Re: Kernel & SSD, laptop & hyperviseur
Bonjour a tous,
pour etre plus complet voici l'output de smartmontools. Je pense que
l'on peut s'accorder sur le fait qu'il commence a fatiguer ....
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.25-1-lts] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 840 Series
Serial Number: S14LNEACC47702K
LU WWN Device Id: 5 002538 55013a92e
Firmware Version: DXT06B0Q
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Oct 21 08:42:27 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (53956) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 70) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0
9 Power_On_Hours 0x0032 098 098 000 Old_age
Always - 8937
12 Power_Cycle_Count 0x0032 095 095 000 Old_age
Always - 4171
177 Wear_Leveling_Count 0x0013 095 095 000 Pre-fail
Always - 49
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail
Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age
Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age
Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail
Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0032 073 047 000 Old_age
Always - 27
195 ECC_Error_Rate 0x001a 200 200 000 Old_age
Always - 0
199 CRC_Error_Count 0x003e 099 099 000 Old_age
Always - 1
235 POR_Recovery_Count 0x0012 099 099 000 Old_age
Always - 173
241 Total_LBAs_Written 0x0032 099 099 000 Old_age
Always - 35850313295
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Offline Completed without error 00% 2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: