Re: Erreur Usb
> bonjour , j'ai installe une patate upgradé en noyau 2.4.18, la dessus
> j'install une carte PCI pour avoir deux ports USB pour brancher mon
> modem ADSL, je recompile le noyau avec le prise en charge de l'USB, tout
> ce qu'il faut pour que ca marche, quand je fais un cat
> /proc/bus/usb/devices j'obtient bien ma carte :
>
> T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB OHCI Root Hub
> S: SerialNumber=c2800000
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB UHCI-alt Root Hub
> S: SerialNumber=6400
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
>
> par contre des que je branche le modem, les led ne s'allume pas , meme
> celle d'alimentation ( elle clignote rouge puis s'éteint)
> et j'obtient ce message a l'ecran :
>
> sb_control/bulk_msg: timeout
> usb-ohci.c: unlink URB timeout
> usb.c: USB device not accepting new address=2 (error=-110)
>
> ma machine est un K6, quelqu'un sait comment modifier cela pour que je
> puisse avoir mes ports USB ??
Essayes de charger l'autre module uhci:
vires d'abord le usb-ohci avec un rmmod usb-ohci
puis charge le module usb-uhci, modprobe usb-uhci
regardes dans /etc/modules pour changer ca au demarrage
--
Guy-Greg
--
To UNSUBSCRIBE, email to debian-user-french-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to:
- References:
- Erreur Usb
- From: armand jean-michel <jmarmand@wanadoo.fr>