[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: init: Id "2" respawning too fast: disabled for 5 minutes



Encore un truc. lorsque je démarre en recovery mode,
je remarque k'il n'y a pas de /dev/ttyS ni ttyS1.

 --- Ar Jay <jayarftrd@yahoo.fr> a écrit : 
> mon /etc/inittab:
> 
> # /etc/inittab: init(8) configuration.
> # $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels
> Exp
> $
> 
> # The default runlevel.
> id:2:initdefault:
> 
> # Boot-time system configuration/initialization
> script.
> # This is run first except when booting in emergency
> (-b) mode.
> si::sysinit:/etc/init.d/rcS
> 
> # What to do in single-user mode.
> ~~:S:wait:/sbin/sulogin
> 
> # /etc/init.d executes the S and K scripts upon
> change
> # of runlevel.
> #
> # Runlevel 0 is halt.
> # Runlevel 1 is single-user.
> # Runlevels 2-5 are multi-user.
> # Runlevel 6 is reboot.
> 
> l0:0:wait:/etc/init.d/rc 0
> l1:1:wait:/etc/init.d/rc 1
> l2:2:wait:/etc/init.d/rc 2
> l3:3:wait:/etc/init.d/rc 3
> l4:4:wait:/etc/init.d/rc 4
> l5:5:wait:/etc/init.d/rc 5
> l6:6:wait:/etc/init.d/rc 6
> # Normally not reached, but fallthrough in case of
> emergency.
> z6:6:respawn:/sbin/sulogin
> 
> # What to do when CTRL-ALT-DEL is pressed.
> ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
> 
> # Action on special keypress (ALT-UpArrow).
> #kb::kbrequest:/bin/echo "Keyboard Request--edit
> /etc/inittab to let this work."
> 
> # What to do when the power fails/returns.
> pf::powerwait:/etc/init.d/powerfail start
> pn::powerfailnow:/etc/init.d/powerfail now
> po::powerokwait:/etc/init.d/powerfail stop
> 
> # /sbin/getty invocations for the runlevels.
> #
> # The "id" field MUST be the same as the last
> # characters of the device (after "tty").
> #
> # Format:
> #  <id>:<runlevels>:<action>:<process>
> #
> # Note that on most Debian systems tty7 is used by
> the
> X Window System,
> # so if you want to add more getty's go ahead but
> skip
> tty7 if you run X.
> #
> 1:2345:respawn:/sbin/getty 38400 tty1
> 2:23:respawn:/sbin/getty 38400 tty2
> 3:23:respawn:/sbin/getty 38400 tty3
> 4:23:respawn:/sbin/getty 38400 tty4
> 5:23:respawn:/sbin/getty 38400 tty5
> 6:23:respawn:/sbin/getty 38400 tty6
> 
> # Example how to put a getty on a serial line (for a
> terminal)
> #
> #T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
> #T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
> 
> # Example how to put a getty on a modem line.
> #
> #T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
> 
> voilà
> 
>  --- Michelle Konzack <linux4michelle@freenet.de> a
> écrit : 
> > Am 2005-01-13 16:16:10, schrieb Ar Jay:
> > > Salut,
> > 
> > > Starting periodic command scheduler : cron
> > > INIT: ID "2" respawning too fast : disabled for
> 5
> > > minutes.
> > 
> > <snip>
> > 
> > > INIT: ID "6" respawning too fast : disabled for
> 5
> > > minutes.
> > > INIT: No more processes left in this run level.
> > 
> > ...et le /etc/inittab ?
> > 
> > > des idées??
> > > merci
> > 
> > Greetings
> > Michelle
> > 
> > -- 
> > Linux-User #280138 with the Linux Counter,
> > http://counter.li.org/ 
> > Michelle Konzack   Apt. 917                  ICQ
> > #328449886
> >                    50, rue de Soultz         MSM
> > LinuxMichi
> > 0033/3/88452356    67100 Strasbourg/France   IRC
> > #Debian (irc.icq.com)
> > 
> 
> > ATTACHMENT part 2 application/pgp-signature
> name=signature.pgp
>  
> 
> 
> 	
> 
> 	
> 		
> Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace
> de stockage pour vos mails ! 
> Créez votre Yahoo! Mail sur
> http://fr.mail.yahoo.com/
> 
> 
> -- 
> Pensez à lire la FAQ de la liste avant de poser une
> question :
> http://wiki.debian.net/?DebianFrench
> 
> Pensez à rajouter le mot ``spam'' dans vos champs
> "From" et "Reply-To:"
> 
> To UNSUBSCRIBE, email to
> debian-user-french-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
> 
>  


	
	
		
Le nouveau Yahoo! Messenger est arrivé ! Découvrez toutes les nouveautés pour dialoguer instantanément avec vos amis. A télécharger gratuitement sur http://fr.messenger.yahoo.com



Reply to: