plantage suite deconnexion USB
Bonjour
J'utilise une debian sarge kernel-image 2.6.8 sur une
lame HS20 de bladecenter hors à chaque fois que je
debranche le lecteur de cd usb j'ai un plantage et je
suis obligé de rebooter. Voila un log de dmesg juste
avant le plantage.
J'ai essayé de trouver un bug : mon problème ressemble
au suivant
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=288998
mais m'y à part changer de version de noyau je n'ai
pas trouvé de soluce mais je ne sais pas si c'est le
même bug donc je veux pas poster en doublon.
Est-ce que quelqu'un aurait une idée ?
Si c'est un nouveau bug comment en être sûr ?
merci pour votre aide
AC
Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02cc960(lo)
IPv6 over IPv4 tunneling driver
eth1: no IPv6 routers present
bond0: no IPv6 routers present
eth0: no IPv6 routers present
nfsd: last server has exited
nfsd: unexporting all filesystems
usb 1-1: new full speed USB device using address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new full speed USB device using address 3
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: TEAC Model: FD-05PUB Rev: 3200
Type: Direct-Access ANSI SCSI
revision: 02
Attached scsi removable disk sdb at scsi1, channel 0,
id 0, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 0,
lun 0, type 0
USB Mass Storage device found at 3
usb 1-1.2: new full speed USB device using address 4
usb 1-1.2: device not accepting address 4, error -71
usb 1-1.2: new full speed USB device using address 5
usb 1-1.2: device not accepting address 5, error -71
usb 1-1.3: new full speed USB device using address 6
scsi2 : SCSI emulation for USB Mass Storage devices
Vendor: HL-DT-ST Model: DVD-ROM GDR8082N Rev: 0L03
Type: CD-ROM ANSI SCSI
revision: 02
sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0,
lun 0
Attached scsi generic sg2 at scsi2, channel 0, id 0,
lun 0, type 5
USB Mass Storage device found at 6
usb 1-1.2: new full speed USB device using address 7
scsi3 : SCSI emulation for USB Mass Storage devices
Vendor: Genesys Model: USB to IDE Disk Rev: 0033
Type: Direct-Access ANSI SCSI
revision: 02
SCSI device sdc: 8452080 512-byte hdwr sectors (4327
MB)
sdc: assuming Write Enabled
sdc: assuming drive cache: write through
/dev/scsi/host3/bus0/target0/lun0: p1
Attached scsi removable disk sdc at scsi3, channel 0,
id 0, lun 0
Attached scsi generic sg3 at scsi3, channel 0, id 0,
lun 0, type 0
USB Mass Storage device found at 7
usb 1-1.2: USB disconnect, address 7
usb 1-1: USB disconnect, address 2
usb 1-1.1: USB disconnect, address 3
usb 1-1.3: USB disconnect, address 6
scsi: Device offlined - not ready after error
recovery: host 2 channel 0 id 0 lu
n 0
sr 2:0:0:0: Illegal state transition cancel->offline
Badness in scsi_device_set_state at
drivers/scsi/scsi_lib.c:1643
[<f884e627>] scsi_device_set_state+0xc4/0xcf
[scsi_mod]
[<f884c784>] scsi_eh_offline_sdevs+0x47/0x60
[scsi_mod]
[<f884cd67>] scsi_unjam_host+0x18d/0x1a2 [scsi_mod]
[<f884ce92>] scsi_error_handler+0x116/0x15a
[scsi_mod]
[<f884cd7c>] scsi_error_handler+0x0/0x15a [scsi_mod]
[<c01041e5>] kernel_thread_helper+0x5/0xb
Badness in kobject_get at lib/kobject.c:433
[<c018cd05>] kobject_get+0x2e/0x38
[<c01d1e53>] get_device+0x13/0x1a
[<f884def2>] scsi_request_fn+0x20/0x35b [scsi_mod]
[<c01d714a>] blk_insert_request+0x87/0xa9
[<f884d17d>] scsi_queue_insert+0x84/0x8e [scsi_mod]
[<f884cb82>] scsi_eh_flush_done_q+0x7e/0xd6
[scsi_mod]
[<f884cd74>] scsi_unjam_host+0x19a/0x1a2 [scsi_mod]
[<f884ce92>] scsi_error_handler+0x116/0x15a
[scsi_mod]
[<f884cd7c>] scsi_error_handler+0x0/0x15a [scsi_mod]
[<c01041e5>] kernel_thread_helper+0x5/0xb
Unable to handle kernel paging request at virtual
address 00100104
printing eip:
f884fd36
*pde = 00000000
Oops: 0002 [#1]
PREEMPT
Modules linked in: nls_iso8859_1 nls_cp437 vfat fat
ipv6 nfsd exportfs lockd sun
rpc bonding ext3 jbd bcm5700 tsdev
mousedev joydev evdev rtc pcspkr shpchp pcieh
p pci_hotplug
psmouse firmware_class ds yenta_socket pcmcia_core
sr_mod sd_mod i
de_cd cdrom ide_disk ide_generic pdc202xx_new
aec62xx alim15x3 amd74xx atiixp cm
d64x cs5520 cs5530 cy82c693
generic hpt34x ns87415 opti621 pdc202xx_old rz1000 s
c1200
serverworks siimage sis5513 slc90e66 triflex trm290
via82cxxx piix usbseri
al usbhid usbkbd uhci_hcd thermal
processor fan font vesafb cfbcopyarea cfbimgbl
t cfbfillrect
usb_storage usbcore ide_core sg mptscsih mptbase
scsi_mod unix
CPU: 0
EIP: 0060:[<f884fd36>] Not tainted
EFLAGS: 00010002 (2.6.8-debian-0.3)
EIP is at scsi_device_dev_release+0x2d/0xf9 [scsi_mod]
eax: 00100100 ebx: e341f408 ecx: 00200200 edx:
e341f584
esi: e341f400 edi: 00000286 ebp: f75e94b4 esp:
e35f7ef0
ds: 007b es: 007b ss: 0068
Process scsi_eh_2 (pid: 6713, threadinfo=e35f6000
task=e3470b50)
Stack: e341f5a8 c02cbc08 c02cbc20 f75e94d8 c01d1bfd
e341f584 c018cd4f e341f5a8
e35f6000 f7418200 e341f400 e3670e2c f884e222
e341f5a8 f75e9400 f75eb4b0
f7418200 e3670e2c 00000202 c01d714a e3670e2c
e341f400 f7418200 f75e9400
Call Trace:
[<c01d1bfd>] device_release+0x14/0x44
[<c018cd4f>] kobject_cleanup+0x40/0x65
[<f884e222>] scsi_request_fn+0x350/0x35b [scsi_mod]
[<c01d714a>] blk_insert_request+0x87/0xa9
[<f884d17d>] scsi_queue_insert+0x84/0x8e [scsi_mod]
[<f884cb82>] scsi_eh_flush_done_q+0x7e/0xd6
[scsi_mod]
[<f884cd74>] scsi_unjam_host+0x19a/0x1a2 [scsi_mod]
[<f884ce92>] scsi_error_handler+0x116/0x15a
[scsi_mod]
[<f884cd7c>] scsi_error_handler+0x0/0x15a [scsi_mod]
[<c01041e5>] kernel_thread_helper+0x5/0xb
Code: 89 48 04 89 01 c7 43 04 00 02 20 00 8d 9a 8c fe
ff ff 8b 82
<6>note: scsi_eh_2[6713] exited with preempt_count 1
Badness in kobject_get at lib/kobject.c:433
[<c018cd05>] kobject_get+0x2e/0x38
[<c01d1e53>] get_device+0x13/0x1a
[<f884def2>] scsi_request_fn+0x20/0x35b [scsi_mod]
[<c01d699d>] __generic_unplug_device+0x2c/0x2f
[<c01d69b6>] generic_unplug_device+0x16/0x2a
[<c01d69ee>] blk_unplug_work+0xb/0xd
[<c0123ca1>] worker_thread+0x1b7/0x245
[<c01d69e3>] blk_unplug_work+0x0/0xd
[<c0115227>] default_wake_function+0x0/0x12
[<c0115227>] default_wake_function+0x0/0x12
[<c0123aea>] worker_thread+0x0/0x245
[<c0126bd2>] kthread+0x6d/0x97
[<c0126b65>] kthread+0x0/0x97
[<c01041e5>] kernel_thread_helper+0x5/0xb
Unable to handle kernel paging request at virtual
address 00100104
printing eip:
f884fd36
*pde = 00000000
Oops: 0002 [#2]
PREEMPT
Modules linked in: nls_iso8859_1 nls_cp437 vfat fat
ipv6 nfsd exportfs lockd sun
rpc bonding ext3 jbd bcm5700 tsdev
mousedev joydev evdev rtc pcspkr shpchp pcieh
p pci_hotplug
psmouse firmware_class ds yenta_socket pcmcia_core
sr_mod sd_mod i
de_cd cdrom ide_disk ide_generic pdc202xx_new
aec62xx alim15x3 amd74xx atiixp cm
d64x cs5520 cs5530 cy82c693
generic hpt34x ns87415 opti621 pdc202xx_old rz1000 s
c1200
serverworks siimage sis5513 slc90e66 triflex trm290
via82cxxx piix usbseri
al usbhid usbkbd uhci_hcd thermal
processor fan font vesafb cfbcopyarea cfbimgbl
t cfbfillrect
usb_storage usbcore ide_core sg mptscsih mptbase
scsi_mod unix
CPU: 0
EIP: 0060:[<f884fd36>] Not tainted
EFLAGS: 00010002 (2.6.8-debian-0.3)
EIP is at scsi_device_dev_release+0x2d/0xf9 [scsi_mod]
eax: 00100100 ebx: e341f408 ecx: 00200200 edx:
e341f584
esi: e341f400 edi: 00000286 ebp: f75e94b4 esp:
f75c5ef8
ds: 007b es: 007b ss: 0068
Process kblockd/0 (pid: 44, threadinfo=f75c4000
task=f75c36f0)
Stack: e341f5a8 c02cbc08 c02cbc20 f75e94d8 c01d1bfd
e341f584 c018cd4f e341f5a8
f75c4000 e3670f1c e341f400 e3670e2c f884e222
e341f5a8 f75e9400 e3670e2c
e3670f1c f75c4000 00000293 c01d699d e3670e2c
f75c4000 c01d69b6 e3670e2c
Call Trace:
[<c01d1bfd>] device_release+0x14/0x44
[<c018cd4f>] kobject_cleanup+0x40/0x65
[<f884e222>] scsi_request_fn+0x350/0x35b [scsi_mod]
[<c01d699d>] __generic_unplug_device+0x2c/0x2f
[<c01d69b6>] generic_unplug_device+0x16/0x2a
[<c01d69ee>] blk_unplug_work+0xb/0xd
[<c0123ca1>] worker_thread+0x1b7/0x245
[<c01d69e3>] blk_unplug_work+0x0/0xd
[<c0115227>] default_wake_function+0x0/0x12
[<c0115227>] default_wake_function+0x0/0x12
[<c0123aea>] worker_thread+0x0/0x245
[<c0126bd2>] kthread+0x6d/0x97
[<c0126b65>] kthread+0x0/0x97
[<c01041e5>] kernel_thread_helper+0x5/0xb
Code: 89 48 04 89 01 c7 43 04 00 02 20 00 8d 9a 8c fe
ff ff 8b 82
<6>note: kblockd/0[44] exited with preempt_count 1
___________________________________________________________________________
Nouveau : téléphonez moins cher avec Yahoo! Messenger ! Découvez les tarifs exceptionnels pour appeler la France et l'international.
Téléchargez sur http://fr.messenger.yahoo.com
Reply to: