Re: Carte TV ASUS P7131 Hybrid (toujours ...)
On Sat, May 03, 2008 at 11:33:49PM +0200, Frederic MASSOT wrote :
> mahashakti89 a écrit :
>> Bonsoir !
>>
>> Bon je n'arrive toujours pas à avoir la moindre image avec cette carte
>> .... J'ai lu plusieurs docs, demandé sur une liste spécialisée pour les
>> bonnes options (card=112 tuner=54) , les bons périphériques sont créés.
>>
> Bonjour,
>
> J'utilise cette carte pour la TNT avec Kaffeine sans problème, les
> noyaux récents la détecte automatiquement.
>
> Voici un extrait de dmesg avec un noyau 2.6.25 :
> Linux video capture interface: v2.00
> saa7130/34: v4l2 driver version 0.2.14 loaded
> ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 16 (level, low) -> IRQ 16
> saa7133[0]: found at 0000:05:03.0, rev: 209, irq: 16, latency: 64, mmio:
> 0xff7ff000
> saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid
> [card=112,autodetected]
> saa7133[0]: board init: gpio is 40000
> input: saa7134 IR (ASUSTeK P7131 Hybri as /class/input/input4
> saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff
> saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> tuner' 1-004b: chip found @ 0x96 (saa7133[0])
> tda8290 1-004b: setting tuner address to 61
> tda8290 1-004b: type set to tda8290+75a
> saa7133[0]: registered device video0 [v4l2]
> saa7133[0]: registered device vbi0
> saa7133[0]: registered device radio0
> DVB: registering new adapter (saa7133[0])
> DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
> tda1004x: setting up plls for 48MHz sampling clock
> tda1004x: timeout waiting for DSP ready
> tda1004x: found firmware revision 0 -- invalid
> tda1004x: trying to boot from eeprom
> tda1004x: timeout waiting for DSP ready
> tda1004x: found firmware revision 0 -- invalid
> tda1004x: waiting for firmware upload...
> tda1004x: found firmware revision 29 -- ok
>
J'ai la méme chose dans les logs :
saa7133[0]: found at 0000:02:0b.0, rev: 209, irq: 23, latency: 64, mmio:
0xfeaff000
saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid
[card=112,insmod option]
saa7133[0]: board init: gpio is 0
input: saa7134 IR (ASUSTeK P7131 Hybri as /class/input/input4
logips2pp: Detected unknown logitech mouse model 127
saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2
92
saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff
ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff
ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff
ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff
saa7133[0]: i2c scan: found device @ 0x10 [???]
saa7133[0]: i2c scan: found device @ 0x96 [???]
saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
tuner 1-004b: chip found @ 0x96 (saa7133[0])
tda8290 1-004b: setting tuner address to 61
input: ImExPS/2 Logitech Explorer Mouse as /class/input/input5
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP]
tuner 1-004b: type set to tda8290+75a
tda8290 1-004b: setting tuner address to 61
tuner 1-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1f.5 to 64
DVB: registering new adapter (saa7133[0])
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: trying to boot from eeprom
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
et à la fin de demesg | more
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 20 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 20 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 20 -- ok
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 20 -- ok
> Est-ce que tu as téléchargé le firmware "dvb-fe-tda10046.fw" avec la > commande /usr/src/linux/Documentation/dvb/get_dvb_firmware ?
>
Oui , mais les logs m'indiquent une firmware revision 20
> Dans /dev/dvb/adapter0/ j'ai :
>
> crw-rw---- 1 root video 212, 4 mai 3 16:26 demux0
> crw-rw---- 1 root video 212, 5 mai 3 16:26 dvr0
> crw-rw---- 1 root video 212, 3 mai 3 16:26 frontend0
> crw-rw---- 1 root video 212, 7 mai 3 16:26 net0
>
>
> Au début de la TNT en France les fichiers qui contenait les fréquences
> devait être adaptés avec un offset de 167 kHz, maintenant il y a du
> avoir des Linuxiens dans ta région qui ont envoyés des correctifs.
>
> Pour scanner les chaines facilement essaye avec la commande "scan" du
> paquet dvb-utils et retourne nous le résultat :
>
> scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-ta_ville
>i
scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Auxerre
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Auxerre
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 570000000 0 9 9 3 1 4 0
initial transponder 794000000 0 9 9 3 1 4 0
initial transponder 770000000 0 9 9 3 1 4 0
initial transponder 546000000 0 9 9 3 1 4 0
initial transponder 586000000 0 9 9 3 1 4 0
initial transponder 562000000 0 9 9 3 1 4 0
>>> tune to:
>>> 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
>>> 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
>>> (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
>>> 794000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
>>> 794000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
>>> (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
>>> 770000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
>>> 770000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
>>> (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
>>> 546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
>>> 546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
>>> (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
>>> 586000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
>>> 586000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
>>> (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
>>> 562000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
>>> 562000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
>>> (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
Bon je pense définitivement à un problème d'antenne ... (??)
mahashakti89
Merci à tous ...
Reply to: