Re: Lexmark Z11
Bonjour,
d'après www.linuxprinting.org
http://www.linuxprinting.org/show_printer.cgi?recnum=Lexmark-Z11
La z11 n'est que partiellement supportée sous GNU/Linux.
Mais dans le forum il y a un thread sur un nouveau driver
http://www.linuxprinting.org/forums.cgi?group=linuxprinting.lexmark.general
http://sourceforge.net/projects/lz11
en espérant que les liens t'aident
On Mon, 2004-08-23 at 01:24, Aurélien LP wrote:
> Bonjour,
>
> Je tente désespérement de faire marche ma Lexmark Z11
> sous Linux (Debian sarge), sans succès jusqu'ici... Je
> précise que j'ai essayé avec deux câbles différents,
> qui marchent à priori.
>
> Au niveau du noyau (2.4.27), j'ai activé PARPORT,
> PARPORT_PC, LP et PARPORT_1284 (pour le support
> ECP+EPP que j'ai activé dans le bios).
>
> Au niveau des paquets, voici ce qui est installé :
> ii foomatic-bin 3.0.1-20040506-1
> linuxprinting.org
> ii foomatic-db 20040705-1
> linuxprinting.org
> ii foomatic-db-engine 3.0.1-20040506-1
> linuxprinting.org
> ii foomatic-db-gimp-print 4.2.7-1
> linuxprinting.org
> ii foomatic-db-hpijs 1.5-20040621-1
> linuxprinting.org
> ii foomatic-filters 3.0.1-20040621-4
> linuxprinting.org
> ii foomatic-filters-ppds 20040506-1
> linuxprinting.org
> ii foo2zjs 20040210-2
> Support for printing
> ii cupsys 1.1.20final+rc1-3
> Common UNIX Printing
> ii cupsys-bsd 1.1.20final+rc1-3
> Common UNIX Printing
> ii cupsys-client 1.1.20final+rc1-3
> Common UNIX Printing
> ii cupsys-driver-gimpprint 4.2.7-1
> Gimp-Print printer
> ii cupsys-driver-gimpprint-data 4.2.7-1
> Gimp-Print printer
> ii libcupsys2 1.1.20final+rc1-3
> Common UNIX Printing
> ii libcupsys2-gnutls10 1.1.20final+rc1-3
> Common UNIX Printing
> ii cupsomatic-ppd 20040506-1
> linuxprinting.org
>
> L'interface Webmin de CUPS est accessible, j'ai pu
> configuré mon imprimante.
> Mais impossible d'imprimer la page de test. Ça donne :
> -----
> LexmarkZ11-11 Test Page 15k Abandonné à
> -----
> «lpr <fichier>» ne renvoie aucune erreur mais ne fait
> rien
> «cat <fichier> > /dev/lp0», idem
> Rien ne sort ! L'imprimante ne frémit même pas...
> J'ai tenté un «fc-cache -f», rien à faire.
>
> J'ai monté LogLevel à debug et vous avez à la fin du
> message une tentative
> complète d'impression trouvée dans
> /var/log/cups/error_log.
>
> Je remarque plusieurs choses de travers :
> -----
> D [21/Aug/2004:16:38:01 +0200] [Job 15] perl: warning:
> Setting locale failed.
> D [21/Aug/2004:16:38:01 +0200] [Job 15] perl: warning:
> Please check that your
> locale settings:
> D [21/Aug/2004:16:38:01 +0200] [Job 15] LANGUAGE =
> (unset),
> D [21/Aug/2004:16:38:01 +0200] [Job 15] LC_ALL =
> (unset),
> D [21/Aug/2004:16:38:01 +0200] [Job 15] LANG = "fr"
> D [21/Aug/2004:16:38:01 +0200] [Job 15] are supported
> and installed on your
> system.
> D [21/Aug/2004:16:38:01 +0200] [Job 15] perl: warning:
> Falling back to the
> standard locale ("C").
> -----
> Pourtant le paquet locales est correctement configuré.
> J'ai vérifié, c'est
> bon...
>
> Il y a surtout ça :
> -----
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Process dying
> with "The renderer command
> line returned an unrecognized error code 16777215.",
> exit stat: 1
> D [21/Aug/2004:16:38:02 +0200] [Job 15] The renderer
> command line returned an
> unrecognized error code 16777215.
> D [21/Aug/2004:16:38:02 +0200] [Job 15] tail process
> done writing data to
> STDOUT
> D [21/Aug/2004:16:38:02 +0200] [Job 15] KID4 finished
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Renderer
> process finished
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Killing
> process 3212 (KID3)
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Process dying
> with "Error closing
> renderer", exit stat: 1
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Error closing
> renderer
> E [21/Aug/2004:16:38:02 +0200] PID 3208 stopped with
> status 1!
> -----
> J'ai fait une recherche sur google, apparement c'est
> une erreur liée à foo2zjs,
> pourtant il semble correctement installé chez moi...
>
> Si vous avez la moindre idée, n'hésitez pas... Je suis
> preneur...
> Merci d'avance ;-)
>
> Voici le résultat de quelques commandes en vrac :
>
> -----
> aurelien@theodule|~% lpc stat
>
> 12:53
> LexmarkZ11:
> printer is on device 'parallel' speed -1
> queuing is enabled
> printing is enabled
> no entries
> -----
>
> -----
> aurelien@theodule|~% cat /etc/printcap
>
> 13:00
> lp|Generic dot-matrix printer entry:\
> :lp=/dev/lp0:\
> :sd=/var/spool/lpd/lp:\
> :af=/var/log/lp-acct:\
> :lf=/var/log/lp-errs:\
> :pl#66:\
> :pw#80:\
> :pc#150:\
> :mx#0:\
> :sh:
> -----
>
> Et voici les messages complets dus à une tentative
> d'impression :
> -----
> I [21/Aug/2004:16:37:55 +0200] Listening to 0:631
> D [21/Aug/2004:16:37:55 +0200] AddLocation: added
> location 'CUPS_INTERNAL_BROWSE_ACL'
> D [21/Aug/2004:16:37:55 +0200] DenyIP:
> CUPS_INTERNAL_BROWSE_ACL deny 00000000/00000000
> D [21/Aug/2004:16:37:55 +0200] AddLocation: added
> location '/'
> D [21/Aug/2004:16:37:55 +0200] DenyIP: / deny
> 00000000/00000000
> D [21/Aug/2004:16:37:55 +0200] AllowIP: / allow
> 7f000001/ffffffff
> D [21/Aug/2004:16:37:55 +0200] AddLocation: added
> location '/admin'
> D [21/Aug/2004:16:37:55 +0200] DenyIP: /admin deny
> 00000000/00000000
> D [21/Aug/2004:16:37:55 +0200] AllowIP: /admin allow
> 7f000001/ffffffff
> I [21/Aug/2004:16:37:55 +0200] Loaded configuration
> file "/etc/cups/cupsd.conf"
> I [21/Aug/2004:16:37:55 +0200] Configured for up to
> 100 clients.
> I [21/Aug/2004:16:37:55 +0200] Allowing up to 100
> client connections per host.
> I [21/Aug/2004:16:37:55 +0200] Full reload is
> required.
> D [21/Aug/2004:16:37:55 +0200] LoadAllPrinters:
> Loading printer LexmarkZ11...
> D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added
> device "parallel:/dev/lp0"...
> D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added
> device "ipp"...
> D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added
> device "lpd"...
> D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added
> device "socket"...
> D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added
> device "http"...
> D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added
> device "canon:/dev/lp0"...
> D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added
> device "epson:/dev/lp0"...
> D [21/Aug/2004:16:37:55 +0200] LoadDevices: Added
> device "ptal"...
> I [21/Aug/2004:16:37:55 +0200] LoadPPDs: Read
> "/etc/cups/ppds.dat", 2312 PPDs...
> I [21/Aug/2004:16:37:56 +0200] LoadPPDs: No new or
> changed PPDs...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Scanning
> /var/spool/cups...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 1...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 2...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 3...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 4...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 5...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 6...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 7...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 8...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 9...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 10...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 11...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 12...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 13...
> D [21/Aug/2004:16:37:56 +0200] LoadAllJobs: Loading
> attributes for job 14...
> I [21/Aug/2004:16:37:56 +0200] Full reload complete.
> D [21/Aug/2004:16:37:56 +0200] StartListening:
> NumListeners=1
> D [21/Aug/2004:16:37:56 +0200] StartListening:
> address=00000000 port=631
> D [21/Aug/2004:16:37:56 +0200] ResumeListening:
> setting input bits...
> D [21/Aug/2004:16:37:58 +0200] AcceptClient: 4 from
> localhost:631.
> D [21/Aug/2004:16:37:58 +0200] ReadClient: 4 GET
> /printers HTTP/1.1
> D [21/Aug/2004:16:37:58 +0200] CGI
> /usr/lib/cups/cgi-bin/printers.cgi started - PID =
> 3204
> I [21/Aug/2004:16:37:58 +0200] Started
> "/usr/lib/cups/cgi-bin/printers.cgi" (pid=3204)
> D [21/Aug/2004:16:37:58 +0200] SendCommand: 4 file=6
> D [21/Aug/2004:16:37:59 +0200] AcceptClient: 7 from
> localhost:631.
> D [21/Aug/2004:16:37:59 +0200] ReadClient: 7 POST /
> HTTP/1.1
> D [21/Aug/2004:16:37:59 +0200] ProcessIPPRequest: 7
> status_code=1
> D [21/Aug/2004:16:37:59 +0200] ReadClient: 7 POST /
> HTTP/1.1
> D [21/Aug/2004:16:37:59 +0200] ProcessIPPRequest: 7
> status_code=1
> D [21/Aug/2004:16:37:59 +0200] CloseClient: 7
> D [21/Aug/2004:16:38:01 +0200] ReadClient: 4 GET
> /printers/LexmarkZ11?op=print-test-page HTTP/1.1
> D [21/Aug/2004:16:38:01 +0200] CGI
> /usr/lib/cups/cgi-bin/printers.cgi started - PID =
> 3206
> I [21/Aug/2004:16:38:01 +0200] Started
> "/usr/lib/cups/cgi-bin/printers.cgi" (pid=3206)
> D [21/Aug/2004:16:38:01 +0200] SendCommand: 4 file=7
> D [21/Aug/2004:16:38:01 +0200] AcceptClient: 6 from
> localhost:631.
> D [21/Aug/2004:16:38:01 +0200] ReadClient: 6 POST
> /printers/LexmarkZ11 HTTP/1.1
> D [21/Aug/2004:16:38:01 +0200] print_job: request file
> type is application/postscript.
> D [21/Aug/2004:16:38:01 +0200] check_quotas:
> requesting-user-name = ''
> D [21/Aug/2004:16:38:01 +0200] print_job:
> requesting-user-name = ''
> D [21/Aug/2004:16:38:01 +0200] Adding default
> job-sheets values "none,none"...
> I [21/Aug/2004:16:38:01 +0200] Adding start banner
> page "none" to job 15.
> I [21/Aug/2004:16:38:01 +0200] Adding end banner page
> "none" to job 15.
> I [21/Aug/2004:16:38:01 +0200] Job 15 queued on
> 'LexmarkZ11' by ''.
> D [21/Aug/2004:16:38:01 +0200] Job 15 hold_until = 0
> D [21/Aug/2004:16:38:01 +0200] StartJob(15, 0x80b7960)
> D [21/Aug/2004:16:38:01 +0200] StartJob() id = 15,
> file = 0/1
> D [21/Aug/2004:16:38:01 +0200] job-sheets=none,none
> D [21/Aug/2004:16:38:01 +0200] banner_page = 0
> D [21/Aug/2004:16:38:01 +0200] StartJob: argv =
> "LexmarkZ11","15","","Test
> Page","1","","/var/spool/cups/d00015-001"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[1]="SOFTWARE=CUPS/1.1"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[2]="USER=root"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[3]="CHARSET=iso-8859-15"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[4]="LANG=fr"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[5]="TZ=Europe/Paris"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[6]="PPD=/etc/cups/ppd/LexmarkZ11.ppd"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[7]="CUPS_SERVERROOT=/etc/cups"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[8]="RIP_MAX_CACHE=8m"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[9]="TMPDIR=/var/spool/cups/tmp"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[10]="CONTENT_TYPE=application/postscript"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[11]="DEVICE_URI=parallel:/dev/lp0"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[12]="PRINTER=LexmarkZ11"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[13]="CUPS_DATADIR=/usr/share/cups"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[14]="CUPS_FONTPATH=/usr/share/cups/fonts"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[15]="CUPS_SERVER=localhost"
> D [21/Aug/2004:16:38:01 +0200] StartJob:
> envp[16]="IPP_PORT=631"
> D [21/Aug/2004:16:38:01 +0200] StartJob: statusfds = [
> 8 9 ]
> D [21/Aug/2004:16:38:01 +0200] StartJob: filterfds[1]
> = [ 10 -1 ]
> D [21/Aug/2004:16:38:01 +0200] StartJob: filter =
> "/usr/lib/cups/filter/pstops"
> D [21/Aug/2004:16:38:01 +0200] StartJob: filterfds[0]
> = [ 11 12 ]
> D [21/Aug/2004:16:38:01 +0200]
> start_process("/usr/lib/cups/filter/pstops",
> 0xbfff0080, 0xbffef3f0, 10, 12, 9)
> I [21/Aug/2004:16:38:01 +0200] Started filter
> /usr/lib/cups/filter/pstops (PID 3207) for job 15.
> D [21/Aug/2004:16:38:01 +0200] StartJob: filter =
> "/usr/lib/cups/filter/foomatic-rip"
> D [21/Aug/2004:16:38:01 +0200] StartJob: filterfds[1]
> = [ 10 13 ]
> D [21/Aug/2004:16:38:01 +0200]
> start_process("/usr/lib/cups/filter/foomatic-rip",
> 0xbfff0080, 0xbffef3f0, 11, 13, 9)
> I [21/Aug/2004:16:38:01 +0200] Started filter
> /usr/lib/cups/filter/foomatic-rip (PID 3208) for job
> 15.
> D [21/Aug/2004:16:38:01 +0200] StartJob: backend =
> "/usr/lib/cups/backend/parallel"
> D [21/Aug/2004:16:38:01 +0200] StartJob: filterfds[0]
> = [ -1 11 ]
> D [21/Aug/2004:16:38:01 +0200]
> start_process("/usr/lib/cups/backend/parallel",
> 0xbfff0080, 0xbffef3f0, 10, 11, 9)
> I [21/Aug/2004:16:38:01 +0200] Started backend
> /usr/lib/cups/backend/parallel (PID 3209) for job 15.
> D [21/Aug/2004:16:38:01 +0200] ProcessIPPRequest: 6
> status_code=0
> D [21/Aug/2004:16:38:01 +0200] [Job 15] Page =
> 595x842; 0,0 to 595,842
> D [21/Aug/2004:16:38:01 +0200] [Job 15] slowcollate=0,
> slowduplex=0, sloworder=0
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0
> %%BoundingBox: 0 0 612 792
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%Pages: 1
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0
> %%LanguageLevel: 1
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0
> %%DocumentData: Clean7Bit
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0
> %%DocumentSuppliedResources: procset testprint/1.0
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0
> %%DocumentNeededResources: font Helvetica
> Helvetica-Bold Times-Roman
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%Creator:
> Michael Sweet, Easy Software Products
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0
> %%CreationDate: May 11, 1999
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%Title:
> Test Page
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0
> %%EndComments
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0
> %%BeginProlog
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0
> %%BeginResource procset testprint 1.1 0
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0
> %%EndResource
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%EndProlog
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%Page: 1 1
> D [21/Aug/2004:16:38:01 +0200] [Job 15] perl: warning:
> Setting locale failed.
> D [21/Aug/2004:16:38:01 +0200] [Job 15] perl: warning:
> Please check that your locale settings:
> D [21/Aug/2004:16:38:01 +0200] [Job 15] LANGUAGE =
> (unset),
> D [21/Aug/2004:16:38:01 +0200] [Job 15] LC_ALL =
> (unset),
> D [21/Aug/2004:16:38:01 +0200] [Job 15] LANG = "fr"
> D [21/Aug/2004:16:38:01 +0200] [Job 15] are supported
> and installed on your system.
> D [21/Aug/2004:16:38:01 +0200] [Job 15] perl: warning:
> Falling back to the standard locale ("C").
> D [21/Aug/2004:16:38:01 +0200] CloseClient: 6
> D [21/Aug/2004:16:38:01 +0200] [Job 15] 0 %%Page: 1 1
> D [21/Aug/2004:16:38:01 +0200] [Job 15] pw = 595.0, pl
> = 842.0
> D [21/Aug/2004:16:38:01 +0200] [Job 15] PageLeft =
> 0.0, PageRight = 595.0
> D [21/Aug/2004:16:38:01 +0200] [Job 15] PageTop =
> 842.0, PageBottom = 0.0
> D [21/Aug/2004:16:38:01 +0200] [Job 15] PageWidth =
> 595.0, PageLength = 842.0
> D [21/Aug/2004:16:38:02 +0200] [Job 15] foomatic-rip
> version $Revision: 3.43.2.5 $ running...
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Parsing PPD
> file ...
> D [21/Aug/2004:16:38:02 +0200] [Job 15] *cupsFilter:
> "application/vnd.cups-postscript 0 foomatic-rip"
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option
> ColorSpace
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option
> PageSize
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option
> PageRegion
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option
> ImageableArea
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option
> PaperDimension
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option
> InkType
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option
> InkSaving
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option
> ResX
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option
> ResY
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Added option
> Font
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Parameter
> Summary
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> -----------------
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Spooler: cups
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Printer:
> LexmarkZ11
> D [21/Aug/2004:16:38:02 +0200] [Job 15] PPD file:
> /etc/cups/ppd/LexmarkZ11.ppd
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Printer model:
> Lexmark Z11 Foomatic/lz11 (recommended)
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Job title:
> Test Page
> D [21/Aug/2004:16:38:02 +0200] [Job 15] File(s) to be
> printed:
> D [21/Aug/2004:16:38:02 +0200] [Job 15] <STDIN>
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> ================================================
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15] File: <STDIN>
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> ================================================
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Reading
> PostScript input ...
> D [21/Aug/2004:16:38:02 +0200] [Job 15] --> This
> document is DSC-conforming!
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15] -----------
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found:
> %%BeginProlog
> D [21/Aug/2004:16:38:02 +0200] [Job 15] 0 %%EOF
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Saw EOF!
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found:
> %%EndProlog
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15] -----------
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found:
> %%BeginSetup
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Inserting
> PostScript code for CUPS' page accounting
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found:
> %%BeginFeature: *PageSize A4
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Option:
> PageSize=A4 --> Setting option
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%
> FoomaticRIPOptionSetting: PageSize=A4
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Option:
> PageSize=A4 --> Setting option
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found:
> %%BeginFeature: *InkType Black
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Option:
> InkType=Black --> Setting option
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%
> FoomaticRIPOptionSetting: InkType=Black
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Option:
> InkType=Black --> Setting option
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found:
> %%BeginFeature: *InkSaving 1
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Option:
> InkSaving=1 --> Setting option
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%
> FoomaticRIPOptionSetting: InkSaving=1
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Option:
> InkSaving=1 --> Setting option
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found:
> %%BeginFeature: *ResX 582
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Option:
> ResX=582 --> Setting option
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%
> FoomaticRIPOptionSetting: ResX=582
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Option:
> ResX=582 --> Setting option
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found:
> %%BeginFeature: *ResY 582
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Option:
> ResY=582 --> Setting option
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found: %%
> FoomaticRIPOptionSetting: ResY=582
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Option:
> ResY=582 --> Setting option
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found:
> %%EndSetup
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15] -----------
> D [21/Aug/2004:16:38:02 +0200] [Job 15] New page: 1 1
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Inserting
> option code into "PageSetup" section.
> D [21/Aug/2004:16:38:02 +0200] [Job 15] No page header
> or page header not DSC-conforming
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Stopping
> search for page header options
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Found:
> D [21/Aug/2004:16:38:02 +0200] [Job 15] pageHeight sub
> % Move down...
> D [21/Aug/2004:16:38:02 +0200] [Job 15] --> Output
> goes directly to the renderer now.
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Starting
> renderer
> D [21/Aug/2004:16:38:02 +0200] [Job 15] renderer PID
> kid4=3213
> D [21/Aug/2004:16:38:02 +0200] [Job 15] renderer
> command: lz11.foomatic --papersize=a4 --color=0
> --inksaving=1 --resx=582 --resy=582
> D [21/Aug/2004:16:38:02 +0200] [Job 15] JCL: <job
> data>
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15] renderer
> return value: 16777215
> D [21/Aug/2004:16:38:02 +0200] [Job 15] renderer
> received signal: 16777215
> D [21/Aug/2004:16:38:02 +0200] [Job 15]
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Closing
> renderer
> D [21/Aug/2004:16:38:02 +0200] [Job 15] KID3 exited
> with status 1
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Renderer exit
> stat: 1
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Process dying
> with "The renderer command line returned an
> unrecognized error code 16777215.", exit stat: 1
> D [21/Aug/2004:16:38:02 +0200] [Job 15] The renderer
> command line returned an unrecognized error code
> 16777215.
> D [21/Aug/2004:16:38:02 +0200] [Job 15] tail process
> done writing data to STDOUT
> D [21/Aug/2004:16:38:02 +0200] [Job 15] KID4 finished
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Renderer
> process finished
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Killing
> process 3212 (KID3)
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Process dying
> with "Error closing renderer", exit stat: 1
> D [21/Aug/2004:16:38:02 +0200] [Job 15] Error closing
> renderer
> E [21/Aug/2004:16:38:02 +0200] PID 3208 stopped with
> status 1!
> D [21/Aug/2004:16:38:02 +0200] UpdateJob: job 15, file
> 0 is complete.
> D [21/Aug/2004:16:38:02 +0200] CancelJob: id = 15
> D [21/Aug/2004:16:38:02 +0200] StopJob: id = 15, force
> = 0
> D [21/Aug/2004:16:38:02 +0200] StopJob: printer state
> is 3
> D [21/Aug/2004:16:38:03 +0200] ReadClient: 4 GET /jobs
> HTTP/1.1
> D [21/Aug/2004:16:38:03 +0200] CGI
> /usr/lib/cups/cgi-bin/jobs.cgi started - PID = 3215
> I [21/Aug/2004:16:38:03 +0200] Started
> "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=3215)
> D [21/Aug/2004:16:38:03 +0200] SendCommand: 4 file=7
> D [21/Aug/2004:16:38:03 +0200] AcceptClient: 6 from
> localhost:631.
> D [21/Aug/2004:16:38:03 +0200] ReadClient: 6 POST /
> HTTP/1.1
> D [21/Aug/2004:16:38:03 +0200] ProcessIPPRequest: 6
> status_code=1
> D [21/Aug/2004:16:38:03 +0200] CloseClient: 6
> -----
>
>
>
>
>
>
> Vous manquez despace pour stocker vos mails ?
> Yahoo! Mail vous offre GRATUITEMENT 100 Mo !
> Créez votre Yahoo! Mail sur http://fr.benefits.yahoo.com/
>
> Le nouveau Yahoo! Messenger est arrivé ! Découvrez toutes les nouveautés pour dialoguer instantanément avec vos amis. A télécharger gratuitement sur http://fr.messenger.yahoo.com
>
Reply to: