Re: Probleme install cles USB 256Mo
C'est justement la ou peut etre le probleme !
Il est vivement deconseille de partager les interruptions car il peut etre
probable qu'un des drivers partage mal les interruptions (essaye de devalider
le reseau,puis le son par exemple) et je pense que tu devrais arriver au
resultat attendu !
Tu peux essayer de forcer un remapping des IT en allant dans le bios et en
forcant un rescan de tes periphs pci
Le Vendredi 4 Juillet 2003 11:05, Badier Vincent a écrit :
> --- stephane ancelot <sancelot@free.fr> a écrit : >
> Nous avons fait l'essai sur 2 postes differents avec
>
> > 2 clefs differentes mais
> > pas de pb .
> >
> > Cependant, je pense que le point de montage peut
> > etre sda ou sdb en fonction
> > de la config hard du port usb mais reste figee pour
> > une machine donnee
> >
> > Une information importante est la version du noyau
> > utilisee : pas de probleme
> > apparent avec 2.4.20/2.4.21
> >
> > Une autre info importante est la version du
> > protocole de la cle usb 2.0 /1.
> >
> > Le fait de valider USB introduit une nouvelle IRQ
> > dans le systeme , peut etre
> > qu'un conflit d'IRQ est apparent et donc un
> > dysfonctionnement du periph usb .
> > Verifier dans le noyau les parametres pour l'APIC
> > egalement que je conseille
> > de valider pour un partage correct des IT.
> > Bye
> > Steph
>
> Désolé pour le post précédent.
>
> Voici la conf APIC et les qq test effectués :
>
> mobile:/home/vb/src/linux-2.4.21# grep -i apic .config
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_UP_APIC=y
> # CONFIG_X86_UP_IOAPIC is not set
> CONFIG_X86_LOCAL_APIC=y
>
> mobile:/home/vb/src/linux-2.4.21# irqtune -n -o
> irqtune: simulating IRQ priority of 0/8
> tblread: SYNTAX 'as Instruments PCI1225 (#2),
> usb-uhci, eth0'
> tblread: SYNTAX 'LOC: 0 '
> tblread: SYNTAX 'ERR: 0'
> I00/P00: 5679387 XT-PIC timer
> I01/P01: 10333 XT-PIC keyboard
> I02/P02: 0 XT-PIC cascade
> I11/P05: 725417 XT-PIC ESS Maestro 2E,
> Texas Instruments
> PCI1225, Tex
> I12/P06: 35228 XT-PIC PS/2 Mouse
> I14/P08: 58922 XT-PIC ide0
> irqtune: complete
>
> mobile:/home/vb/src/linux-2.4.21# irqtune -n -e
> irqtune: version is 0.6
> irqtune: kernel version 2.4.21
> probe: irqtune must be invoked via the full path -- OK
> probe: /sbin in $PATH -- YES
> probe: insmod found in $PATH (/sbin) -- OK
> probe: insmod simple execution -- OK
> probe: insmod has version (2.4.15) -- YES
> probe: rmmod found in insmod directory -- OK
> probe: insmod version supports command line options --
> OK
> probe: insmod version (2.4.15) compatible with kernel
> version (2.4.21) -- OK
> probe: insmod version should be 2.1.34 (or better) --
> OK
> probe: insmod and kernel compatible with
> CONFIG_MODVERSIONS -- OK
> probe: irqtune_mod loading will be tried -- OK
> probe: kernel version irqtune built under (1.0.0)
> matches current system -- NO
> probe: kernel IRQ handling is compatible -- OK
> probe: kernel has module support (CONFIG_MODULES) --
> OK
> probe: kernel has symbols -- OK
> probe: kernel is using versions (CONFIG_MODVERSIONS)
> -- YES
> probe: kernel symbols are checksummed
> (CONFIG_MODVERSIONS) -- YES
> probe: kernel has /proc/interrupts -- OK
> irqtune: simulating IRQ priority of 3/14
> tblread: SYNTAX 'as Instruments PCI1225 (#2),
> usb-uhci, eth0'
> tblread: SYNTAX 'LOC: 0 '
> tblread: SYNTAX 'ERR: 0'
> I00/P05: 5679897 XT-PIC timer
> I01/P06: 10343 XT-PIC keyboard
> I02/P07: 0 XT-PIC cascade
> I11/P12: 725417 XT-PIC ESS Maestro 2E,
> Texas Instruments
> PCI1225, Tex
> I12/P13: 35228 XT-PIC PS/2 Mouse
> I14/P07: 58922 XT-PIC ide0
> irqtune: complete
>
> mobile:/home/vb/src/linux-2.4.21# mount | grep sda
> mobile:/home/vb/src/linux-2.4.21# mount /dev/sda1
> mobile:/home/vb/src/linux-2.4.21# ls -al /mnt/usb/
> total 8709
> drwxr-xr-x 3 root root 16384 Jan 1
> 1970 .
> drwxr-xr-x 4 root root 1024 Jul 4
> 10:25 ..
> -rwxr-xr-x 1 root root 24654 Jul 3
> 17:44 .config
> drwxr-xr-x 3 root root 1024 Jul 2
> 10:20 Windows
> -rwxr-xr-x 1 root root 10094 Jul 2
> 08:47 hello_exploit.c
> -rwxr-xr-x 1 root root 8862944 Jul 2
> 15:57
> samba-3.0.0beta2.tar.gz
>
> mobile:/home/vb/src/linux-2.4.21# rm -f
> /mnt/usb/samba-3.0.0beta2.tar.gz
> mobile:/home/vb/src/linux-2.4.21# sync
> mobile:/home/vb/src/linux-2.4.21# ls -al /mnt/usb/
> total 53
> drwxr-xr-x 3 root root 16384 Jul 4
> 10:35 .
> drwxr-xr-x 4 root root 1024 Jul 4
> 10:25 ..
> -rwxr-xr-x 1 root root 24654 Jul 3
> 17:44 .config
> drwxr-xr-x 3 root root 1024 Jul 2
> 10:20 Windows
> -rwxr-xr-x 1 root root 10094 Jul 2
> 08:47 hello_exploit.c
>
> mobile:/home/vb/src/linux-2.4.21# umount /dev/sda1;
> mount /dev/sda1; ls -al
> /mnt/usb/
> total 8709
> drwxr-xr-x 3 root root 16384 Jan 1
> 1970 .
> drwxr-xr-x 4 root root 1024 Jul 4
> 10:25 ..
> -rwxr-xr-x 1 root root 24654 Jul 3
> 17:44 .config
> drwxr-xr-x 3 root root 1024 Jul 2
> 10:20 Windows
> -rwxr-xr-x 1 root root 10094 Jul 2
> 08:47 hello_exploit.c
> -rwxr-xr-x 1 root root 8862944 Jul 2
> 15:57
> samba-3.0.0beta2.tar.gz
>
> mobile:/home/vb/src/linux-2.4.21#cat /proc/interrupts
> CPU0
> 0: 5719051 XT-PIC timer
> 1: 11307 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 11: 749209 XT-PIC ESS Maestro 2E, Texas
> Instruments PCI1225,
> Texas Instruments PCI1225 (#2), usb-uhci, eth0
> 12: 44474 XT-PIC PS/2 Mouse
> 14: 60036 XT-PIC ide0
> NMI: 0
> LOC: 0
> ERR: 0
> mobile:/home/vb/src/linux-2.4.21#
>
> On vois bien l'irq 11 partagée entre le son, la NIC
> l'usb, ect..
>
> Je ne vois toujours pas pourquoi un tel comportement
> (fichier non présent dans un ls et présent à nouveau
> après démontage/remontage).
>
> Vincent
>
> ___________________________________________________________
> Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français !
> Yahoo! Mail : http://fr.mail.yahoo.com
Reply to: