Re: Problem to configure Deban Sarge on Asus L3000D!
Thanks florian I have tried what you told me but that doesn't work. I
put all the information you
ask me at the end (there is a lot I hope it's still readable)
Thanks a lot for your time
Niko
PS: your command for XFree86.0.log didn't worked so I have joined the file
Florian Kulzer wrote:
nikor6@free.fr wrote:
Hi everybody,
I have install Debian on my Asus L300D but I have some problèmes
to configure the power management and my screen resolution.
My video card is a SIS M650_651_650_740, during the installation I
took the
vesa driver by mistake but I changed that using dpkg-reconfigure
xserver-xfree86
but no result my max resolution is still 800x600 instead of 1024x768.
Make sure that you have the packages "discover", "mdetect", "xresprobe"
and "read-edid" installed. Then run "dpkg-reconfigure --priority=low
xserver-xfree86". The dialog should offer you the option to select the
"sis" driver and a higher resolution. If the display still does not work
nicely after that, post your /etc/X11/XF86Config-4 and the output of
"egrep '^\((EE|WW)\)' /var/log/XFree86.0.log" (error messages and
warnings of the X server). More information about the sis driver can be
found with "man sis".
For the power management i have install, acpi with powernowd. I have
noticed
that
during the boot that there is something that it doesn't found in
sysfs.conf
but I don't manage to figure out what.
Regarding the error message during boot: You might be able to stop the
display by pressing the "ScrollLock" key at the right moment so that you
can read the message. (The boot process will continue when you press the
key a second time.) Otherwise might be enough to look at output of the
"dmesg" command (which you have to run as root), or you could activate
the bootlog daemon by changing /etc/default/bootlogd so that the second
line reads "BOOTLOGD_ENABLE=Yes".
Regarding your problem with acpi and the fan: The first thing to check
is if all necessary modules are loaded properly. You can do this with
"lsmod | grep acpi". My guess is that you should see at least
"acpi_fan", "acpi_processor", "acpi_thermal" and "acpi_asus". If some
modules are missing you can try to load them with modprobe (as root),
e.g. "modprobe acpi_asus". If you get any error messages you should post
them here.
Regards,
Florian
*********************************************************************************
I have reconfigue xserver-xfree86
*********************************************************************************
debian:/home/niko# dpkg-reconfigure xserver-xfree86
debconf: unable to initialize frontend: Kde
debconf: (Can't locate Qt.pm in @INC (@INC contains: /etc/perl
/usr/local/lib/perl/5.8.4 /usr/local/share/perl/5.8.4 /usr/lib/perl5
/usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8
/usr/local/lib/site_perl .) at
/usr/share/perl5/Debconf/FrontEnd/Kde/Wizard.pm line 7.)
debconf: falling back to frontend: Dialog
debian:/home/niko#
---I have check man sis and my video card is supported
---I have install all the package that you told me plus some suggested
with them and a banch of other concerning laptops but no changes.
*********************************************************************************************
debian:/home/niko# cat /etc/X11/XF86Config-4
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "false"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "sis"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-60
VertRefresh 50-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
debian:/home/niko#
------------------------------------------------------
During reconfig I put the name of my video card and 1024x748 for the
resolution but this doesn't appear here.
*********************************************************************************************
debian:/home/niko# egrep '^\((EE|WW)\)' /var/log/XFree86.0.log
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
debian:/home/niko#
*********************************************************************************************
debian:/home/niko# lsmod | grep acpi
debian:/home/niko# modprobe
Usage: modprobe [-v] [-V] [-C config-file] [-n] [-i] [-q] [-o <modname>]
<modname> [parameters...]
modprobe -r [-n] [-i] [-v] <modulename> ...
modprobe -l -t <dirname> [ -a <modulename> ...]
debian:/home/niko# modprobe acpi_fan
FATAL: Module acpi_fan not found.
debian:/home/niko# modprobe acpi_processor
FATAL: Module acpi_processor not found.
debian:/home/niko# modprobe acpi_thermal
FATAL: Module acpi_thermal not found.
debian:/home/niko# modprobe acpi-asus
FATAL: Module acpi_asus not found.
*********************************************************************************************
For the problem during the boot the message was that powernowd was not
able to find sthg in sysfs.conf and
told me to read /usr/share/doc/powernowd/README.Debian
--------------------------
You also need to have the sysfs file system mounted, so that the daemon can
find the interface to the frequency scaling support in the kernel. If that
isn't already done, mkdir /sys and add an entry to /etc/fstab that looks
something like this:
sysfs /sys sysfs defaults 0 0
The entry that must be visible before powernowd can function is:
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
If that file isn't present, then the /etc/init.d/powernowd script will point
you to this file instead of trying to launch the daemon...
--------------------
So I added the line in sysfs.conf but the problem is that I don't have
any files in cpu0:
debian:/sys/devices/system/cpu/cpu0# ls
debian:/sys/devices/system/cpu/cpu0#
-----------------------
Thanks a lot
Niko
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14sarge1 20050901212727 fjp@localhost.localdomain)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.8-16.0508-2 i686 [ELF]
Build Date: 02 September 2005
This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way. Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.
We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.
Before filing a bug report, you may want to consult the Debian X FAQ:
XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz
Module Loader present
OS Kernel: Linux version 2.6.8-3-386 (root@lart) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Thu Feb 9 07:17:13 UTC 2006
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Mar 31 20:00:40 2006
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000cf8, mode1Res1 = 0x00000cf8
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0740 card 0000,0000 rev 01 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0962 card 0000,0000 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:02:1: chip 1039,0016 card 0000,0000 rev 00 class 0c,05,00 hdr 00
(II) PCI: 00:02:5: chip 1039,5513 card 1043,1658 rev 00 class 01,01,80 hdr 00
(II) PCI: 00:02:6: chip 1039,7013 card 1043,1696 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:7: chip 1039,7012 card 1043,1653 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,7001 card 1043,1659 rev 0f class 0c,03,10 hdr 80
(II) PCI: 00:03:1: chip 1039,7001 card 1043,1659 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:2: chip 1039,7001 card 1043,1659 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:3: chip 1039,7002 card 1043,165a rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:04:0: chip 1039,0900 card 1043,1455 rev 90 class 02,00,00 hdr 00
(II) PCI: 00:0a:0: chip 1180,0476 card 4000,0000 rev aa class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 1180,0476 card 4800,0000 rev aa class 06,07,00 hdr 82
(II) PCI: 00:0a:2: chip 1180,0552 card 1043,1657 rev 02 class 0c,00,10 hdr 80
(II) PCI: 01:00:0: chip 1039,6325 card 1043,1612 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe7800000 - 0xe7ffffff (0x800000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf0000000 - 0xfebfffff (0xec00000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x10400000 - 0x107fffff (0x400000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x10000000 - 0x103fffff (0x400000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 6: bridge is at (0:10:1), (0,6,9), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[1] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0x10c00000 - 0x10ffffff (0x400000) MX[B]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x10800000 - 0x10bfffff (0x400000) MX[B]
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] SiS650/651/M650/740 PCI/AGP VGA Display Adapter rev 0, Mem @ 0xf0000000/27, 0xe7800000/17, I/O @ 0xd800/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xebffffff to 0xe7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe0800000 - 0xe08007ff (0x800) MX[B]
[1] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B]
[2] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[3] -1 0 0xe6000000 - 0xe6000fff (0x1000) MX[B]
[4] -1 0 0xe6800000 - 0xe6800fff (0x1000) MX[B]
[5] -1 0 0xe7000000 - 0xe7000fff (0x1000) MX[B]
[6] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[7] -1 0 0xe7800000 - 0xe781ffff (0x20000) MX[B](B)
[8] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[9] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[10] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[B]
[11] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[12] -1 0 0x0000b000 - 0x0000b07f (0x80) IX[B]
[13] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[14] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[15] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[16] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe0800000 - 0xe08007ff (0x800) MX[B]
[1] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B]
[2] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[3] -1 0 0xe6000000 - 0xe6000fff (0x1000) MX[B]
[4] -1 0 0xe6800000 - 0xe6800fff (0x1000) MX[B]
[5] -1 0 0xe7000000 - 0xe7000fff (0x1000) MX[B]
[6] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[7] -1 0 0xe7800000 - 0xe781ffff (0x20000) MX[B](B)
[8] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[9] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[10] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[B]
[11] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[12] -1 0 0x0000b000 - 0x0000b07f (0x80) IX[B]
[13] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[14] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[15] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[16] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe0800000 - 0xe08007ff (0x800) MX[B]
[6] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B]
[7] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[8] -1 0 0xe6000000 - 0xe6000fff (0x1000) MX[B]
[9] -1 0 0xe6800000 - 0xe6800fff (0x1000) MX[B]
[10] -1 0 0xe7000000 - 0xe7000fff (0x1000) MX[B]
[11] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[12] -1 0 0xe7800000 - 0xe781ffff (0x20000) MX[B](B)
[13] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[17] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[B]
[18] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[19] -1 0 0x0000b000 - 0x0000b07f (0x80) IX[B]
[20] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[21] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[22] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[23] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B](B)
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.7.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO, SIS550, SIS650/M650/651/740, SIS330(Xabre),
SIS660/661FX/M661FX/M661MX/741/741GX/M741/760/M760, SIS340
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset SIS650/M650/651/740 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe0800000 - 0xe08007ff (0x800) MX[B]
[6] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B]
[7] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[8] -1 0 0xe6000000 - 0xe6000fff (0x1000) MX[B]
[9] -1 0 0xe6800000 - 0xe6800fff (0x1000) MX[B]
[10] -1 0 0xe7000000 - 0xe7000fff (0x1000) MX[B]
[11] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[12] -1 0 0xe7800000 - 0xe781ffff (0x20000) MX[B](B)
[13] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[17] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[B]
[18] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[19] -1 0 0x0000b000 - 0x0000b07f (0x80) IX[B]
[20] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[21] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[22] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[23] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe0800000 - 0xe08007ff (0x800) MX[B]
[6] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B]
[7] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[8] -1 0 0xe6000000 - 0xe6000fff (0x1000) MX[B]
[9] -1 0 0xe6800000 - 0xe6800fff (0x1000) MX[B]
[10] -1 0 0xe7000000 - 0xe7000fff (0x1000) MX[B]
[11] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[12] -1 0 0xe7800000 - 0xe781ffff (0x20000) MX[B](B)
[13] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[20] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[B]
[21] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[22] -1 0 0x0000b000 - 0x0000b07f (0x80) IX[B]
[23] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[24] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[25] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[26] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B](B)
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) SIS(0): SiS driver (2004/08/20-1)
(II) SIS(0): Copyright (C) 2001-2004 Thomas Winischhofer <thomas@winischhofer.net> and others
(II) SIS(0): Compiled for XFree86 version 4.3.0.1
(II) SIS(0): See http://www.winischhofer.net/linuxsisvga.shtml for documentation and updates
(--) SIS(0): This adapter is primary display adapter
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xd480
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated IO registers at 0xD800
(**) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SIS(0): Video BIOS version "1.11.27a" found (old data layout)
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is enabled
(II) SIS(0): Using VRAM command queue, size 512k
(II) SIS(0): Hotkey display switching is enabled
(II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
(II) SIS(0): whether enabled or disabled. This is no driver bug.
(==) SIS(0): SiSCtrl utility interface is disabled
(==) SIS(0): DRI disabled
(II) SIS(0): Xv: Chroma key is of same format as video source
(--) SIS(0): DIMM0 is DDR SDRAM
(--) SIS(0): DIMM1 is not installed
(--) SIS(0): DIMM2 is not installed
(--) SIS(0): DIMM3 is not installed
(--) SIS(0): DRAM type: DDR SDRAM
(--) SIS(0): Memory clock: 133.634 MHz
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xF0000000
(--) SIS(0): MMIO registers at 0xE7800000 (size 128K)
(--) SIS(0): VideoRAM: 65536 KB
(II) SIS(0): Using 64960K of framebuffer memory
(--) SIS(0): Hardware supports one video overlay
(II) SIS(0): Identified Asus L3000D/L3500D, special timing applies
(--) SIS(0): Detected LVDS transmitter (External chip ID 3)
(--) SIS(0): Detected Chrontel 7019 TV encoder (ID 0x19; chip ID 3)
(--) SIS(0): Chrontel: No TV detected.
(--) SIS(0): No CRT1/VGA detected
(--) SIS(0): Detected LCD/plasma panel (1024x768, 1, non-exp., RGB18 [02c700])
(II) SIS(0): CRT1 gamma correction is enabled
(II) SIS(0): Separate Xv gamma correction for CRT1 is disabled
(--) SIS(0): Using Xv overlay by default on CRT2
(--) SIS(0): Memory bandwidth at 32 bpp is 534.536 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(--) SIS(0): CRT2 DDC probing failed
(II) SIS(0): Correcting bogus or missing CRT2 monitor HSync range
(II) SIS(0): Correcting bogus or missing CRT2 monitor VRefresh range
(==) SIS(0): Min pixel clock is 12 MHz
(--) SIS(0): Max pixel clock is 340 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): Generic Monitor: Using hsync range of 28.00-80.00 kHz
(II) SIS(0): Generic Monitor: Using vrefresh range of 56.00-71.00 Hz
(II) SIS(0): Clock range: 12.00 to 340.00 MHz
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "720x480" (unknown reason)
(II) SIS(0): Not using default mode "720x576" (unknown reason)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (unknown reason)
(II) SIS(0): Not using default mode "2048x1536" (unknown reason)
(II) SIS(0): Not using default mode "2048x1536" (unknown reason)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x480" (unknown reason)
(II) SIS(0): Not using default mode "800x480" (unknown reason)
(II) SIS(0): Not using default mode "800x480" (unknown reason)
(II) SIS(0): Not using default mode "1024x576" (unknown reason)
(II) SIS(0): Not using default mode "1024x576" (unknown reason)
(II) SIS(0): Not using default mode "1024x576" (unknown reason)
(II) SIS(0): Not using default mode "1280x720" (unknown reason)
(II) SIS(0): Not using default mode "1280x720" (unknown reason)
(II) SIS(0): Not using default mode "1280x720" (unknown reason)
(II) SIS(0): Not using default mode "1280x960" (unknown reason)
(II) SIS(0): Not using default mode "1280x960" (unknown reason)
(II) SIS(0): Not using default mode "1280x768" (unknown reason)
(II) SIS(0): Not using default mode "1400x1050" (unknown reason)
(II) SIS(0): Not using default mode "1400x1050" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "848x480" (unknown reason)
(II) SIS(0): Not using default mode "848x480" (unknown reason)
(II) SIS(0): Not using default mode "856x480" (unknown reason)
(II) SIS(0): Not using default mode "856x480" (unknown reason)
(II) SIS(0): Not using default mode "1360x768" (unknown reason)
(II) SIS(0): Not using default mode "768x576" (unknown reason)
(II) SIS(0): Not using default mode "1280x800" (unknown reason)
(II) SIS(0): Not using default mode "1680x1050" (unknown reason)
(II) SIS(0): Not using default mode "1920x1080" (unknown reason)
(II) SIS(0): Not using default mode "960x540" (unknown reason)
(II) SIS(0): Not using default mode "960x600" (unknown reason)
(II) SIS(0): Not using default mode "1024x768" (width too large for virtual size)
(II) SIS(0): Not using default mode "1024x768" (width too large for virtual size)
(--) SIS(0): Virtual size is 800x600 (pitch 800)
(**) SIS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SIS(0): Modeline "800x600" 39.97 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) SIS(0): *Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz
(II) SIS(0): Modeline "640x480" 25.06 640 656 752 800 480 490 492 525 -hsync -vsync
(**) SIS(0): Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz
(II) SIS(0): Modeline "800x600" 36.06 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) SIS(0): Default mode "640x400": 25.1 MHz, 31.6 kHz, 71.6 Hz
(II) SIS(0): Modeline "640x400" 25.06 640 656 752 792 400 413 415 442 -hsync +vsync
(**) SIS(0): Default mode "512x384": 32.6 MHz, 48.5 kHz, 60.1 Hz (D)
(II) SIS(0): Modeline "512x384" 32.57 512 528 592 672 384 385 388 403 doublescan -hsync -vsync
(**) SIS(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SIS(0): Modeline "400x300" 19.98 400 416 480 528 300 300 302 314 doublescan +hsync +vsync
(**) SIS(0): Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D)
(II) SIS(0): Modeline "320x240" 12.53 320 328 376 400 240 245 246 258 doublescan -hsync -vsync
(**) SIS(0): Default mode "320x200": 12.5 MHz, 31.3 kHz, 70.9 Hz (D)
(II) SIS(0): Modeline "320x200" 12.53 320 328 376 400 200 206 207 221 doublescan -hsync +vsync
(==) SIS(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) SIS(0): Accel enabled
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe7800000 - 0xe781ffff (0x20000) MX[B]
[1] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe0800000 - 0xe08007ff (0x800) MX[B]
[8] -1 0 0xe5000000 - 0xe5000fff (0x1000) MX[B]
[9] -1 0 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[10] -1 0 0xe6000000 - 0xe6000fff (0x1000) MX[B]
[11] -1 0 0xe6800000 - 0xe6800fff (0x1000) MX[B]
[12] -1 0 0xe7000000 - 0xe7000fff (0x1000) MX[B]
[13] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[14] -1 0 0xe7800000 - 0xe781ffff (0x20000) MX[B](B)
[15] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[19] 0 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[23] -1 0 0x0000a400 - 0x0000a47f (0x80) IX[B]
[24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[25] -1 0 0x0000b000 - 0x0000b07f (0x80) IX[B]
[26] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[27] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B]
[28] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[29] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B](B)
[30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[31] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 65472 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6325
(II) SIS(0): VESA VBE OEM Product Rev: 1.11.27a
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xd480
(==) SIS(0): Write-combining range (0xf0000000,0x4000000)
(II) SIS(0): Setting standard mode 0x63
(II) SIS(0): RENDER acceleration enabled
(II) SIS(0): Frame Buffer From (0,0) To (800,20786)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
32 8x8 color pattern slots
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(**) Option "dpms"
(**) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv by default on CRT2
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "PS/2"
(**) Configured Mouse: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "false"
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(**) Option "Protocol" "ImPS/2"
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Option "SendCoreEvents" "true"
(**) Generic Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Generic Mouse: ZAxisMapping: buttons 4 and 5
(**) Generic Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) Generic Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
SetClientVersion: 0 9
Reply to: