problème clé usb
Salut,
Il y a quelques temps, j'ai recompilé mon noyau avec les modules
nécessaires pour usb key et le hotplugin. J'ai installé les packages
nécessaires mais ça n'a jamais marché.
Ce soir, j'ai recommencé pour soumettre mon problème aux utilisateurs
debian.
J'ai entré mount -t vfat /dev/sda1 /media/usbkey et ma console se bloque
(Ctrl-z et autres n'y font rien) et donc je tue ma console. Mais ma clé,
je n'arrive toujours pas à la lire.
Le log du kernel donne ça:
Jan 29 01:15:44 hector kernel: ohci_hcd 0000:00:07.4: remote wakeup
Jan 29 01:15:44 hector kernel: usb 1-2: new full speed USB device using
address 2
Jan 29 01:15:45 hector kernel: SCSI subsystem initialized
Jan 29 01:15:45 hector kernel: Initializing USB Mass Storage driver...
Jan 29 01:15:45 hector kernel: scsi0 : SCSI emulation for USB Mass
Storage devices
Jan 29 01:15:45 hector kernel: Vendor: M-Sys Model:
DiskOnKey Rev: 4.31
Jan 29 01:15:45 hector kernel: Type:
Direct-Access ANSI SCSI revision: 02
Jan 29 01:15:45 hector kernel: SCSI device sda: 239872 512-byte hdwr
sectors (123 MB)
Jan 29 01:15:45 hector kernel: sda: assuming Write Enabled
Jan 29 01:15:45 hector kernel: sda: assuming drive cache: write through
Jan 29 01:15:45 hector kernel: sda:SCSI error : <0 0 0 0> return code =
0x70000
Jan 29 01:15:45 hector kernel: end_request: I/O error, dev sda, sector 0
Jan 29 01:15:45 hector kernel: Buffer I/O error on device sda, logical
block 0
Jan 29 01:15:45 hector kernel: SCSI error : <0 0 0 0> return code = 0x70000
Jan 29 01:15:45 hector kernel: end_request: I/O error, dev sda, sector 0
Jan 29 01:15:45 hector kernel: Buffer I/O error on device sda, logical
block 0
Jan 29 01:15:45 hector kernel: unable to read partition table
Jan 29 01:15:45 hector kernel: Attached scsi removable disk sda at
scsi0, channel 0, id 0, lun 0
Jan 29 01:15:45 hector kernel: USB Mass Storage device found at 2
Jan 29 01:15:45 hector kernel: usbcore: registered new driver usb-storage
Jan 29 01:15:45 hector kernel: USB Mass Storage support registered.
Jan 29 01:15:45 hector kernel: hub 1-0:1.0: port 2 disabled by hub
(EMI?), re-enabling...<6>usb 1-2: US$
Jan 29 01:15:45 hector kernel: usb 1-2: new full speed USB device using
address 3
Jan 29 01:15:45 hector kernel: scsi1 : SCSI emulation for USB Mass
Storage devices
Jan 29 01:15:45 hector kernel: Vendor: M-Sys Model:
DiskOnKey Rev: 4.31
Jan 29 01:15:45 hector kernel: Type:
Direct-Access ANSI SCSI revision: 02
Jan 29 01:15:45 hector kernel: SCSI device sda: 239872 512-byte hdwr
sectors (123 MB)
Jan 29 01:15:45 hector kernel: sda: assuming Write Enabled
Jan 29 01:15:45 hector kernel: sda: assuming drive cache: write through
Je n'ai pas d'idée.
Stevan Kanban
Reply to: