bonsoir. voila j'ai acheter un apareil photos de marque liftec en usb mais je n'arrive pa a lire ma cartes flash avec. je suis en sarge 2.4.19 Le probleme viens t'il d'une incompatibilite avec ma carte scsi? ou alors c'est que je ne peux pas utiliser le mode scsi? dans se cas si j'achete un petit lecteur carte flash (http://www.ldlc.fr/fiche/PB00013291.html) aurais je le meme probleme? Je remercie par avance les personnes qui pourait m'aider a recuperer mes photos. Alelr A+ <debut des logs> doug:/proc# cat bus/usb/drivers usbdevfs hub usb-storage 48- 63: usbscanner doug:/proc# cat bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI-alt Root Hub S: SerialNumber=d000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS= 8 #Cfgs= 1 P: Vendor=0d96 ProdID=4102 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=21 Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms doug:/proc# cat scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 02 Lun: 00 Vendor: TEAC Model: CD-R56S Rev: 1.0F Type: CD-ROM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: IBM Model: DDRS-39130D Rev: DC1B Type: Direct-Access ANSI SCSI revision: 02 doug:/proc# doug:/proc# ls scsi/sg/ allow_dio debug def_reserved_size device_hdr devices device_strs host_hdr hosts host_strs version doug:/proc# Feb 7 23:03:34 doug kernel: uhci.c: d000: wakeup_hc Feb 7 23:03:34 doug kernel: uhci.c: root-hub INT complete: port1: 93 port2: 80 data: 2 Feb 7 23:03:34 doug kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s Feb 7 23:03:34 doug kernel: hub.c: port 1 connection change Feb 7 23:03:34 doug kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s Feb 7 23:03:34 doug kernel: hub.c: port 1, portstatus 101, change 0, 12 Mb/s Feb 7 23:03:34 doug last message repeated 3 times Feb 7 23:03:34 doug kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s Feb 7 23:03:34 doug kernel: hub.c: USB new device connect on bus1/1, assigned device number 11 Feb 7 23:03:34 doug kernel: usb.c: kmalloc IF c8a06f00, numif 1 Feb 7 23:03:34 doug kernel: usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0 Feb 7 23:03:34 doug kernel: usb.c: unhandled interfaces on device Feb 7 23:03:34 doug kernel: usb.c: USB device 11 (vend/prod 0xd96/0x4102) is not claimed by any active driver. Feb 7 23:03:34 doug kernel: Length = 18 Feb 7 23:03:34 doug kernel: DescriptorType = 01 Feb 7 23:03:34 doug kernel: USB version = 1.10 Feb 7 23:03:34 doug kernel: Vendor:Product = 0d96:4102 Feb 7 23:03:34 doug kernel: MaxPacketSize0 = 8 Feb 7 23:03:34 doug kernel: NumConfigurations = 1 Feb 7 23:03:34 doug kernel: Device version = 1.00 Feb 7 23:03:34 doug kernel: Device Class:SubClass:Protocol = ff:00:ff Feb 7 23:03:34 doug kernel: Vendor class Feb 7 23:03:34 doug kernel: Configuration: Feb 7 23:03:34 doug kernel: bLength = 9 Feb 7 23:03:34 doug kernel: bDescriptorType = 02 Feb 7 23:03:34 doug kernel: wTotalLength = 0020 Feb 7 23:03:34 doug kernel: bNumInterfaces = 01 Feb 7 23:03:34 doug kernel: bConfigurationValue = 01 Feb 7 23:03:34 doug kernel: iConfiguration = 00 Feb 7 23:03:34 doug kernel: bmAttributes = c0 Feb 7 23:03:34 doug kernel: MaxPower = 0mA Feb 7 23:03:34 doug kernel: Feb 7 23:03:34 doug kernel: Interface: 0 Feb 7 23:03:34 doug kernel: Alternate Setting: 0 Feb 7 23:03:34 doug kernel: bLength = 9 Feb 7 23:03:34 doug kernel: bDescriptorType = 04 Feb 7 23:03:34 doug kernel: bInterfaceNumber = 00 Feb 7 23:03:34 doug kernel: bAlternateSetting = 00 Feb 7 23:03:34 doug kernel: bNumEndpoints = 02 Feb 7 23:03:34 doug kernel: bInterface Class:SubClass:Protocol = ff:21:ff Feb 7 23:03:34 doug kernel: iInterface = 00 Feb 7 23:03:34 doug kernel: Endpoint: Feb 7 23:03:34 doug kernel: bLength = 7 Feb 7 23:03:34 doug kernel: bDescriptorType = 05 Feb 7 23:03:34 doug kernel: bEndpointAddress = 81 (in) Feb 7 23:03:34 doug kernel: bmAttributes = 03 (Interrupt) Feb 7 23:03:34 doug kernel: wMaxPacketSize = 0008 Feb 7 23:03:34 doug kernel: bInterval = 01 Feb 7 23:03:34 doug kernel: Endpoint: Feb 7 23:03:34 doug kernel: bLength = 7 Feb 7 23:03:34 doug kernel: bDescriptorType = 05 Feb 7 23:03:34 doug kernel: bEndpointAddress = 82 (in) Feb 7 23:03:34 doug kernel: bmAttributes = 02 (Bulk) Feb 7 23:03:34 doug kernel: wMaxPacketSize = 0040 Feb 7 23:03:34 doug kernel: bInterval = 00 Feb 7 23:03:34 doug kernel: usb.c: kusbd: /sbin/hotplug add 11 Feb 7 23:03:34 doug kernel: usb.c: kusbd policy returned 0xfffffffe Feb 7 23:03:34 doug kernel: hub.c: port 2, portstatus 100, change 0, 12 Mb/s <fin des logs> -- William.famy@laposte.net "Nothing would please me more than being able to hire ten programmers and deluge the hobby market with good software." --Bill Gates 1976-- Nous attendons toujours...
Attachment:
signature.asc
Description: PGP signature