/lib/modules"
> > > (--) using VT number 7
> > >
> > > (WW) Cannot open APM
> > > (II) Module ABI versions:
> > > XFree86 ANSI C Emulation: 0.1
> > > XFree86 Video Driver: 0.4
> > > XFree86 XInput driver : 0.2
> > > XFree86 Server Extension : 0.1
> > > XFree86 Font Renderer : 0.2
> > > (II) Loader running on linux
> > > (II) LoadModule: "bitmap"
> > > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> > > (II) Module bitmap: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > Module class: XFree86 Font Renderer
> > > ABI class: XFree86 Font Renderer, version 0.2
> > > (II) Loading font Bitmap
> > > (II) LoadModule: "pcidata"
> > > (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> > > (II) Module pcidata: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 0.1.0
> > > ABI class: XFree86 Video Driver, version 0.4
> > > (II) PCI: Probing config type using method 1
> > > (II) PCI: Config type is 1
> > > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
> > > (II) PCI: PCI scan (all values are in hex)
> > > (II) PCI: 00:00:0: chip 1106,0598 card 0000,0000 rev 04 class
> > 06,00,00 hdr
> > > 00
> > > (II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class
> > 06,04,00 hdr
> > > 01
> > > (II) PCI: 00:07:0: chip 1106,0596 card 1106,0000 rev 23 class
> > 06,01,00 hdr
> > > 80
> > > (II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 10 class
> > 01,01,8a hdr
> > > 00
> > > (II) PCI: 00:07:3: chip 1106,3050 card 0000,0000 rev 30 class
> > 06,00,00 hdr
> > > 00
> > > (II) PCI: 00:12:0: chip 1000,0001 card 1000,1000 rev 23 class
> > 01,00,00 hdr
> > > 00
> > > (II) PCI: 00:14:0: chip 10ec,8139 card 10ec,8139 rev 10 class
> > 02,00,00 hdr
> > > 00
> > > (II) PCI: 01:00:0: chip 1002,5246 card 1002,0448 rev 00 class
> > 03,00,00 hdr
> > > 00
> > > (II) PCI: End of PCI scan
> > > (II) LoadModule: "scanpci"
> > > (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> > > (II) Module scanpci: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 0.1.0
> > > ABI class: XFree86 Video Driver, version 0.4
> > > (II) UnloadModule: "scanpci"
> > > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> > > (II) Host-to-PCI bridge:
> > > (II) PCI-to-ISA bridge:
> > > (II) Host-to-PCI bridge:
> > > (II) PCI-to-PCI bridge:
> > > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
> > > (II) Bus 0 I/O range:
> > > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> > > (II) Bus 0 non-prefetchable memory range:
> > > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> > > (II) Bus 0 prefetchable memory range:
> > > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> > > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
> > > (II) Bus 1 I/O range:
> > > [0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
> > > [1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
> > > [2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
> > > [3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
> > > (II) Bus 1 non-prefetchable memory range:
> > > [0] -1 0 0xe0000000 - 0xe1ffffff (0x2000000) MX[B]
> > > (II) Bus 1 prefetchable memory range:
> > > [0] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B]
> > > (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
> > > (II) Bus -1 I/O range:
> > > (II) Bus -1 non-prefetchable memory range:
> > > (II) Bus -1 prefetchable memory range:
> > > (II) Bus -1: bridge is at (0:0:0), (-1,-1,0), BCTRL: 0x08
> > (VGA_EN is set)
> > > (II) Bus -1 I/O range:
> > > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> > > (II) Bus -1 non-prefetchable memory range:
> > > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> > > (II) Bus -1 prefetchable memory range:
> > > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> > > (--) PCI:*(1:0:0) ATI Rage 128 RF rev 0, Mem @ 0xdc000000/26,
> > > 0xe1000000/14,
> > > I/O @ 0xd000/8
> > > (II) Addressable bus resource ranges are
> > > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> > > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> > > (II) OS-reported resource ranges:
> > > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> > > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> > > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > > (II) Active PCI resource ranges:
> > > [0] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
> > > [1] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[B]
> > > [2] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
> > > [3] -1 0 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
> > > [4] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
> > > [5] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
> > > [6] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
> > > [7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
> > > [8] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> > > (II) Active PCI resource ranges after removing overlaps:
> > > [0] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
> > > [1] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[B]
> > > [2] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
> > > [3] -1 0 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
> > > [4] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
> > > [5] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
> > > [6] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
> > > [7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
> > > [8] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> > > (II) OS-reported resource ranges after removing overlaps with PCI:
> > > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> > > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> > > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > > (II) All system resource ranges:
> > > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> > > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> > > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > > [5] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
> > > [6] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[B]
> > > [7] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
> > > [8] -1 0 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
> > > [9] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
> > > [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > > [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > > [12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
> > > [13] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
> > > [14] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
> > > [15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> > > (II) LoadModule: "GLcore"
> > > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> > > (II) Module GLcore: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > ABI class: XFree86 Server Extension, version 0.1
> > > (II) LoadModule: "bitmap"
> > > (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
> > > (II) Loading font Bitmap
> > > (II) LoadModule: "dbe"
> > > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> > > (II) Module dbe: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > Module class: XFree86 Server Extension
> > > ABI class: XFree86 Server Extension, version 0.1
> > > (II) Loading extension DOUBLE-BUFFER
> > > (II) LoadModule: "ddc"
> > > (II) Loading /usr/X11R6/lib/modules/libddc.a
> > > (II) Module ddc: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > ABI class: XFree86 Video Driver, version 0.4
> > > (II) LoadModule: "dri"
> > > (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> > > (II) Module dri: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > ABI class: XFree86 Server Extension, version 0.1
> > > (II) Loading sub module "drm"
> > > (II) LoadModule: "drm"
> > > (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> > > (II) Module drm: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > ABI class: XFree86 Server Extension, version 0.1
> > > (II) Loading extension XFree86-DRI
> > > (II) LoadModule: "extmod"
> > > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> > > (II) Module extmod: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > Module class: XFree86 Server Extension
> > > ABI class: XFree86 Server Extension, version 0.1
> > > (II) Loading extension SHAPE
> > > (II) Loading extension MIT-SUNDRY-NONSTANDARD
> > > (II) Loading extension BIG-REQUESTS
> > > (II) Loading extension SYNC
> > > (II) Loading extension MIT-SCREEN-SAVER
> > > (II) Loading extension XC-MISC
> > > (II) Loading extension XFree86-VidModeExtension
> > > (II) Loading extension XFree86-Misc
> > > (II) Loading extension XFree86-DGA
> > > (II) Loading extension DPMS
> > > (II) Loading extension FontCache
> > > (II) Loading extension TOG-CUP
> > > (II) Loading extension Extended-Visual-Information
> > > (II) Loading extension XVideo
> > > (II) Loading extension XVideo-MotionCompensation
> > > (II) LoadModule: "freetype"
> > > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> > > (II) Module freetype: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.1.9
> > > Module class: XFree86 Font Renderer
> > > ABI class: XFree86 Font Renderer, version 0.2
> > > (II) Loading font FreeType
> > > (II) LoadModule: "glx"
> > > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> > > (II) Module glx: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > ABI class: XFree86 Server Extension, version 0.1
> > > (II) Loading sub module "GLcore"
> > > (II) LoadModule: "GLcore"
> > > (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
> > > (II) Loading extension GLX
> > > (II) LoadModule: "int10"
> > > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
> > > (II) Module int10: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > ABI class: XFree86 Video Driver, version 0.4
> > > (II) LoadModule: "pex5"
> > > (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
> > > (II) Module pex5: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > Module class: XFree86 Server Extension
> > > ABI class: XFree86 Server Extension, version 0.1
> > > (II) Loading extension X3D-PEX
> > > (II) LoadModule: "record"
> > > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
> > > (II) Module record: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.13.0
> > > Module class: XFree86 Server Extension
> > > ABI class: XFree86 Server Extension, version 0.1
> > > (II) Loading extension RECORD
> > > (II) LoadModule: "speedo"
> > > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> > > (II) Module speedo: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > Module class: XFree86 Font Renderer
> > > ABI class: XFree86 Font Renderer, version 0.2
> > > (II) Loading font Speedo
> > > (II) LoadModule: "type1"
> > > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> > > (II) Module type1: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > Module class: XFree86 Font Renderer
> > > ABI class: XFree86 Font Renderer, version 0.2
> > > (II) Loading font Type1
> > > (II) Loading font CID
> > > (II) LoadModule: "vbe"
> > > (II) Loading /usr/X11R6/lib/modules/libvbe.a
> > > (II) Module vbe: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > ABI class: XFree86 Video Driver, version 0.4
> > > (II) LoadModule: "xie"
> > > (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
> > > (II) Module xie: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > Module class: XFree86 Server Extension
> > > ABI class: XFree86 Server Extension, version 0.1
> > > (II) Loading extension XIE
> > > (II) LoadModule: "r128"
> > > (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
> > > (II) Module r128: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 4.0.1
> > > Module class: XFree86 Video Driver
> > > ABI class: XFree86 Video Driver, version 0.4
> > > (II) LoadModule: "ati"
> > > (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
> > > (II) Module ati: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 6.3.6
> > > Module class: XFree86 Video Driver
> > > ABI class: XFree86 Video Driver, version 0.4
> > > (II) LoadModule: "mouse"
> > > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> > > (II) Module mouse: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 1.0.0
> > > Module class: XFree86 XInput Driver
> > > ABI class: XFree86 XInput driver, version 0.2
> > > (II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
> > > (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
> > > ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
> > > ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
> > > ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI),
> > > ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI),
> > > ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
> > > ATI Rage 128 Mobility ML (AGP)
> > > (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
> > > ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
> > > ATI Radeon VE (AGP)
> > > (II) Primary Device is: PCI 01:00:0
> > > (--) Assigning device section with no busID to primary device
> > > (--) Chipset ATI Rage 128 RF (AGP) found
> > > (II) Loading sub module "r128"
> > > (II) LoadModule: "r128"
> > > (II) Reloading /usr/X11R6/lib/modules/drivers/r128_drv.o
> > > (II) resource ranges after xf86ClaimFixedResources() call:
> > > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> > > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> > > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > > [5] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
> > > [6] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[B]
> > > [7] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
> > > [8] -1 0 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
> > > [9] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
> > > [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > > [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > > [12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
> > > [13] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
> > > [14] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
> > > [15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> > > (II) resource ranges after probing:
> > > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> > > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> > > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > > [5] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
> > > [6] -1 0 0xe2000000 - 0xe20000ff (0x100) MX[B]
> > > [7] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B]
> > > [8] -1 0 0xe1000000 - 0xe1003fff (0x4000) MX[B](B)
> > > [9] -1 0 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
> > > [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> > > [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> > > [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> > > [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > > [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > > [15] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
> > > [16] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
> > > [17] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
> > > [18] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> > > [19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> > > [20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> > > (II) Setting vga for screen 0.
> > > (II) Loading sub module "vgahw"
> > > (II) LoadModule: "vgahw"
> > > (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> > > (II) Module vgahw: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 0.1.0
> > > ABI class: XFree86 Video Driver, version 0.4
> > > (II) R128(0): PCI bus 1 card 0 func 0
> > > (**) R128(0): Depth 24, (--) framebuffer bpp 32
> > > (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
> > > (==) R128(0): Default visual is TrueColor
> > > (**) R128(0): Option "AGPMode" "2"
> > > (**) R128(0): Option "UseFBDev" "true"
> > > (==) R128(0): RGB weight 888
> > > (II) R128(0): Using 8 bits per RGB (8 bit DAC)
> > > (**) R128(0): Using framebuffer device
> > > (II) Loading sub module "fbdevhw"
> > > (II) LoadModule: "fbdevhw"
> > > (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
> > > (II) Module fbdevhw: vendor="The XFree86 Project"
> > > compiled for 4.1.0.1, module version = 0.0.2
> > > ABI class: XFree86 Video Driver, version 0.4
> > > (--) R128(0): Chipset: "ATI Rage 128 RF (AGP)" (ChipID = 0x5246)
> > > (--) R128(0): Linear framebuffer at 0xdc000000
> > > (--) R128(0): MMIO registers at 0xe1000000
> > > Symbol fbPictureInit from module
> > /usr/X11R6/lib/modules/drivers/r128_drv.o
> > > is unresolved!
> > >
> > > Fatal server error:
> > > Caught signal 11. Server aborting
> > >
> > >
> > > When reporting a problem related to a server crash, please send
> > > the full server output, not just the last messages.
> > > This can be found in the log file "/var/log/XFree86.0.log".
> > > Please report problems to submit@bugs.debian.org.
> > >
> > > #################################
> > > /etc/X11/XF86configure-4:
> > > #################################
> > > ### BEGIN DEBCONF SECTION
> > > # XF86Config-4 (XFree86 server configuration file) generated by
> > > dexconf, the
> > > # Debian X Configuration tool, using values from the debconf database.
> > > #
> > > # Edit this file with caution, and see the XF86Config-4 manual page.
> > > # (Type "man XF86Config-4" at the shell prompt.)
> > > #
> > > # If you want your changes to this file preserved by dexconf, only make
> > > changes
> > > # before the "### BEGIN DEBCONF SECTION" line above, and/or after the
> > > # "### END DEBCONF SECTION" line below.
> > > #
> > > # To change things within the debconf section, run the command:
> > > # dpkg-reconfigure xserver-xfree86
> > > # as root. Also see "How do I add custom sections to a
> > dexconf-generated
> > > # XF86Config or XF86Config-4 file?" in
> > > /usr/share/doc/xfree86-common/FAQ.gz.
> > >
> > > Section "Files"
> > > FontPath "unix/:7100" # local font server
> > > # if the local font server has problems, we can fall back on these
> > > FontPath "/usr/lib/X11/fonts/misc"
> > > FontPath "/usr/lib/X11/fonts/cyrillic"
> > > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
> > > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
> > > FontPath "/usr/lib/X11/fonts/Type1"
> > > FontPath "/usr/lib/X11/fonts/Speedo"
> > > FontPath "/usr/lib/X11/fonts/100dpi"
> > > FontPath "/usr/lib/X11/fonts/75dpi"
> > > EndSection
> > >
> > > Section "Module"
> > > Load "GLcore"
> > > Load "bitmap"
> > > Load "dbe"
> > > Load "ddc"
> > > Load "dri"
> > > Load "extmod"
> > > Load "freetype"
> > > Load "glx"
> > > Load "int10"
> > > Load "pex5"
> > > Load "record"
> > > Load "speedo"
> > > Load "type1"
> > > Load "vbe"
> > > Load "xie"
> > > EndSection
> > >
> > > Section "InputDevice"
> > > Identifier "Generic Keyboard"
> > > Driver "keyboard"
> > > Option "CoreKeyboard"
> > > Option "XkbRules" "xfree86"
> > > Option "XkbModel" "pc104"
> > > Option "XkbLayout" "de_DE"
> > > Option "XkbVariant" "de_DE"
> > > EndSection
> > >
> > > Section "InputDevice"
> > > Identifier "Configured Mouse"
> > > Driver "mouse"
> > > Option "CorePointer"
> > > Option "Device" "/dev/psaux"
> > > Option "Protocol" "PS/2"
> > > Option "Emulate3Buttons" "true"
> > > Option "ZAxisMapping" "4 5"
> > > EndSection
> > >
> > > Section "InputDevice"
> > > Identifier "Generic Mouse"
> > > Driver "mouse"
> > > Option "SendCoreEvents" "true"
> > > Option "Device" "/dev/input/mice"
> > > Option "Protocol" "ImPS/2"
> > > Option "Emulate3Buttons" "true"
> > > Option "ZAxisMapping" "4 5"
> > > EndSection
> > >
> > > Section "Device"
> > > Identifier "ATI Rage Fury"
> > > Driver "r128"
> > > Option "AGPMode" "2"
> > > Option "UseFBDev" "true"
> > > EndSection
> > >
> > > Section "Monitor"
> > > Identifier "ICL ErgoPRO VE15C"
> > > HorizSync 28-50
> > > VertRefresh 43-75
> > > Option "DPMS"
> > > EndSection
> > >
> > > Section "Screen"
> > > Identifier "Default Screen"
> > > Device "ATI Rage Fury"
> > > Monitor "ICL ErgoPRO VE15C"
> > > DefaultDepth 24
> > > SubSection "Display"
> > > Depth 1
> > > Modes "1024x768" "800x600" "640x480"
> > > EndSubSection
> > > SubSection "Display"
> > > Depth 4
> > > Modes "1024x768" "800x600" "640x480"
> > > EndSubSection
> > > SubSection "Display"
> > > Depth 8
> > > Modes "1024x768" "800x600" "640x480"
> > > EndSubSection
> > > SubSection "Display"
> > > Depth 15
> > > Modes "1024x768" "800x600" "640x480"
> > > EndSubSection
> > > SubSection "Display"
> > > Depth 16
> > > Modes "1024x768" "800x600" "640x480"
> > > EndSubSection
> > > SubSection "Display"
> > > Depth 24
> > > Modes "1024x768" "800x600" "640x480"
> > > EndSubSection
> > > EndSection
> > >
> > > Section "ServerLayout"
> > > Identifier "Default Layout"
> > > Screen "Default Screen"
> > > InputDevice "Generic Keyboard"
> > > InputDevice "Configured Mouse"
> > > InputDevice "Generic Mouse"
> > > EndSection
> > >
> > > Section "DRI"
> > > Mode 0666
> > > EndSection
> > >
> > > ### END DEBCONF SECTION
> > >
> > >
> > > --
> > > Zum AUSTRAGEN schicken Sie eine Mail an
> > > debian-user-german-request@lists.debian.org
> > > mit dem Subject "unsubscribe". Probleme? Mail an
> > > listmaster@lists.debian.org (engl)
> > >
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
camco, it department, stampfenbachstr. 48, 8006 zürich.
Tel.: +41 1 360 57 57, Fax: +41 1 360 57 59
mailto:it@camco.ch
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reply to: