Monter un volume HSF+ en lecture/écriture
Bonjour,
Je viens de rencontrer un soucis avec un volume mac (sic !).
En branchant le disque, il est reconnu automatiquement mais en lecture
seule !
le dmesg kivabien :
usb 2-1.5: USB disconnect, address 4
[28356.502034] usb 2-1.1: new high speed USB device using ehci_hcd and
address 5
[28356.594985] usb 2-1.1: New USB device found, idVendor=1058,
idProduct=0704
[28356.594990] usb 2-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[28356.594994] usb 2-1.1: Product: External HDD
[28356.594997] usb 2-1.1: Manufacturer: Western Digital
[28356.595000] usb 2-1.1: SerialNumber: 57442D57584E333039554338323139
[28356.603073] scsi8 : usb-storage 2-1.1:1.0
[28357.600795] scsi 8:0:0:0: Direct-Access WD 5000BMV External
1.75 PQ: 0 ANSI: 4
[28357.601506] sd 8:0:0:0: Attached scsi generic sg2 type 0
[28357.602772] sd 8:0:0:0: [sdb] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[28357.603266] sd 8:0:0:0: [sdb] Write Protect is off
[28357.603273] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
[28357.603278] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[28357.604639] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[28357.604648] sdb: sdb1 sdb2
[28357.677640] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[28357.677648] sd 8:0:0:0: [sdb] Attached SCSI disk
[28362.755115] hfs: write access to a journaled filesystem is not
supported, use the force option at your own risk, mounting read-only.
J'ai essayé de le monter en rw, mais cela m'a monté une partition vide
(je ne vois plus le contenu de la partition) !
Y'a-t-il une possibilité d'écrire sur des volumes HSF ?
++
Mourad
Reply to: