Re: L'interface graphique ne se lance pas quand le portable est sur batterie.
----- "VINZIO Maxime" <maxime.vinzio@gmail.com> a écrit :
> Bonjour à tous !
>
> Enchanté d'être parmis vous, c'est la première fois que je laisse un
> message sur cette liste pleine de sujets et problèmes interessants :).
>
> Voila, mon problème est dit, j'ai un ordinateur portable asus x56t
> equipé d'une ati radeon hd 3470. Je suis sous debian testing,
> J'ai installé le fglrx via le module assistant, tout marche très bien
> sauf quand j'essaye de démarrer sur batterie, (il me suffit de
> brancher le secteur pour que ça marche).
>
> Le serveur X me retourne alors ces erreurs :
>
> (...)
>
> (II) Loading PCS database from /etc/ati/amdpcsdb
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@1:5:0) found
> (--) Chipset Supported AMD Graphics Processor (0x95C4) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@0:17:0) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@0:18:0) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@0:18:1) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@0:18:2) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@0:19:0) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@0:19:1) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@0:19:2) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@0:20:0) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@0:20:1) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@0:20:2) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@0:20:3) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@0:20:4) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@0:20:5) found
> (WW) fglrx: No matching Device section for instance (BusID
> PCI:0@2:0:1) found
>
> (...)
>
> (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset
> = 0x95c4)
> (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x1875)
> (--) fglrx(0): board vendor info: third party graphics adapter - NOT
> original ATI
> (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
> (--) fglrx(0): MMIO registers at 0xfddf0000
> (--) fglrx(0): I/O port at 0x0000c000
> (==) fglrx(0): ROM-BIOS at 0x000c0000
> (II) fglrx(0): Battery is used
> (II) fglrx(0): Primary V_BIOS segment is: 0xc000
> (II) Loading sub module "vbe"
> (II) LoadModule: "vbe"
> (II) Loading /usr/lib/xorg/modules//libvbe.so
> (II) Module vbe: vendor="X.Org Foundation"
> compiled for 1.6.5, module version = 1.1.0
> ABI class: X.Org Video Driver, version 5.0
> (II) fglrx(0): VESA BIOS detected
> (II) fglrx(0): VESA VBE Version 3.0
> (II) fglrx(0): VESA VBE Total Mem: 16384 kB
> (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
> (II) fglrx(0): VESA VBE OEM Software Rev: 10.88
> (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies
> Inc.
> (II) fglrx(0): VESA VBE OEM Product: M82
> (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
> (II) fglrx(0): ATI Video BIOS revision 9 or later detected
> (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
> (II) fglrx(0): PCIE card detected
> (--) fglrx(0): Using per-process page tables (PPPT) as GART.
> (WW) fglrx(0): board is an unknown third party board, chipset is
> supported
> (II) fglrx(0): PCI bus 1 card 5 func 0
> (**) fglrx(0): Chipset: "ATI Radeon HD 3200 Graphics " (Chipset =
> 0x9612)
> (**) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x1062)
> (**) fglrx(0): board vendor info: third party graphics adapter - NOT
> original ATI
> (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
> (--) fglrx(0): MMIO registers at 0xfdcf0000
> (--) fglrx(0): I/O port at 0x0000b000
> (==) fglrx(0): ROM-BIOS at 0x000c0000
> (II) fglrx(0): Battery is used
>
> Backtrace:
> 0: /usr/bin/X(xorg_backtrace+0x26) [0x4ee056]
> 1: /usr/bin/X(xf86SigHandler+0x39) [0x484199]
> 2: /lib/libc.so.6 [0x7f16ac11bdb0]
> 3:
> /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxDriverEntPriv+0x1)
> [0x7f16aa6becc1]
> 4:
> /usr/lib/xorg/modules/drivers//fglrx_drv.so(swlDalHelperGetLowVoltState+0x18)
> [0x7f16aa6e80d8]
> 5:
> /usr/lib/xorg/modules/drivers//fglrx_drv.so(swlAcpiGetAcState+0x13c)
> [0x7f16aa6fe63c]
> 6: /usr/lib/xorg/modules/drivers//fglrx_drv.so(swlAcpiInit+0xcd)
> [0x7f16aa6feb9d]
> 7: /usr/lib/xorg/modules/drivers//fglrx_drv.so [0x7f16aa6c6049]
> 8: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxPreInit+0x1878)
> [0x7f16aa6c0cd8]
> 9: /usr/bin/X(InitOutput+0xd7c) [0x46debc]
> 10: /usr/bin/X(main+0x200) [0x4331d0]
> 11: /lib/libc.so.6(__libc_start_main+0xe6) [0x7f16ac1085c6]
> 12: /usr/bin/X [0x432819]
>
> Fatal server error:
> Caught signal 11. Server aborting
>
> Je ne sais quoi faire, même un X -configure sur batterie me renvoit
> ces erreurs.
>
> Voici mon xorg.conf, assez épuré : il a été généré par un aticonfig
> --initial (un X -configure renvoit les mêmes erreurs qu'il soit
> branché sur batterie ou non):
>
>
> Section "ServerLayout"
> Identifier "aticonfig Layout"
> Screen 0 "aticonfig-Screen[0]-0" 0 0
> EndSection
>
> Section "Files"
> EndSection
>
> Section "Module"
> EndSection
>
> Section "Monitor"
> Identifier "aticonfig-Monitor[0]-0"
> Option "VendorName" "ATI Proprietary Driver"
> Option "ModelName" "Generic Autodetecting Monitor"
> Option "DPMS" "true"
> EndSection
>
> Section "Device"
> Identifier "aticonfig-Device[0]-0"
> Driver "fglrx"
> BusID "PCI:2:0:0"
> EndSection
>
> Section "Screen"
> Identifier "aticonfig-Screen[0]-0"
> Device "aticonfig-Device[0]-0"
> Monitor "aticonfig-Monitor[0]-0"
> DefaultDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 24
> EndSubSection
> EndSection
>
> Merci :)
>
> Maxime Vinzio
A tu laptop-detect d'installer ??
--
Patrick Dos Santos
GPG Fingerprint : CECA DABA 25BB D2C0 0CE1 4315 AF7E 8886 B358 A349
GPG Key: gpg --keyserver pgp.mit.edu --recv-keys 0xB358A349
http://www.unautrepc.com
Reply to: