Problèmes de droits avec Gnomebaker...

[David BERCOT <david.bercot@wanadoo.fr>]

Bonjour,

J'ai souvent des problèmes de droits avec Gnomebaker (je suis obligé de passer en root pour graver !).
Voici le genre de message que j'obtiens :
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
cdrecord: Warning: Running on Linux-2.6.15-1-686-smp
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c	1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.

TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'debian-0.8debian2'.
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'MATSHITA'
Identifikation : 'DVD-RAM UJ-825S '
Revision       : 'D100'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012 
Profile: 0x001B 
Profile: 0x001A 
Profile: 0x0013 
Profile: 0x0014 
Profile: 0x0011 
Profile: 0x0010 
Profile: 0x000A (current)
Profile: 0x0009 
Profile: 0x0008 (current)
Profile: 0x0002 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO
Drive buf size : 1310720 = 1280 KB
FIFO size      : 4194304 = 4096 KB
cdrecord: Operation not permitted. Cannot send SCSI cmd via ioctl

Auriez-vous une piste pour moi ?

Merci d'avance.

David.

P.S. : avec K3B, je n'avais aucune de ces erreurs...