[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: install de lm-sensors



Thierry B <debian@thierry.eu.org> wrote:
| Bonjour,
| 
| J'ai installé le paquet lm-sensors sous debian sid avec apt.
| 
| Jai recompilé mon noyau pour le support des différents modules, sauf
| pour smbus-arp, que je n'ai pas trouvé mais appremment, celui-là n'est
| pas obligatoire non?
| 
| Voila ce qu'ils ont rajouté dans mon /etc/modules:
| 
| # Generated by sensors-detect on Fri Jan 27 15:14:21 2006
| # I2C adapter drivers
| i2c-i801
| # I2C chip drivers
| # Warning: the required module asb100 is not currently installed on your
| system.
| # For status of 2.6 kernel ports see
| http://secure.netroedge.com/~lm78/supported.html
| # If driver is built-in to the kernel, or unavailable, comment out the
| following line.
| asb100
| # Warning: the required module smbus-arp is not currently installed on
| your system.
| # For status of 2.6 kernel ports see
| http://secure.netroedge.com/~lm78/supported.html
| # If driver is built-in to the kernel, or unavailable, comment out the
| following line.
| #smbus-arp
| 
| Donc, j'ai décoché smbus-arp.
| 
| Quand je tape sensors, voila ce qu'il m'affiche:
| 
| sb100-i2c-0-2d
| Adapter: SMBus I801 adapter at e800
| VCore 1:   +1.71 V  (min =  +1.66 V, max =  +1.84 V)
| +3.3V:     +3.34 V  (min =  +3.14 V, max =  +3.47 V)
| +5V:       +5.05 V  (min =  +4.76 V, max =  +5.24 V)
| +12V:     +11.43 V  (min = +10.82 V, max = +13.19 V)
| -12V (reserved):
|           -11.94 V  (min =  -0.00 V, max =  -0.00 V)
| -5V (reserved):
|            -5.01 V  (min =  -0.00 V, max =  -0.00 V)
| CPU Fan:  3629 RPM  (min = 1997 RPM, div = 4)
| Chassis Fan:
|              0 RPM  (min = 3994 RPM, div = 2)
| Power Fan:   0 RPM  (min = 3994 RPM, div = 2)
| M/B Temp:    +42°C  (high =   +45°C, hyst =   +40°C)
| CPU Temp (Intel):
|              +40°C  (high =   +60°C, hyst =   +50°C)
| Power Temp:
|             +124°C  (high =   +45°C, hyst =   +40°C)
| CPU Temp (AMD):
|              -41°C  (high =   +60°C, hyst =   +50°C)
| vid:      +1.750 V  (VRM Version 9.0)
| alarms:
| 
| 
puisque j'ai l'asb100 :
asb100-i2c-0-2d
Adapter: SMBus I801 adapter at e800
VCore 1:   +1.57 V  (min =  +1.42 V, max =  +1.57 V)       ALARM
+3.3V:     +3.38 V  (min =  +3.14 V, max =  +3.47 V)
+5V:       +5.08 V  (min =  +4.76 V, max =  +5.24 V)
+12V:     +11.67 V  (min = +10.82 V, max = +13.19 V)
-12V (reserved):
-12.13 V  (min =  -0.00 V, max =  -0.00 V)
-5V (reserved):
-5.09 V  (min =  -0.00 V, max =  -0.00 V)
CPU Fan:  2220 RPM  (min = 1997 RPM, div = 4)
fan2:        0 RPM  (min = 3994 RPM, div = 2)
Power Fan:   0 RPM  (min = 3994 RPM, div = 2)
M/B Temp:    +26°C  (high =   +45°C, hyst =   +40°C)
vid:      +1.500 V  (VRM Version 9.0)
		     

mess-mate                               
-- 

Big book, big bore.
		-- Callimachus



Reply to: