Re: Impossible de lancer startx
As-tu fais la config de ton serveur X? (X --configure)
a premiere vue, il ne peut choisir de définition par défaut (800x600, ...)
Si je fait X -configure voilà ce que j'obtiens:
emeraude:~# X -configure
warning: process set to nice value 0 instead of -10 as requested
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Mar 6 15:52:47 2003
(--) using VT number 7
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) ATI Rage 128 RF rev 0, Mem @ 0xd8000000/26, 0xdfefc000/14,
I/O @ 0x6800/8, BIOS @ 0xdfec0000/17
List of video drivers:
atimisc
r128
radeon
mga
glint
nv
tga
s3virge
sis
rendition
neomagic
i740
tdfx
savage
cirrus
vmware
tseng
trident
chips
apm
glide
fbdev
i128
ati
i810
imstt
ark
cyrix
siliconmotion
vesa
vga
v4l
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 6.3.6
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 4.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 4.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o
(II) Module glint: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/tga_drv.o
(II) Module tga: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="Kevin Brosius"
compiled for 4.1.0.1, module version = 1.6.13
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.6.0
(II) Loading /usr/X11R6/lib/modules/drivers/rendition_drv.o
(II) Module rendition: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 4.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/neomagic_drv.o
(II) Module neomagic: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/i740_drv.o
(II) Module i740: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o
(II) Module tdfx: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
(II) Module savage: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.16
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o
(II) Module cirrus: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/vmware_drv.o
(II) Module vmware: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 10.4.0
(II) Loading /usr/X11R6/lib/modules/drivers/tseng_drv.o
(II) Module tseng: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/trident_drv.o
(II) Module trident: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o
(II) Module chips: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/apm_drv.o
(II) Module apm: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/glide_drv.o
(II) Module glide: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.1
(WW) Warning, couldn't open module glide2x
(EE) Glide driver:
Could not load the shared library file for Glide: "libglide2x.so"!
You need to have Glide installed to run the glide driver for XFree86.
Also, you need to tell XFree86 where the libglide2x.so file is placed
by making a soft link in the /usr/X11R6/lib/modules directory that points
to the libglide2x.so file. For example (if your libglide2x.so file is in
/usr/lib):
# ln -s /usr/lib/libglide2x.so /usr/X11R6/lib/modules
(II) Unloading /usr/X11R6/lib/modules/drivers/glide_drv.o
(EE) Failed to load module "glide" (submodule could not be loaded, 2)
(II) Loading /usr/X11R6/lib/modules/drivers/fbdev_drv.o
(II) Module fbdev: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/drivers/i128_drv.o
(II) Module i128: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 6.3.6
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/imstt_drv.o
(II) Module imstt: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/ark_drv.o
(II) Module ark: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.5.0
(II) Loading /usr/X11R6/lib/modules/drivers/cyrix_drv.o
(II) Module cyrix: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/siliconmotion_drv.o
(II) Module siliconmotion: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.2.2
(II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.o
(II) Module vesa: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 4.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.0.1
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_laguna.o
(II) Module cirrus_laguna: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_alpine.o
(II) Module cirrus_alpine: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(--) VMware Guest X Server 10.4.0 - build=
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI),
ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE (AGP)
(II) VESA: driver for VESA chipsets: vesa
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) v4l driver for Video4Linux
(++) Using config file: "/root/XF86Config.new"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) Chipset ATI Rage 128 RF (AGP) found
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(II) R128(0): VESA BIOS detected
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) R128(0): VESA VBE DDC supported
XFree86 is not able to detect your mouse.
Edit the file and correct the Device.
Your XF86Config file is /root/XF86Config.new
To test the server, run 'XFree86 -xf86config /root/XF86Config.new'
_________________________________________________________________
Jouez avec MSN Messenger et gagnez des voyages et des XBox !
http://g.msn.fr/FR1000/7550
Reply to: