Re: Epson Perfection 1670

[Mario Lachance <mlachance1@aei.ca>]

De plus, la commande scanimage -L me renvoie:

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
maisondebian:/dev# sane-find-scanner

 # sane-find-scanner will now attempt to detect your scanner. If the
 # result is different from what you expected, first make sure your
 # scanner is powered up and properly connected to your computer.

 # No SCSI scanners found. If you expected something different, make 
sure that
 # you have loaded a SCSI driver for your SCSI adapter.
 # Also you need support for SCSI Generic (sg) in your operating system.
 # If using Linux, try "modprobe sg".

found USB scanner (vendor=0x04b8 [EPSON], product=0x011f [EPSON 
Scanner]) at libusb:001:005
 # Your USB scanner was (probably) detected. It may or may not be 
supported by
 # SANE. Try scanimage -L and read the backend's manpage.

 # Not checking for parallel port scanners.

 # Most Scanners connected to the parallel port or other proprietary ports
 # can't be detected by this program.


Je ne comprends pas Sane est supposé bien supporté ce matériel et il est 
reconnu ..... mais pas identifié.............


Merci de vos précisions......


Mario

Mario Lachance a écrit :

> Je continue le diagnostique:
>
> La commande cat /proc/bus/usb/drivers me renvoie:
> usbdevfs
>         hub
>  0- 15: usblp
> 48- 63: usbscanner
>
>
> La commande cat /proc/bus/usb/devices me renvoie:
> T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc= 17/900 us ( 2%), #Int=  1, #Iso=  0
> D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 0.00
> S:  Product=USB UHCI Root Hub
> S:  SerialNumber=ef80
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
> D:  Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
> P:  Vendor=04b8 ProdID=011f Rev= 1.07
> S:  Manufacturer=EPSON
> S:  Product=EPSON Scanner
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner
> E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=16ms
> T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  2 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=04b8 ProdID=0005 Rev= 1.00
> S:  Manufacturer=EPSON
> S:  Product=USB Printer
> S:  SerialNumber=L81010311011029190
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
> I:  If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
> E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
>
>
> Et sane ne détecte toujours pas de scanneur.
>
>
> Merci
>
> Mario Lachance a écrit :
>
> > Bonjour à tous,
> >
> > Je suis en Debain Sarge et la version du kernel est 2.4.27-2-586tsc. 
> > J'ai installé Sane pour faire fonctionner un scanneur Epson 
> > Perfection 1670. Et le tout refuse de fonctionner.
> >
> > J'aimerais savoir par quel bout commencer car j'ai essayé sur le site 
> > de sane et je ne trouve rien qui m'aide.
> >
> > Merci
> >
> > Mario