Re: debian + sedlbauer + hylafax: can not receive faxes
Hallo Matthias,
faxstat -s bringt:
HylaFAX scheduler on debian.menole.home: Running
Modem ttyI0 (): Initializing server
Modem ttyS0 (): Waiting for modem to come ready
Das Modem an ttyS0 ist derzeit nicht angeschlossen.
Tschuess,
Michael
Am Die, 2002-04-30 um 16.51 schrieb Lentner Matthias:
> Hallo,
>
> - welche Meldung bekommst Du bei faxstat -s ?
> - wird das faxgetty richtig gestartet, wenn ja, stimmen die runlevels ?
>
> poste die gleiche Frage vielleicht auch einmal unter www.isdn4linux.de, kann
> sein, dass hier schon einmal jemand ähnliche Probleme hatte !
>
> mfg,
> matthias
>
> > -----Ursprüngliche Nachricht-----
> > Von: michael mende [mailto:mende.michael@gmx.net]
> > Gesendet am: Dienstag, 30. April 2002 17:05
> > An: Lentner Matthias
> > Betreff: Re: AW: debian + sedlbauer + hylafax: can not receive faxes
> >
> > Hallo Matthias,
> >
> > danke fuer die Tips, habe sie genau befolgt, die Karte ist direkt am
> > NTBA angeschlossen (schon immer), ModemResetCmds habe ich entsprechend
> > abgeandert, Hylafax neu gestartet und nichts hat sich getan:
> >
> > System-log:
> > isdn_net: Incoming call without OAD, assuming '0'
> > isdn_net: call from 0,1,0 -> 13XXXX
> > isdn_net: Service-Indicator not 7, ignored
> > isdn_tty: Incoming call without OAD, assuming '0'
> > isdn_tty: call from 0 -> 13XXXX ignored
> >
> > ISDN-log (FAX ist Alias fuer MSN):
> > Apr 30 16:43:33 * Call to tei 127 from ? on FAX RING (3.1 kHz audio)
> > Apr 30 16:44:33 Call to tei 127 from ? on FAX HANGUP (Timeout)
> > Apr 30 16:44:36 * Call to tei 71 from ? on FAX HANGUP
> >
> > Dass der isdn_net nicht rangeht, scheint mir eigentlich in Ordnung zu
> > sein, das Fax haengt ja am ttyI0. Oder unterliege ich da
> > einem schweren
> > Irrtum?
> > Kann das an den getties liegen? Hylafax fragte ja bei der Installation
> > nach diversen getty-links, die dann irgendwie hingeschummelt werden
> > mussten (was ist ein 'egetty', apt-cache search bringt kein Ergebnis):
> > /etc/hylafax/egetty-link->/sbin/mgetty
> > /etc/hylafax/getty-link->/sbin/getty
> > /etc/hylafax/vgetty-link->/user/sbin/vgetty
> > Ich frag das nur, weil es ja auch noch den faxgetty gibt.
> >
> > Apropos isdn_net, wie weit muss eigentlich das isdn-system installiert
> > sein? Wie gesagt, apt-get install isdnutils zerstoert die
> > dsl-Verbindung
> > und kann sich (daher logischerweise?) auch nicht korrekt
> > beenden. Daher
> > sind nur die isdnutils-base installiert und isdnlog.
> >
> > Ich wuensche schonmal einen kaempferischen 1.Mai,
> >
> > tschuess,
> >
> > Michael
> >
> >
> > Am Die, 2002-04-30 um 15.25 schrieb Lentner Matthias:
> > > Hallo,
> > >
> > >
> > > Probier mal folgendes:
> > >
> > > - isdn_net: Service-Indicator not 7, ignored
> > >
> > > Diese Meldung deutet normal darauf hin, dass die
> > Diensterkennung nicht
> > > funktioniert, d.h. die ISDN Karte erkennt den Anruf nicht
> > als Fax und nimmt
> > > daher den Anruf nicht an.
> > > Abhilfe könnte durch die Telefonanlage geschafft werden.
> > Entweder kann man
> > > hier Einstellungen zum durchgeschleiften S0 Bus machen.
> > Wenn nicht, sollte
> > > man die Karte direkt an den NTBA anschliessen.
> > >
> > > Als nächstes solltest du zum Test die MSN weglassen:
> > >
> > > anstatt
> > >
> > > ModemResetCmds: "AT&E13XXXXS0=1S13=1+FCLASS=1"
> > # stuff to
> > > do when
> > >
> > > sollte er das versuchen:
> > >
> > > ModemResetCmds: "AT&E0" # stuff to do when
> > >
> > > normal sollte es dann funktionieren !
> > >
> > > Grüße,
> > > Matthias
> > >
> > > > Subject: debian + sedlbauer + hylafax: can not receive faxes
> > > > From: michael mende <mende.michael@gmx.net>
> > > > To: debian-user-german@lists.debian.org,
> > debian-user@lists.debian.org
> > > > X-Mailer: Evolution/1.0.2
> > > > Date: 29 Apr 2002 15:51:30 +0200
> > > > X-Mailing-List: <debian-user-german@lists.debian.org>
> > > > archive/latest/7471
> > > >
> > > > Hello debian-users,
> > > > hallo debian-users-german,
> > > > because this is sent to both debian-user and
> > > > debian-user-german i try it in english.
> > > > German ansers are also welcome.
> > > >
> > > > i try to get a fax server running with:
> > > > debian/woody
> > > > isdn sedlbauer speedfax+ isa
> > > > hylafax.
> > > > The current state is that i can send faxes but do not receive
> > > > anything.
> > > > The kernel logs that:
> > > >
> > > > isdn_net: Incoming call without OAD, assuming '0'
> > > > isdn_net: call from 0,1,0 -> 13XXXX
> > > > isdn_net: Service-Indicator not 7, ignored
> > > > isdn_tty: Incoming call without OAD, assuming '0'
> > > > isdn_tty: call from 0 -> 13XXXX ignored
> > > >
> > > > What did I do until today:
> > > >
> > > > installed modular kernel
> > > > installed sedlbauer isdn card with isapnp and modprobe
> > > > installed isdnutils-base (full installation of isdnutils
> > cuts my dsl
> > > > connection!)
> > > > played the firmware onto the isdn card with hisaxctrl
> > > > installed hylafax-server as described by sedlbauer.de
> > (for redhat ;-))
> > > >
> > > > Here comes the /etc/hylafax/config.ttyI0:
> > > >
> > > > [...]
> > > > #
> > > > # Generic Class 1 modem configuration.
> > > > #
> > > > # EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
> > > > #
> > > > CountryCode: 49
> > > > AreaCode: 345
> > > > FAXNumber: +49.345.13XXXX
> > > > LongDistancePrefix: 0
> > > > InternationalPrefix: 00
> > > > DialStringRules: /etc/hylafax/dialrules
> > > > ServerTracing: 0xFFF # also tried 527
> > > > SessionTracing: 0xFFF # also tried 527
> > > > RecvFileMode: 0644
> > > > LogFileMode: 0640
> > > > DeviceMode: 0666
> > > > RingsBeforeAnswer: 1
> > > > SpeakerVolume: off
> > > > GettyArgs: "-r -b -s %s %l"
> > > > LocalIdentifier: faxserver@menole.net
> > > > PriorityScheduling: yes
> > > > TagLineFormat: "From %%l|%c|Page %%P of %%T"
> > > > MaxRecvPages: 25
> > > > #
> > > > #
> > > > # Modem-related stuff: should reflect modem command interface
> > > > # and hardware connection/cabling (e.g. flow control).
> > > > #
> > > > ModemType: Class1 # use this to
> > supply a hint
> > > > #ModemRate: 19200 # rate for
> > DCE-DTE communication
> > > > #ModemFlowControl: xonxoff # XON/XOFF flow
> > control assumed
> > > > #
> > > > #ModemSetupDTRCmd: AT&D2 # setup so DTR
> > drop resets modem
> > > > #ModemSetupDCDCmd: AT&C1 # setup so DCD
> > follows carrier
> > > > GettyArgs: "-h %l dx_%s" # modem must
> > > > auto-detect fax/data
> > > > #
> > > > # We normally append the "@" symbol to the dial string so that
> > > > # the modem will wait 5 seconds before attempting to connect
> > > > # and return result codes that distinguish between no carrier
> > > > # and no answer. This makes it possible to avoid problems with
> > > > # repeatedly dialing a number that doesn't have a fax machine
> > > > # (kudos to Stuart Lynne for this trick.)
> > > > #
> > > > # NB: If you need to prefix phone numbers to get through a PBX,
> > > > # put it in the ModemDialCmd; e.g. "DT9%s@".
> > > > # next line modified (uncommented)
> > > > ModemDialCmd: ATDT%s@ # T for tone dialing, @
> > > > for silence
> > > > #
> > > > # Other possible configuration stuff. The default strings are
> > > > # shown below. Only those that are different from the defaults
> > > > # need to be included in the configuration file.
> > > > # next line modified (was empty string)
> > > > ModemResetCmds: "AT&E13XXXXS0=1S13=1+FCLASS=1"
> > > > # stuff to do when
> > > > modem is reset
> > > > #ModemAnswerCmd: ATA # use this to
> > > > answer phone
> > > > #ModemNoFlowCmd: AT&K # disable flow
> > > > control cmd
> > > > #ModemHardFlowCmd: AT&K3 # hardware flow
> > control cmd
> > > > #ModemSoftFlowCmd: AT&K4 # software flow
> > control cmd
> > > > #ModemNoAutoAnswerCmd: ATS0=0 # disable auto-answer
> > > > #
> > > > # Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
> > > > # Note that we both turn the speaker on/off and set volume.
> > > > #
> > > > #ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
> > > > #ModemEchoOffCmd: ATE0 # disable command echo
> > > > #ModemVerboseResultsCmd: ATV1 # enable
> > > > verbose command results
> > > > #ModemResultCodesCmd: ATQ0 # enable result codes
> > > > #ModemOnHookCmd: ATH0 # place phone
> > > > on hook (hangup)
> > > > #ModemSoftResetCmd: ATZ # do soft reset of modem
> > > > #ModemSoftResetCmdDelay: 3000 # pause after soft reset
> > > > #ModemWaitTimeCmd: ATS7=60 # wait 60
> > seconds for carrier
> > > > #ModemCommaPauseTimeCmd: ATS8=2 # comma pause
> > > > time is 2 seconds
> > > > #ModemRecvFillOrder: LSB2MSB # bit order of received
> > > > facsimile
> > > > #ModemSendFillOrder: LSB2MSB # bit order modem
> > > > expects for transmit
> > > > #
> > > > Class1Cmd: AT+FCLASS=1 # command to
> > enter class 1
> > > > Class1PPMWaitCmd: AT+FTS=7 # command to stop and
> > > > wait before PPM
> > > > Class1TCFWaitCmd: AT+FTS=7 # command to stop and
> > > > wait before TCF
> > > > Class1EOPWaitCmd: AT+FTS=9 # command to stop and
> > > > wait before EOP
> > > > Class1TCFResponseDelay: 75 # 75ms delay
> > > > between recv TCF & response
> > > > Class1SendMsgDelay: 75 # 75ms delay
> > after training
> > > > Class1SwitchingDelay: 75 # 150ms delay in
> > > > switching transmission
> > > > direction
> > > > Class1TrainingRecovery: 1500 # 1.5sec delay
> > > > after training failure
> > > > Class1RecvAbortOK: 200 # wait 200ms
> > for abort response
> > > > Class1FrameOverhead: 4 # 4 byte overhead in
> > > > recvd HDLC frames
> > > > Class1RecvIdentTimer: 40000 # 35+5secs waiting for
> > > > ident frames
> > > > Class1TCFMaxNonZero: 10 # max 10% of data may
> > > > be non-zero
> > > > Class1TCFMinRun: 1000 # min run is 2/3rds of
> > > > TCF duration
> > > >
> > > > Because I read anything about needing an isdn config file
> > > > callerid.conf
> > > > I installed isdnlog and built that callerid.conf:
> > > >
> > > > [...]
> > > > [MSN]
> > > > NUMBER = 13XXXX
> > > > ALIAS = FAX
> > > > SI = 1 # also tried 7
> > > > #ZONE = 1
> > > > #START = {
> > > > # [FLAG]
> > > > # FLAGS = I|O|R|C|B|A|E|H
> > > > # PROGRAM = /bin/myprog \$1 \$2 \$3 Phone
> > > > #}
> > > > [...]
> > > >
> > > > Now I do not know what else to do. I succeeded sending faxes to an
> > > > online fax service (web.de) but receiving faxes from there failed.
> > > >
> > > > Oh, I have forgotten to show my /etc/inittab:
> > > > [...]
> > > > # hylafax auf isdn:
> > > > I0:345:respawn:/usr/sbin/faxgetty /dev/ttyI0
> > > > [...]
> > > >
> > > > If there is anybody who is successfull running a
> > > > debian/sedlbauer/hylafax, please help!
> > > >
> > > > I thank you for spending your time,
> > > > with best regards
> > > >
> > > > --
> > > > Mit freundlichen Gruessen
> > > >
> > > > Michael Mende
> > > > __________________________________________________
> > > >
> > > > Elsa- Braendstroem- Strasse 82
> > > > D-06130 Halle
> > > >
> > > > WWW: http://www.menole.net
> > > > E-Mail: mail@menole.net
> > > > __________________________________________________
> > > >
> > >
> >
> >
>
--
Mit freundlichen Gruessen
Michael Mende
__________________________________________________
Elsa- Braendstroem- Strasse 82
D-06130 Halle
WWW: http://www.menole.net
E-Mail: mail@menole.net
Fax: +49 (345) 1319020
Tel.: +49 (345) 1319019
__________________________________________________
--
Zum AUSTRAGEN schicken Sie eine Mail an debian-user-german-request@lists.debian.org
mit dem Subject "unsubscribe". Probleme? Mail an listmaster@lists.debian.org (engl)
Reply to: