Re: grub : plantage démarrage Windows2000
Yannick P. a écrit :
Le Sat, 07 Jul 2007 15:01:22 +0200,
hervé thibaud <ht_deb@beltegeuse.org> a écrit :
Bonjour,
Je veux installer sur un disque donné 200Go Windows2000 et Debian
(testing - à partir d'un CD d'installation téléchargé hier).
J'en suis à la deuxième tentative d'installation.
[...]
Je ne suis pas sûr de tout comprendre, peut-être pourrais-tu donner le
résultat d'un fdisk -l et le contenu du menu.lst de GRUB.
Tu avais demandé à l'installation de Debian de placer GRUB dans la MBR
ou le premier secteur d'un disque ?
fdisk - l ----------------------------------------------
Disk /dev/hda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 10496 84309088+ 7 HPFS/NTFS
/dev/hda2 10497 24133 109539202+ 83 Linux
/dev/hda3 24134 24321 1510110 5 Extended
/dev/hda5 24134 24321 1510078+ 82 Linux swap / Solaris
Disk /dev/hdb: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 * 1 7296 58605088+ 7 HPFS/NTFS
----------------------------------------------------------
menu.lst de grub ---------------------------
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from
0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default
entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved'
or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the
default entry
# (normally the first entry defined).
timeout 5
# Pretty colours
color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive
editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/hda2 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,1)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(single-user mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Debian GNU/Linux, kernel 2.6.18-4-686
root (hd0,1)
kernel /boot/vmlinuz-2.6.18-4-686 root=/dev/hda2 ro
initrd /boot/initrd.img-2.6.18-4-686
savedefault
title Debian GNU/Linux, kernel 2.6.18-4-686 (single-user mode)
root (hd0,1)
kernel /boot/vmlinuz-2.6.18-4-686 root=/dev/hda2 ro single
initrd /boot/initrd.img-2.6.18-4-686
savedefault
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title Microsoft Windows 2000 Professionnel
root (hd0,0)
savedefault
makeactive
chainloader +1
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hdb1
title Microsoft Windows 2000 Professionnel
root (hd1,0)
savedefault
makeactive
map (hd0) (hd1)
map (hd1) (hd0)
chainloader +1
Reply to: