Re: Eth2

[Georges Roux <georges.roux@pacageek.org>]

Bon,bon,bon

J'ai bien prise usb et firewire, mais pas configuré pour faire du reseau 
avec.
Je n'ai pas de fichier /var/log/boot.log, mais

Voila lspci:

0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 
AGP] Host Bridge (rev 80)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:07.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge 
(non-transparent mode) (rev 11)
0000:00:0a.0 SCSI storage controller: Adaptec AHA-7850 (rev 01)
0000:00:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller (rev 61)
0000:00:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller (rev 61)
0000:00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 62)
0000:00:0b.3 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host 
Controller (rev 46)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. 
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 
[Rhine-II] (rev 74)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV20 
[GeForce3 Ti 200] (rev a3)
0000:02:0c.0 Multimedia video controller: Conexant Winfast TV2000 XP 
(rev 05)
0000:02:0d.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 
IEEE-1394a-2000 Controller (PHY/Link)

et voila ifconfig -a:
eth0      Lien encap:UNSPEC  HWaddr 
00-01-08-00-37-03-0E-A0-00-00-00-00-00-00-00-00 
         BROADCAST MULTICAST  MTU:1500  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 lg file transmission:1000
         RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

eth1      Lien encap:UNSPEC  HWaddr 
00-30-04-01-00-00-83-69-00-00-00-00-00-00-00-00 
         BROADCAST MULTICAST  MTU:1500  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 lg file transmission:1000
         RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

eth2      Lien encap:Ethernet  HWaddr 00:0C:76:B4:3A:9B 
         inet adr:192.168.123.119  Bcast:192.168.123.255  
Masque:255.255.255.0
         adr inet6: fe80::20c:76ff:feb4:3a9b/64 Scope:Lien
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:422 errors:0 dropped:0 overruns:0 frame:0
         TX packets:114 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 lg file transmission:1000
         RX bytes:44110 (43.0 KiB)  TX bytes:15912 (15.5 KiB)
         Interruption:23 Adresse de base:0xcc00

lo        Lien encap:Boucle locale 
         inet adr:127.0.0.1  Masque:255.0.0.0
         adr inet6: ::1/128 Scope:Hôte
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:310900 errors:0 dropped:0 overruns:0 frame:0
         TX packets:310900 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 lg file transmission:0
         RX bytes:39399396 (37.5 MiB)  TX bytes:39399396 (37.5 MiB)

sit0      Lien encap:IPv6-dans-IPv4 
         NOARP  MTU:1480  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 lg file transmission:0
         RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

j'ai du configurer avec eth2 pour faire via ssh

georges