nvidia multicard, SLI et EDID
Bonjour,
Premièrement merci à ceux qui m'ont répondu j'ai réussi à arranger
quelque problème je crois.
J'ai l'impression que ça s'est améliorer, maintenant quand je fais
startx l'écran reste noir mais ne s'éteint pas comme au début. Donc je
crois que ça commence à s'améliorer. Je comprend un peux mieux mon
matériel donc voici un petit résumé:
Mon ordinateur portable contient deux carte graphique
Nvidia Geforce 9400 PCI:04:00:0
Nvidia Geforce gtx 260m PCI:02:00:0 (Ma carte principale, l'autre me
sert seulement sur batterie)
Bon j'ai activer le support multicard dans mon xorg.conf ainsi que SLI.
Dans mon Xorg.0.log ça me dit que SLI n'as pas pu se configurer et que
le serveur x ne trouve pas le EDID de mon écran.
Voici les lignes d'erreurs et les warning du Xorg.0.log: (Je met le
reste avec mon xorg.conf en pièce jointe)
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or
'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(EE) Jan 23 15:22:04 NVIDIA(0): Failed to find a valid SLI configuration.
(EE) Jan 23 15:22:04 NVIDIA(0): Invalid SLI configuration 1 of 1:
(EE) Jan 23 15:22:04 NVIDIA(0): GPUs:
(EE) Jan 23 15:22:04 NVIDIA(0): 1) NVIDIA GPU at PCI:2:0:0
(EE) Jan 23 15:22:04 NVIDIA(0): 2) NVIDIA GPU at PCI:4:0:0
(EE) Jan 23 15:22:04 NVIDIA(0): Errors:
(EE) Jan 23 15:22:04 NVIDIA(0): - Unsupported GPU
(EE) Jan 23 15:22:04 NVIDIA(0): - GPU architectures do not match
(EE) Jan 23 15:22:04 NVIDIA(0): - GPU implementations do not match
(EE) Jan 23 15:22:04 NVIDIA(0): - GPU PCI IDs do not match
(EE) Jan 23 15:22:04 NVIDIA(0): - GPU video memory sizes do not match
(WW) Jan 23 15:22:04 NVIDIA(0): Failed to find a valid SLI configuration
for the NVIDIA
(WW) Jan 23 15:22:04 NVIDIA(0): graphics device PCI:2:0:0. Please
see Chapter 25:
(WW) Jan 23 15:22:04 NVIDIA(0): Configuring SLI and Multi-GPU
FrameRendering in the README
(WW) Jan 23 15:22:04 NVIDIA(0): for troubleshooting suggestions.
(EE) Jan 23 15:22:04 NVIDIA(0): Only one GPU will be used for this X screen.
(II) Jan 23 15:22:04 NVIDIA(GPU-0): No display devices connected;
falling back to: CRT-0
(WW) Jan 23 15:22:04 NVIDIA(GPU-0): Unable to read EDID for display
device CRT-0
(WW) Jan 23 15:22:04 NVIDIA(0): Unable to get display device CRT-0's
EDID; cannot compute DPI
(WW) Jan 23 15:22:04 NVIDIA(0): from CRT-0's EDID.
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
Merci pour tout
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.4-dsa-amd64 x86_64 Debian
Current Operating System: Linux debian 2.6.30-2-amd64 #1 SMP Fri Sep 25 22:16:56 UTC 2009 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-2-amd64 root=UUID=345287c8-16e1-4ade-bd0b-38617eb53fc3 ro single
Build Date: 20 January 2010 11:36:07PM
xorg-server 2:1.7.4-2 (buildd@brahms.debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 23 15:22:01 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7c1600
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 2
(--) PCI: (0:0:3:5) 10de:0aa3:10de:cb79 nVidia Corporation MCP79 Co-processor rev 177, Mem @ 0xf0600000/524288
(--) PCI: (0:2:0:0) 10de:0618:1028:02a1 nVidia Corporation GT200 [GeForce GTX 260M] rev 162, Mem @ 0xae000000/16777216, 0xd0000000/268435456, 0xac000000/33554432, I/O @ 0x00004000/128
(--) PCI:*(0:4:0:0) 10de:0862:1028:02a1 nVidia Corporation C79 [GeForce 9400M G] rev 177, Mem @ 0xaa000000/16777216, 0xb0000000/268435456, 0xcc000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.42 Tue Oct 20 21:19:30 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 190.42 Tue Oct 20 20:42:04 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 04@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "SLI" "on"
(**) NVIDIA(0): Option "MultiGPU" "on"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) Jan 23 15:22:02 NVIDIA(0): Enabling RENDER acceleration
(**) Jan 23 15:22:02 NVIDIA(0): NVIDIA SLI auto-select rendering option.
(**) Jan 23 15:22:02 NVIDIA(0): NVIDIA Multi-GPU auto-select rendering option.
(II) Jan 23 15:22:02 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Jan 23 15:22:02 NVIDIA(0): enabled.
(EE) Jan 23 15:22:04 NVIDIA(0): Failed to find a valid SLI configuration.
(EE) Jan 23 15:22:04 NVIDIA(0): Invalid SLI configuration 1 of 1:
(EE) Jan 23 15:22:04 NVIDIA(0): GPUs:
(EE) Jan 23 15:22:04 NVIDIA(0): 1) NVIDIA GPU at PCI:2:0:0
(EE) Jan 23 15:22:04 NVIDIA(0): 2) NVIDIA GPU at PCI:4:0:0
(EE) Jan 23 15:22:04 NVIDIA(0): Errors:
(EE) Jan 23 15:22:04 NVIDIA(0): - Unsupported GPU
(EE) Jan 23 15:22:04 NVIDIA(0): - GPU architectures do not match
(EE) Jan 23 15:22:04 NVIDIA(0): - GPU implementations do not match
(EE) Jan 23 15:22:04 NVIDIA(0): - GPU PCI IDs do not match
(EE) Jan 23 15:22:04 NVIDIA(0): - GPU video memory sizes do not match
(WW) Jan 23 15:22:04 NVIDIA(0): Failed to find a valid SLI configuration for the NVIDIA
(WW) Jan 23 15:22:04 NVIDIA(0): graphics device PCI:2:0:0. Please see Chapter 25:
(WW) Jan 23 15:22:04 NVIDIA(0): Configuring SLI and Multi-GPU FrameRendering in the README
(WW) Jan 23 15:22:04 NVIDIA(0): for troubleshooting suggestions.
(EE) Jan 23 15:22:04 NVIDIA(0): Only one GPU will be used for this X screen.
(II) Jan 23 15:22:04 NVIDIA(GPU-0): No display devices connected; falling back to: CRT-0
(WW) Jan 23 15:22:04 NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
(II) Jan 23 15:22:04 NVIDIA(0): NVIDIA GPU GeForce GTX 260M (G92) at PCI:2:0:0 (GPU-0)
(--) Jan 23 15:22:04 NVIDIA(0): Memory: 1048576 kBytes
(--) Jan 23 15:22:04 NVIDIA(0): VideoBIOS: 62.92.96.00.0a
(II) Jan 23 15:22:04 NVIDIA(0): Detected PCI Express Link width: 8X
(--) Jan 23 15:22:04 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Jan 23 15:22:04 NVIDIA(0): Connected display device(s) on GeForce GTX 260M at PCI:2:0:0:
(--) Jan 23 15:22:04 NVIDIA(0): CRT-0
(--) Jan 23 15:22:04 NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(II) Jan 23 15:22:04 NVIDIA(0): Assigned Display Device: CRT-0
(==) Jan 23 15:22:04 NVIDIA(0):
(==) Jan 23 15:22:04 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) Jan 23 15:22:04 NVIDIA(0): will be used as the requested mode.
(==) Jan 23 15:22:04 NVIDIA(0):
(II) Jan 23 15:22:04 NVIDIA(0): Validated modes:
(II) Jan 23 15:22:04 NVIDIA(0): "nvidia-auto-select"
(II) Jan 23 15:22:04 NVIDIA(0): Virtual screen size determined to be 1024 x 768
(WW) Jan 23 15:22:04 NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) Jan 23 15:22:04 NVIDIA(0): from CRT-0's EDID.
(==) Jan 23 15:22:04 NVIDIA(0): DPI set to (75, 75); computed from built-in default
(**) Jan 23 15:22:04 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Jan 23 15:22:04 NVIDIA(GPU-1): NVIDIA GPU GeForce 9400 (C79) at PCI:4:0:0 (GPU-1)
(--) Jan 23 15:22:04 NVIDIA(GPU-1): Memory: 524288 kBytes
(--) Jan 23 15:22:04 NVIDIA(GPU-1): VideoBIOS: 62.79.60.00.03
(--) Jan 23 15:22:04 NVIDIA(GPU-1): Interlaced video modes are supported on this GPU
(--) Jan 23 15:22:04 NVIDIA(GPU-1): Connected display device(s) on GeForce 9400 at PCI:4:0:0:
(II) Jan 23 15:22:04 NVIDIA(0): Initialized GPU GART.
(II) Jan 23 15:22:04 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Jan 23 15:22:04 NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) Jan 23 15:22:04 NVIDIA(0): configuration option may not be set correctly. When the
(II) Jan 23 15:22:04 NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) Jan 23 15:22:04 NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) Jan 23 15:22:04 NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) Jan 23 15:22:04 NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) Jan 23 15:22:04 NVIDIA(0): Config Options in the README.
(II) Jan 23 15:22:04 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) Jan 23 15:22:04 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Jan 23 15:22:04 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) config/udev: Adding input device "Power Button" (/dev/input/event2)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event2"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "multix"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Power Button" (/dev/input/event3)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event3"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "multix"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event5)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event5"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "multix"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 413c:8157" (/dev/input/event8)
(**) "HID 413c:8157": always reports core events
(**) "HID 413c:8157": Device: "/dev/input/event8"
(II) "HID 413c:8157": Found keys
(II) "HID 413c:8157": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 413c:8157"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "multix"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Logitech USB Receiver" (/dev/input/event7)
(**) "Logitech USB Receiver": always reports core events
(**) "Logitech USB Receiver": Device: "/dev/input/event7"
(II) "Logitech USB Receiver": Found 12 mouse buttons
(II) "Logitech USB Receiver": Found scroll wheel(s)
(II) "Logitech USB Receiver": Found relative axes
(II) "Logitech USB Receiver": Found x and y relative axes
(II) "Logitech USB Receiver": Configuring as mouse
(**) "Logitech USB Receiver": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Receiver": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Receiver"" (type: MOUSE)
(**) "Logitech USB Receiver": (accel) keeping acceleration scheme 1
(**) "Logitech USB Receiver": (accel) acceleration profile 0
(II) "Logitech USB Receiver": initialized for relative axes.
(II) config/udev: Adding input device "Logitech USB Receiver" (/dev/input/mouse1)
(**) "Logitech USB Receiver": always reports core events
(**) "Logitech USB Receiver": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Receiver""
(II) config/udev: Adding input device "Laptop_Integrated_Webcam_2M" (/dev/input/event10)
(**) "Laptop_Integrated_Webcam_2M": always reports core events
(**) "Laptop_Integrated_Webcam_2M": Device: "/dev/input/event10"
(II) "Laptop_Integrated_Webcam_2M": Found keys
(II) "Laptop_Integrated_Webcam_2M": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Laptop_Integrated_Webcam_2M"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "multix"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event1)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event1"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "multix"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/event9)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event9"
(II) "SynPS/2 Synaptics TouchPad": x-axis range 1472 - 5472
(II) "SynPS/2 Synaptics TouchPad": y-axis range 1408 - 4448
(II) "SynPS/2 Synaptics TouchPad": pressure range 0 - 255
(II) "SynPS/2 Synaptics TouchPad": finger width range 0 - 0
(II) "SynPS/2 Synaptics TouchPad": buttons: left right middle
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(II) XINPUT: Adding extended input device ""SynPS/2 Synaptics TouchPad"" (type: TOUCHPAD)
(**) "SynPS/2 Synaptics TouchPad": (accel) keeping acceleration scheme 1
(**) "SynPS/2 Synaptics TouchPad": (accel) acceleration profile 0
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/mouse2)
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(**) "SynPS/2 Synaptics TouchPad": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""SynPS/2 Synaptics TouchPad""
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/event0"
(II) "Macintosh mouse button emulation": Found 3 mouse buttons
(II) "Macintosh mouse button emulation": Found relative axes
(II) "Macintosh mouse button emulation": Found x and y relative axes
(II) "Macintosh mouse button emulation": Configuring as mouse
(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
(**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE)
(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
(II) "Macintosh mouse button emulation": initialized for relative axes.
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
(II) "Macintosh mouse button emulation": Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) "AT Translated Set 2 keyboard": Close
(II) UnloadModule: "evdev"
(II) "Laptop_Integrated_Webcam_2M": Close
(II) UnloadModule: "evdev"
(II) "Logitech USB Receiver": Close
(II) UnloadModule: "evdev"
(II) "HID 413c:8157": Close
(II) UnloadModule: "evdev"
(II) "Sleep Button": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Close
(II) UnloadModule: "evdev"
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Mon Mar 23 15:33:27 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "vbe"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbLayout" "ca"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0 # <--- DEPEND DE VOTRE ECRAN
VertRefresh 43.0 - 72.0 # <--- DEPEND DE VOTRE ECRAN
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "AddARGBGLXVisuals" "True"
BusID "PCI:07:00:0" # <--- A MODIFIER
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "AddARGBGLXVisuals" "True"
BusID "PCI:06:00:0" # <--- A MODIFIER
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth "24"
Option "AddARGBGLXVisuals" "True"
Option "MultiGPU" "on"
Option "SLI" "on"
SubSection "Display"
Depth "24"
Viewport 0 0
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Reply to: