[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: Monter un disque qui était en Raid 5



Fdisk me donne:
###########################################################################
Device contains neither a valid DOS partition, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only, until you
decide to write them. After that, of course, the previous content won't be
recoverable.

The number of cylinders for this disk is set to 238216.
There is nothing wrong with that, but this is larger than 1024, and could in
certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2
FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by
w(rite)
############################################################################


Et p me donne:
######################################################
Disk /dev/hdb: 122.9 GB
16 heads, 63 sectors, etc....
Device Boot 	Start End	Blocks	Id	System
######################################################


Très cordialement,
 
Ludovic DAVID
Administrateur Réseau
-------------------------------------------
Articque
www.articque.com
Moulin des Roches
37230 Fondettes - France
tel : 02-47-49-90-49
fax : 02-47-49-91-49

-----Message d'origine-----
De : news [mailto:news@ger.gmane.org] De la part de BM
Envoyé : lundi 12 novembre 2007 17:23
À : debian-user-french@lists.debian.org
Objet : Re: Monter un disque qui était en Raid 5

Ludovic DAVID a écrit :
> Je n'ai pas de hdb1, seulement hdb comme si la partition n'était pas
> formatée.

que donne la commande

#fdisk/dev/hdb

puis appui sur p et dis nous ce que cela t'affiche



> Je risque de perdre les données (s'il y en a) si je fais un mkfs, non?

Oui, tu perds tout ce qu'il y avait dessus



Bernard


-- 
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench   
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org



Reply to: