Hauppauge WinTV express
Bonjour,
N'ayant jamais de problème avec les cartes WinTV Express, je suis surpris que
le tuner, de la dernière que je viens d'acheter, ne soit pas reconnu avec un
kernel 2.4.25
Le référence de la carte est : 44809 rev E155
Voici ce que donne dmesg :
bttv: driver version 0.7.108 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:14.0, irq: 10, latency: 32, mmio: 0xde013000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Hauppauge eeprom: model=29440, tuner=<NULL> (-1), radio=no
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea642
0,tda8425,pic16c54 (PV951),ta8874z
i2c-core.o: driver generic i2c audio driver registered.
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc2
i2c-core.o: client [(tuner unset)] registered to adapter [bt848 #0](pos. 0).
tuner: tuner type not set
Une idée ?
Merci
@+
--
Thomas Labourdette
Reply to: