Iomega Zip drive USB
Bonjour,
je viens d'acquérir un Zip Drive 250 usb autoalimenté et je souhaiterais
le mettre en place sur une debian Woody.
J'ai compilé un noyau avec le support USB et le supprot de /proc.
Il semblerait que le noyau reconnaisse le drive puisque un extrait de
dmesg me donne :
uhci.c: bf80: wakeup_hc
uhci.c: root-hub INT complete: port1: 93 port2: 80 data: 2
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: kmalloc IF dad4a280, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=5
usb.c: USB device number 2 default language ID 0x409
Manufacturer: Iomega
Product: USB Zip 250
SerialNumber: 0032484D89050828
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x59b/0x32) is not claimed by any active
driver. Length = 18
DescriptorType = 01
USB version = 1.10
Vendor:Product = 059b:0032
MaxPacketSize0 = 64
NumConfigurations = 1
Device version = 4.00
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0027
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 03
bmAttributes = 80
MaxPower = 498mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 03
bInterface Class:SubClass:Protocol = 08:06:50
iInterface = 04
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 01 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 82 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 83 (in)
bmAttributes = 03 (Interrupt)
wMaxPacketSize = 0002
bInterval = 20
Mais je n'ai rien dans /proc/bus/usb !
Quelqun a-t-il deja tenté cette manip ?
--
Michel COURT
LSIS
Domaine Universitaire de Saint Jerome
13397 Marseille cedex 20
tel: +33 4 91 05 60 45
fax : +33 4 91 05 60 33
email : michel.court@lsis.org
Reply to: