Re: NVIDIA Geforce GTX 260M - Écran Noir
Le 22-01-10 04:08, Keven Chaussé a écrit :
Bonjour,
Je crée un nouveau fil comme on me l'as suggéré. Donc voilà j'avais ce
problème :
----------------------------------------------------------------------------------
Voilà deux jours que j'essaie de résoudre ce problème. J'ai chercher
partout j'ai tout essayer mais je n'arrive pas à installer les pilotes
pour gérer l'accélération 3D de ma carte NVIDIA GeForce GTX 260M. J'ai
essayé d'installer le pilotes nvidia non-free fournit dans les dépot
de Debian cependant je crois qu'il ne gère pas ma carte graphique car
elle est vraiment récente. J'ai essayer d'installer le driver officiel
de nvidia cependant cela me fait un écran noir lorsque j'ouvre
l'ordinateur et c'est impossible de faire quoi que ce soit sauf ouvrir
ma session en single-user pour avoir la console. Je sais que dans la
version Sid de Debian il y a les drivers les plus récent pour une
carte nvidia. J'ai essayé de me procurer les version de driver récente
de celle-ci en accèdant au dépot de sid cependant cela me donne des
erreurs comme quoi ma version du module nvidia dans le kernel (192)
n'est pas compatible avec le driver nvidia 173. Ont dirait que le
driver n'existe pas sur Sid. Bref je ne sais plus quoi faire!!!
------------------------------------------------------------------------------------------
Donc après ce qu'on m'avais dit j'ai fait tout ce qui était nécessaire
pour avoir mon module nvidia 192 installé dans mon noyau. Ensuite j'ai
installer le driver nvidia 192. J'ai suivis à la lettre les étapes du
wiki de debian. Tout s'est bien installé, il n'y a eu aucune erreur
pendant l'installation. Je redémarre l'ordinateur et tout se passe
normalement Debian s'initialise et lorsqu'il arrive à l'étape du
démarrage de gdm l'écran devient noir. Pas seulement noir, l'écran
s'éteint carrément. Cependant l'ordinateur ne s'éteint pas.
Ctrl-Backpace inutile, je ne peux plus rien faire. Donc je doit
arrêter l'ordinateur brutalement avec mon bouton d'arrêt
Je précise que je suis sur un laptop donc quand l'écran s'éteint
completement je ne crois pas que ce soit bon signe.
Bref je ne vois vraiment pas ce que je peux faire de plus. D'ou vient
le problème? Je précise que j'ai utilisé nvidia-xconfig pour généré
mon fichier de configuration du serveur X. Je suis sur Sid. Je me suis
dit qu'en allant à la version la plus récente qui soit ma carte
graphique serait peut-être supporté mais rien n'y fait!
Merci à l'avance pour vos réponse !
Bon j'ai essayé toutes les étapes du troubleshoothing du wiki sans
succès aussi. J'ai été me procuré le fichier Xorg.0.log que je met en
pièce jointe. Puis finalement si j'appuis normalement sur mon bouton
d'alimentation l'ordinateur s'éteint comme il faut. Je me demande donc
si le problème ce ne serait pas plutot que c'est mon écran qui ne soit
pas détecté? Pourtant si j'installe la version de base avec l'interface
graphique ça fonctionne. Là où ça ne marche pas c'est quand je veux un
driver qui prend en charge l'accélération 3d de ma carte.
Merci
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.4-dsa-amd64 x86_64 Debian
Current Operating System: Linux debian 2.6.30-2-amd64 #1 SMP Fri Sep 25 22:16:56 UTC 2009 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-2-amd64 root=UUID=345287c8-16e1-4ade-bd0b-38617eb53fc3 ro quiet
Build Date: 20 January 2010 11:36:07PM
xorg-server 2:1.7.4-2 (buildd@brahms.debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 22 04:36:26 2010
(==) Using config file: "/etc/X11/xorg.conf"
Parse error on line 12 of section Files in file /etc/X11/xorg.conf
Ignoring obsolete keyword "RgbPath".
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x7c1600
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI: (0:0:3:5) 10de:0aa3:10de:cb79 nVidia Corporation MCP79 Co-processor rev 177, Mem @ 0xf0600000/524288
(--) PCI: (0:2:0:0) 10de:0618:1028:02a1 nVidia Corporation GT200 [GeForce GTX 260M] rev 162, Mem @ 0xae000000/16777216, 0xd0000000/268435456, 0xac000000/33554432, I/O @ 0x00004000/128
(--) PCI:*(0:4:0:0) 10de:0862:1028:02a1 nVidia Corporation C79 [GeForce 9400M G] rev 177, Mem @ 0xaa000000/16777216, 0xb0000000/268435456, 0xcc000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.42 Tue Oct 20 21:19:30 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 190.42 Tue Oct 20 20:42:04 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 04@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) Jan 22 04:36:28 NVIDIA(0): Enabling RENDER acceleration
(II) Jan 22 04:36:28 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Jan 22 04:36:28 NVIDIA(0): enabled.
(II) Jan 22 04:36:28 NVIDIA(GPU-0): No display devices connected; falling back to: CRT-0
(WW) Jan 22 04:36:28 NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
(II) Jan 22 04:36:28 NVIDIA(0): NVIDIA GPU GeForce 9400 (C79) at PCI:4:0:0 (GPU-0)
(--) Jan 22 04:36:28 NVIDIA(0): Memory: 524288 kBytes
(--) Jan 22 04:36:28 NVIDIA(0): VideoBIOS: 62.79.60.00.03
(--) Jan 22 04:36:28 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Jan 22 04:36:28 NVIDIA(0): Connected display device(s) on GeForce 9400 at PCI:4:0:0:
(--) Jan 22 04:36:28 NVIDIA(0): CRT-0
(--) Jan 22 04:36:28 NVIDIA(0): CRT-0: 300.0 MHz maximum pixel clock
(II) Jan 22 04:36:28 NVIDIA(0): Assigned Display Device: CRT-0
(==) Jan 22 04:36:28 NVIDIA(0):
(==) Jan 22 04:36:28 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) Jan 22 04:36:28 NVIDIA(0): will be used as the requested mode.
(==) Jan 22 04:36:28 NVIDIA(0):
(II) Jan 22 04:36:28 NVIDIA(0): Validated modes:
(II) Jan 22 04:36:28 NVIDIA(0): "nvidia-auto-select"
(II) Jan 22 04:36:28 NVIDIA(0): Virtual screen size determined to be 1024 x 768
(WW) Jan 22 04:36:29 NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) Jan 22 04:36:29 NVIDIA(0): from CRT-0's EDID.
(==) Jan 22 04:36:29 NVIDIA(0): DPI set to (75, 75); computed from built-in default
(==) Jan 22 04:36:29 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Jan 22 04:36:31 NVIDIA(GPU-1): NVIDIA GPU GeForce GTX 260M (G92) at PCI:2:0:0 (GPU-1)
(--) Jan 22 04:36:31 NVIDIA(GPU-1): Memory: 1048576 kBytes
(--) Jan 22 04:36:31 NVIDIA(GPU-1): VideoBIOS: 62.92.96.00.0a
(II) Jan 22 04:36:31 NVIDIA(GPU-1): Detected PCI Express Link width: 8X
(--) Jan 22 04:36:31 NVIDIA(GPU-1): Interlaced video modes are supported on this GPU
(--) Jan 22 04:36:31 NVIDIA(GPU-1): Connected display device(s) on GeForce GTX 260M at PCI:2:0:0:
(II) Jan 22 04:36:31 NVIDIA(0): Initialized GPU GART.
(II) Jan 22 04:36:31 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) Jan 22 04:36:31 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Jan 22 04:36:31 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) Initializing extension GLX
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) config/udev: Adding input device "Power Button" (/dev/input/event6)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event6"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "multix"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Power Button" (/dev/input/event7)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event7"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "multix"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event4)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event4"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "multix"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 413c:8157" (/dev/input/event3)
(**) "HID 413c:8157": always reports core events
(**) "HID 413c:8157": Device: "/dev/input/event3"
(II) "HID 413c:8157": Found keys
(II) "HID 413c:8157": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 413c:8157"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "multix"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Logitech USB Receiver" (/dev/input/event2)
(**) "Logitech USB Receiver": always reports core events
(**) "Logitech USB Receiver": Device: "/dev/input/event2"
(II) "Logitech USB Receiver": Found 12 mouse buttons
(II) "Logitech USB Receiver": Found scroll wheel(s)
(II) "Logitech USB Receiver": Found relative axes
(II) "Logitech USB Receiver": Found x and y relative axes
(II) "Logitech USB Receiver": Configuring as mouse
(**) "Logitech USB Receiver": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Receiver": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Receiver"" (type: MOUSE)
(**) "Logitech USB Receiver": (accel) keeping acceleration scheme 1
(**) "Logitech USB Receiver": (accel) acceleration profile 0
(II) "Logitech USB Receiver": initialized for relative axes.
(II) config/udev: Adding input device "Logitech USB Receiver" (/dev/input/mouse1)
(**) "Logitech USB Receiver": always reports core events
(**) "Logitech USB Receiver": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Receiver""
(II) config/udev: Adding input device "Laptop_Integrated_Webcam_2M" (/dev/input/event9)
(**) "Laptop_Integrated_Webcam_2M": always reports core events
(**) "Laptop_Integrated_Webcam_2M": Device: "/dev/input/event9"
(II) "Laptop_Integrated_Webcam_2M": Found keys
(II) "Laptop_Integrated_Webcam_2M": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Laptop_Integrated_Webcam_2M"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "multix"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event1)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event1"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "multix"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/event10)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event10"
(II) "SynPS/2 Synaptics TouchPad": x-axis range 1472 - 5472
(II) "SynPS/2 Synaptics TouchPad": y-axis range 1408 - 4448
(II) "SynPS/2 Synaptics TouchPad": pressure range 0 - 255
(II) "SynPS/2 Synaptics TouchPad": finger width range 0 - 0
(II) "SynPS/2 Synaptics TouchPad": buttons: left right middle
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(II) XINPUT: Adding extended input device ""SynPS/2 Synaptics TouchPad"" (type: TOUCHPAD)
(**) "SynPS/2 Synaptics TouchPad": (accel) keeping acceleration scheme 1
(**) "SynPS/2 Synaptics TouchPad": (accel) acceleration profile 0
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/mouse2)
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(**) "SynPS/2 Synaptics TouchPad": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""SynPS/2 Synaptics TouchPad""
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/event0"
(II) "Macintosh mouse button emulation": Found 3 mouse buttons
(II) "Macintosh mouse button emulation": Found relative axes
(II) "Macintosh mouse button emulation": Found x and y relative axes
(II) "Macintosh mouse button emulation": Configuring as mouse
(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
(**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE)
(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
(II) "Macintosh mouse button emulation": initialized for relative axes.
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
(II) config/udev: Adding input device "ACPI Virtual Keyboard Device" (/dev/input/event16)
(**) "ACPI Virtual Keyboard Device": always reports core events
(**) "ACPI Virtual Keyboard Device": Device: "/dev/input/event16"
(II) "ACPI Virtual Keyboard Device": Found keys
(II) "ACPI Virtual Keyboard Device": Configuring as keyboard
(II) XINPUT: Adding extended input device ""ACPI Virtual Keyboard Device"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "multix"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "Sleep Button": Close
(II) UnloadModule: "evdev"
(II) "HID 413c:8157": Close
(II) UnloadModule: "evdev"
(II) "Logitech USB Receiver": Close
(II) UnloadModule: "evdev"
(II) "Laptop_Integrated_Webcam_2M": Close
(II) UnloadModule: "evdev"
(II) "AT Translated Set 2 keyboard": Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) "Macintosh mouse button emulation": Close
(II) UnloadModule: "evdev"
(II) "ACPI Virtual Keyboard Device": Close
(II) UnloadModule: "evdev"
Reply to: