Re: Mauvaise résolution d'écran suite à changement d'écran
Le samedi 24 décembre 2016 à 12:35 +0100, Frédéric MASSOT a écrit :
> Utilises sudo pour lancer cette commande.
~$ sudo get-edid 2>&1 | parse-edid
parse-edid: parse-edid version 2.0.0
[sudo] password for nicolas:
parse-edid: EDID checksum failed - data is corrupt. Continuing anyway.
parse-edid: first bytes don't match EDID version 1 header
parse-edid: do not trust output (if any).
# EDID version 32 revision 118
Section "Monitor"
Identifier "NQ@:6765"
VendorName "NQ@"
ModelName "NQ@:6765"
# DPMS capabilities: Active off:yes Suspend:yes Standby:no
Mode "1110x1568" # vfreq 17.559Hz, hfreq 33.766kHz
DotClock 82.930000
HTimings 1110 1218 1326 2456
VTimings 1568 1600 1626 1923
EndMode
Mode "884x888" # vfreq 335.422Hz, hfreq 314.290kHz
DotClock 287.890000
HTimings 884 916 1029 916
VTimings 888 943 967 937
EndMode
Mode "888x632" # vfreq 389.264Hz, hfreq 264.700kHz
DotClock 251.200000
HTimings 888 987 1107 949
VTimings 632 635 648 680
EndMode
Mode "1652x1902" # vfreq 16.831Hz, hfreq 45.478kHz
DotClock 254.540000
HTimings 1652 1769 1881 5597
VTimings 1902 1957 2005 2702
EndMode
EndSection
Reply to: