dma setzen schlägt fehl
Hallo,
ich versuche gerade, nach
"http://channel.debian.de/faq/DebianDE-10.html"; using_dma zu setzen.
~ $ hdparm -i /dev/hdc
/dev/hdc:
Model=Maxtor 96147H6, FwRev=ZAH814Y0, SerialNo=V6030JHC
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=120064896
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive Supports : ATA/ATAPI-6 T13 1410D revision 0 : ATA-1
ATA-2 ATA-3 ATA-4 ATA-5 ATA-6
*udma2, also alle Partitionen umount und
# hdparm -k1 -c1 -m16 -d1 -u1 -X66 -S0 /dev/hdc
/dev/hdc:
setting 32-bit I/O support flag to 1
setting multcount to 16
setting unmaskirq to 1 (on)
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
setting keep_settings to 1 (on)
setting xfermode to 66 (UltraDMA mode2)
setting standby to 0 (off)
multcount = 16 (on)
I/O support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 0 (off)
keepsettings = 1 (on)
Das Kommando -d1 schlägt fehl. Mit hda (/dev/hda: Model=Maxtor 4D080H4, FwRev=DAH017K0, SerialNo=D4086JJE) dasselbe.
Was mache ich falsch?
Gruß
Uli
--
'The box said, 'Requires Windows 95 or better', so i installed Linux - TKK 5
--
Zum AUSTRAGEN schicken Sie eine Mail an debian-user-german-request@lists.debian.org
mit dem Subject "unsubscribe". Probleme? Mail an listmaster@lists.debian.org (engl)
Reply to: