Re: Mauvaise performance de disque dur sur un portable
Le 31/03/2010 10:56, Anthony Bourguignon a écrit :
smartctl -d ata -a /dev/sda
Arf, y'a du monde, mais AMHA, rien ne semble aberrant !
# smartctl -d ata -a /dev/sda
smartctl 5.40 2010-02-03 r3060 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK1032GSX
Serial Number: 968G2269S
Firmware Version: AS021G
User Capacity: 100 030 242 816 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Mar 31 11:04:21 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 384) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon
new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 76) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail
Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail
Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail
Always - 1918
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 12352
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail
Offline - 0
9 Power_On_Hours 0x0032 087 087 000 Old_age
Always - 5354
10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 1445
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 31
193 Load_Cycle_Count 0x0032 086 086 000 Old_age
Always - 140286
194 Temperature_Celsius 0x0022 100 100 000 Old_age
Always - 37 (Lifetime Min/Max 12/50)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age
Always - 167
222 Loaded_Hours 0x0032 089 089 000 Old_age
Always - 4679
223 Load_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age
Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age
Always - 315
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: