[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Nouvelle install de debian 13 ne boot pas



Bonjour,

J'ai fraichement installé une debian 13 avec la root, swap et home chiffrée.

J'ai cru comprendre que l'installation demande une /boot(non chiffrée) séparée pour initialiser le système et déchiffrer la root.

Alors que j'ai aussi cru comprendre qu'avec GUB2 + LUKS2 il n'y a pas besoin d'un /boot en clair(non chiffrée)

Du coup, j'ai fait une partition /boot séparée(non chiffrée), mais ça ne boot pas. :-(


-----------------------------------------------------------------
Could not retrieve perf counters (-19)
i8042: PNP: PS/2 appearts to have AUX port disabled, if this is incorect please boot with i8042.nopnp amdgpu 0000:04:00:0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x4) amdgpu 0000:04:00:0: amdgpu: psp gfx command INVOKE_CMD(0x3) failed and response status is (0x4)
amdgpu 0000:04:00:0:  amdgpu: Secure display: Generic Failure.
amdgpu 0000:04:00:0: amdgpu: SECURISEDISPLAY: query securedisplay TA failed. ret 0x0 device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is display. Duplicate IMA mesurements will not be recorded in the IMA log.

Pleace unlock disk nvme0n13_crypt:clocksource: timekeeping watchdog on CPU3: Marking clocksource 'tsc' as unstable beacause the skew is too large: ksource: 'hpet' wd_nsec: 512376153 wd_now: 5412cbe wd_last: 4d13b58 mask: fffffff ksource: 'tsc' cs_nsec: 513260027 cs_now: b730E4ACB cs_last: b32ee77f2 mask: fffffffffffff
ksource:		Clo
ksource:		'tsc' is current clocksource.
found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
Pleace unlock disk nvme0n13_crypt:_
-----------------------------------------------------------------


J'obtiens quand même l'invite à taper la passe phrase, ce qui "ouvre" /root, mais pas /home

 free indique qu'il y a bien le swap.

Déchiffrer et monter les partitions avec une live, se passe sans problème.

J'ai fait un partitionnement manuel, car, je ne sais pas si l'installateur gère un dual boot avec windows en choisissant "guidé disque entier".



Belle journée...

--
Benoît


Reply to: