configuration d'un scanner hp 5300c

[Erwann PENCREACH <erwann.pencreach@laposte.net>]

bonjour,

j'ai des soucis de configuration avec mon scanner hp 5300 C

sane-find-scanner
me retourne

 # No SCSI scanners found. If you expected something different, make 
sure that
 # you have loaded a SCSI driver for your SCSI adapter.
 # Also you need support for SCSI Generic (sg) in your operating system.
 # If using Linux, try "modprobe sg".

found USB scanner (vendor=0x03f0, product=0x0701) at libusb:001:007
 # Your USB scanner was (probably) detected. It may or may not be 
supported by
 # SANE. Try scanimage -L and read the backend's manpage.
[...]

et
cat /proc/bus/usb/drivers
me retourne

        usbdevfs
        hub
        usb-storage
 0- 15: usblp
96-111: hiddev
        hid
48- 63: usbscanner




ce que j'ai fait:

sudo mknod /dev/usbscanner c 180 48
sudo chmod a+rw /dev/usbscanner
sudo chmod 666 /dev/usbscanner
sudo ln -s /dev/usbscanner /dev/scanner
sudo modprobe usbcore
sudo modprobe usb-uhci
sudo modprobe scanner
sudo mount -t usbdevfs /proc/bus/usb /proc/bus/usb



quelqu'un aurait il une idée

merci d'avance


Erwann