Re: carte reseau en panne

[hamster <hamster@suna.fdn.fr>]

Le 05/12/2019 à 16:21, Frédéric MASSOT a écrit :
> Et que donne :
>
> $ sudo ethtool eth0

~# ethtool eth0
Settings for eth0:
    Supported ports: [ MII ]
    Supported link modes:   10baseT/Half 10baseT/Full
                            100baseT/Half 100baseT/Full
    Supported pause frame use: No
    Supports auto-negotiation: Yes
    Supported FEC modes: Not reported
    Advertised link modes:  10baseT/Half 10baseT/Full
                            100baseT/Half 100baseT/Full
    Advertised pause frame use: Symmetric Receive-only
    Advertised auto-negotiation: Yes
    Advertised FEC modes: Not reported
    Speed: 100Mb/s
    Duplex: Full
    Port: Twisted Pair
    PHYAD: 1
    Transceiver: internal
    Auto-negotiation: on
    MDI-X: Unknown
    Supports Wake-on: g
    Wake-on: d
    Current message level: 0x000000ff (255)
                   drv probe link timer ifdown ifup rx_err tx_err
    Link detected: yes

J'ai aussi lancé dhclient, le curseur va a la ligne, ne rend pas le
promt et il ne se passe rien pendant longtemps, jusqu'a ce qu'on
l'arrete avec control C.