Wheezy : echec de montage automatique d'une clé USB formatée en fat16
Bonjour,
Suite à une réinstallation de wheezy, ma machine n'est plus capable de
monter en automatique une clé au format vfat ou fat16.
Sur une autre machine, j'ai vérifié que la clé est bien "montable". Et
sur cette machine je peux monter une clé avec une partition LUKS puis
ext3.
Je ne trouve pas la faille de mon installation, car je pense qu'il doit
manquer quelques paquets ou configuration...
Ci-joint vous trouverez la trace dans "messages" de la détection et de
la tentative de montage de la clé USB.
Ci-après le message de gnome suite à l'insertion de la clé
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdg1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Enfin le fdisk de la clé
yann@yan:~$ sudo fdisk -l /dev/sdg
Disk /dev/sdg: 1039 MB, 1039663104 bytes
256 heads, 32 sectors/track, 247 cylinders
Units = cylinders of 8192 * 512 = 4194304 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc3072e18
Device Boot Start End Blocks Id System
/dev/sdg1 1 248 1015280 4 FAT16 <32M
Partition 1 has different physical/logical endings:
phys=(249, 255, 32) logical=(247, 223, 32)
Cordialement.
--
Yann
May 15 11:44:22 yan kernel: [ 145.592023] usb 1-6: new high speed USB device using ehci_hcd and address 5
May 15 11:44:23 yan kernel: [ 145.727622] usb 1-6: New USB device found, idVendor=090c, idProduct=1000
May 15 11:44:23 yan kernel: [ 145.727628] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 15 11:44:23 yan kernel: [ 145.727633] usb 1-6: Product: USB DISK
May 15 11:44:23 yan kernel: [ 145.727636] usb 1-6: Manufacturer: SMI Corporation
May 15 11:44:23 yan kernel: [ 145.727639] usb 1-6: SerialNumber: AA04012702038
May 15 11:44:23 yan kernel: [ 145.800071] usbcore: registered new interface driver uas
May 15 11:44:23 yan kernel: [ 145.829382] Initializing USB Mass Storage driver...
May 15 11:44:23 yan kernel: [ 145.829604] scsi6 : usb-storage 1-6:1.0
May 15 11:44:23 yan kernel: [ 145.829904] usbcore: registered new interface driver usb-storage
May 15 11:44:23 yan kernel: [ 145.829908] USB Mass Storage support registered.
May 15 11:44:24 yan kernel: [ 146.829253] scsi 6:0:0:0: Direct-Access USB Flash Disk 3000 PQ: 0 ANSI: 0 CCS
May 15 11:44:24 yan kernel: [ 146.830229] sd 6:0:0:0: Attached scsi generic sg7 type 0
May 15 11:44:24 yan kernel: [ 146.831981] sd 6:0:0:0: [sdg] 2030592 512-byte logical blocks: (1.03 GB/991 MiB)
May 15 11:44:24 yan kernel: [ 146.832821] sd 6:0:0:0: [sdg] Write Protect is off
May 15 11:44:24 yan kernel: [ 146.884113] sdg: sdg1
May 15 11:44:24 yan kernel: [ 146.887354] sd 6:0:0:0: [sdg] Attached SCSI removable disk
May 15 11:44:24 yan kernel: [ 147.400392] UDF-fs: No VRS found
May 15 11:44:24 yan kernel: [ 147.400396] UDF-fs: Rescanning with blocksize 2048
May 15 11:44:24 yan kernel: [ 147.417639] UDF-fs: No VRS found
May 15 11:44:24 yan kernel: [ 147.417642] UDF-fs: No partition found (1)
May 15 11:44:24 yan kernel: [ 147.483130] ISOFS: Unable to identify CD-ROM format.
Reply to: