Re: problème USB
Effectivement avec acpi=off ça fonctionne mais je ne comprends pas le
pourquoi du comment???
Le Tue, 22 Feb 2005 02:39:06 +0100
Comendatore <commendatore@comendatore.net> a écrit:
> Bonjour,
> Essaie de démarrer ton PC en passant les paramètres suivants à ton
> noyau : noapic acpi=off
> Tiens moi au courant, merci.
>
> Comendatore.
>
> Le Mardi 22 Février 2005 01:43, Gaëtan PERRIER a écrit :
> > Salut,
> >
> > Depuis ce soir mon controleur USB de la carte mère est en rade et
> > j'ai des messages bizarres dans /var/log/messages:
> >
> > Feb 22 01:17:41 reveillon kernel: uhci_hcd 0000:00:07.2: VIA
> > Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> > Feb 22 01:17:41 reveillon kernel: uhci_hcd 0000:00:07.2: irq 11,
> > io base 0xd400
> > Feb 22 01:17:41 reveillon kernel: uhci_hcd 0000:00:07.2: new USB
> > bus registered, assigned bus number 3
> > Feb 22 01:17:41 reveillon kernel: uhci_hcd 0000:00:07.2: remove,
> > state 0
> > Feb 22 01:17:41 reveillon kernel: Uninitialised timer!
> > Feb 22 01:17:41 reveillon kernel: This is just a warning. Your
> > computer is OK
> > Feb 22 01:17:41 reveillon kernel: function=0x00000000, data=0x0
> > Feb 22 01:17:41 reveillon kernel: [check_timer_failed+97/112]
> > check_timer_failed+0x61/0x70
> > Feb 22 01:17:41 reveillon kernel: [del_timer+26/144]
> > del_timer+0x1a/0x90
> > Feb 22 01:17:41 reveillon kernel: [pg0+678774839/1069872128]
> > uhci_stop+0x17/0xa0 [uhci_hcd]
> > Feb 22 01:17:41 reveillon kernel: [pg0+678466733/1069872128]
> > usb_hcd_pci_remove+0x8d/0x190 [usbcore]
> > Feb 22 01:17:41 reveillon kernel: [pg0+678466081/1069872128]
> > usb_hcd_pci_probe+0x321/0x520 [usbcore]
> > Feb 22 01:17:41 reveillon kernel:
> > [pci_device_probe_static+82/112] pci_device_probe_static+0x52/0x70
> > Feb 22 01:17:41 reveillon kernel: [__pci_device_probe+59/80]
> > __pci_device_probe+0x3b/0x50
> > Feb 22 01:17:41 reveillon kernel: [pci_device_probe+44/80]
> > pci_device_probe+0x2c/0x50
> > Feb 22 01:17:41 reveillon kernel: [driver_probe_device+47/128]
> > driver_probe_device+0x2f/0x80
> > Feb 22 01:17:41 reveillon kernel: [driver_attach+89/144]
> > driver_attach+0x59/0x90
> > Feb 22 01:17:41 reveillon kernel: [bus_add_driver+152/208]
> > bus_add_driver+0x98/0xd0
> > Feb 22 01:17:41 reveillon kernel: [driver_register+47/64]
> > driver_register+0x2f/0x40
> > Feb 22 01:17:41 reveillon kernel: [pci_register_driver+98/128]
> > pci_register_driver+0x62/0x80
> > Feb 22 01:17:41 reveillon kernel: [pg0+676212932/1069872128]
> > uhci_hcd_init+0xc4/0x12d [uhci_hcd]
> > Feb 22 01:17:41 reveillon kernel: [sys_init_module+356/528]
> > sys_init_module+0x164/0x210
> > Feb 22 01:17:41 reveillon kernel: [sysenter_past_esp+82/117]
> > sysenter_past_esp+0x52/0x75
> > Feb 22 01:17:41 reveillon kernel: uhci_hcd 0000:00:07.2: USB bus 3
> > deregistered
> > Feb 22 01:17:41 reveillon kernel: uhci_hcd: probe of 0000:00:07.2
> > failed with error -110
> >
> >
> > C'est quoi le problème?
> >
> > Merci.
>
>
Reply to: