[Etch]Plantage de k3b
Bonjours tout le monde,
j'avais posté il y a quelques jours sur la liste pour ce problème entre
autre, et depuis j'ai continué à chercher de mon coté ce qui clochait
sans rien trouver de bien convaincant.
Résumé de la situation:
Lorsque je lance k3b et que je veux formater un CD ou un DVD, je n'ai
aucun problème.
En revanche, la gravure des DVD commence à clocher. Le graveur me grave
le DVD mais à la fin, de la gravure, k3b plante lamentablement à l'étape
de "vidage de la mémoire tampon".
Et le meilleur pour la fin, lorsque je veux graver un CD, k3b se bloque
en me renvoyant ce doux message:
/System
-----------------------
K3b Version: 0.12.17
KDE Version: 3.5.5
QT Version: 3.3.7
Kernel: 2.6.17-ulysse
Devices
-----------------------
TSSTcorp CD/DVDW TS-L532A TI51 (/dev/hdb, ) at /media/cdrom0 [CD-R;
CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL]
[DVD-ROM; DVD-R séquentiel; DVD RW à réinscription limitée; DVD-RW
séquentiel; DVD+RW; DVD+R; DVD+R double couche; CD-ROM; CD-R; CD-RW]
[SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R96R; Réinscription restreinte]
K3b
-----------------------
Size of filesystem calculated: 44518
Used versions
-----------------------
cdrecord: 2.1.1a03
cdrecord
-----------------------
This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
way, don't refer to it as "cdrecord". Send problem reports to
debburn-devel@lists.alioth.debian.org, don't bother Joerg Schilling with any
problems caused by this application.
Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling
scsidev: '/dev/hdb'
devname: '/dev/hdb'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Warning: Cannot gain SYS_RAWIO capability: Operation not permitted
Possible reason: wodim not installed SUID root.
/usr/bin/X11/wodim: Warning: using inofficial version of libscg (debburn
project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright
1988,1995,2000-2004 J. Schilling').
/usr/bin/X11/wodim: Warning: using inofficial libscg transport code
version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86
05/11/22 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
TOC Type: 3 = CD-ROM XA mode 2
Warning: This version of libscg has not been configured via the standard
autoconfiguration method of the Schily makefile system. There is a high risk
that the code is not configured correctly and for this reason will not
behave
as expected.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identifikation : 'CD/DVDW TS-L532A'
Revision : 'TI51'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0011
Profile: 0x0013
Profile: 0x0014
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1451664 = 1417 KB
FIFO size : 4194304 = 4096 KB
Error: Cannot gain SYS_RAWIO capability, is wodim installed SUID root?
Reason: Operation not permitted
/usr/bin/X11/wodim: Probably trying to use ultra high speed+ medium on
improper writer.
Track 01: data 86 MB
Total size: 99 MB (09:53.60) = 44520 sectors
Lout start: 100 MB (09:55/45) = 44520 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 0
Reference speed: 0
Is not unrestricted
Is erasable
Disk sub type: Ultra High speed+ Rewritable media (3)
ATIP start of lead in: -11075 (97:34/25)
ATIP start of lead out: 359849 (79:59/74)
2T speed low: 8 2T speed high: 32
power mult factor: 0 0
recommended erase/write power: 0
A1 values: 00 00 80
A2 values: 39 80 00
A3 values: 04 C4 B8
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 315329
Speed set to 1764 KB/s
cdrecord command:
-----------------------
/usr/bin/X11/wodim -v gracetime=2 dev=/dev/hdb speed=10 -tao
driveropts=burnfree -eject fs=4m -multi -xa -tsize=44518s -
mkisofs
-----------------------
44518
I: -input-charset not specified, using ISO-8859-1 (detected in locale
settings)
/(... le contenu à graver...)/
1.15% done, estimate finish Tue Oct 31 22:12:21 2006
2.27% done, estimate finish Tue Oct 31 22:09:31 2006
3.40% done, estimate finish Tue Oct 31 22:08:32 2006
4.51% done, estimate finish Tue Oct 31 22:09:10 2006
mkisofs command:
-----------------------
/(...)/
/
/
/Si quelqu'un a une idée pour résoudre ce problème, je suis preneur :)
Merci par avance.
Reply to: