Re: carte ethernet integree sis900 & woody 3.0R1& noyau 2.2.20
Bon, le noyau 2.4.18 etant enfin installe correctement (le lilo.conf pointait
vers un mauvais fichier de ram), j'ai recommence les operations avec la carte
ethernet.
Ca ne marche tj pas...
Quelqu'un sait-il comment la faire fonctionner avec un noyau 2.4.18?
Merci bcp pour toute aide
Fabrice
dmesg ne donne tj rien concernant la carte.
modprobe sis900 me retourne toujours le message:
modprobe sis900
/lib/modules/2.4.18-686/kernel/drivers/net/sis900.o: init_module: No such
device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters
/lib/modules/2.4.18-686/kernel/drivers/net/sis900.o: insmod
/lib/modules/2.4.18-686/kernel/drivers/net/sis900.o failed
/lib/modules/2.4.18-686/kernel/drivers/net/sis900.o: insmod sis900 failed
dmesg
Linux version 2.4.18-686 (herbert@gondolin) (gcc version 2.95.4 20011002
(Debian prerelease)) #1 Sun Apr 14 11:32:47 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fffc000 (usable)
BIOS-e820: 000000000fffc000 - 000000000ffff000 (ACPI data)
BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 65532
zone(0): 4096 pages.
zone(1): 61436 pages.
zone(2): 0 pages.
Found and enabled local APIC!
Kernel command line: BOOT_IMAGE=Noyau_2.4.18 ro root=306 hdc=ide-scsi
ignore=hdc
Initializing CPU#0
Detected 2018.002 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4023.91 BogoMIPS
Memory: 253484k/262128k available (811k kernel code, 8256k reserved, 231k
data, 212k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2018.0983 MHz.
..... host bus clock speed is 100.9048 MHz.
cpu: 0, clocks: 1009048, slice: 504524
CPU0<T0:1009040,T1:504512,D:4,S:504524,C:1009048>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf11e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router default [1039/0962] at 00:02.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 2632 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 2632k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 212k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Journalled Block Device driver loaded
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio
hda: SAMSUNG SP8004H, ATA DISK drive
hdc: PHILIPS CDD6911, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=155127/16/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [9733/255/63] p1 p2 < p5 p6 p7
p8 p9 >
ext3: No journal on filesystem on ide0(3,6)
Adding Swap: 530104k swap-space (priority -1)
Real Time Clock Driver v1.10e
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PHILIPS Model: CDD6911 Rev: B1.0
Type: CD-ROM ANSI SCSI revision: 02
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
sis900.c: v1.08.02 11/30/2001
eth0: Error EERPOM read ffff
lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0646
Subsystem: Asustek Computer, Inc.: Unknown device 8081
Flags: bus master, medium devsel, latency 32
Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if
00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f3000000-f3ffffff
Prefetchable memory behind bridge: fbf00000-febfffff
00:02.0 ISA bridge: Silicon Integrated Systems [SiS]: Unknown device 0962
(rev 04)
Flags: bus master, medium devsel, latency 0
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if
8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 807a
Flags: bus master, medium devsel, latency 128, IRQ 11
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at b400 [size=16]
00:03.0 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f)
(prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 807a
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at f2000000 (32-bit, non-prefetchable) [size=4K]
00:03.1 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f)
(prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 807a
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at f1800000 (32-bit, non-prefetchable) [size=4K]
00:03.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f)
(prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 807a
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at f1000000 (32-bit, non-prefetchable) [size=4K]
00:03.3 USB Controller: Silicon Integrated Systems [SiS]: Unknown device 7002
(prog-if 20)
Subsystem: Asustek Computer, Inc.: Unknown device 807a
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at f0800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100
Ethernet (rev 91)
Subsystem: Asustek Computer, Inc.: Unknown device 80a7
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at 9800 [size=256]
Memory at f0000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at fbec0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc.: Unknown device 80e2
Flags: bus master, stepping, medium devsel, latency 32, IRQ 10
I/O ports at 9400 [size=256]
Capabilities: [c0] Power Management version 2
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev
01) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G550 Dual Head DDR 32Mb
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at fc000000 (32-bit, prefetchable) [size=32M]
Memory at f3800000 (32-bit, non-prefetchable) [size=16K]
Memory at f3000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at fbfe0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Capabilities: [f0] AGP version 2.0
Reply to: